Question about Polycom VSX 7000 Video Conference

1 Answer

Dropped Conferences While in conference, the Polycom VSX 7000 would disconnect and reboot within 10 seconds of the conference. It did this 3 times. Any suggestions?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Re: Dropped Conferences

You need to upgrade the code on your system. This happened to me and upgrading the code fixed it. Good luck!

Posted on Mar 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I'm trying to connect a polycom vsx 700 to this conference room. Same unit is able to connect to local scopia xt5000 with no trouble. If dialing it times out without connecting to an

This is not a dialing but trying to connect to the IP address setup in the system. Start editing the IP address giving the one that you would have already allocated to the device in the Router (i.e. and then reboot it. It should connect then automatically.
Best regards

Dec 16, 2014 | Polycom VSX 7000 Video Conference

1 Answer

3 way video conf

Your VSX 6000 does not support Multipoint. YOu will have to move up to the VSX 7000 or 8000. The VSX 7000 supports MP and the VSX 8000 supports 6 site mp if you have that option installed. DAVID

Dec 12, 2012 | Polycom VSX 6000 (220022222001) Video...

1 Answer

My VSX 7000S does not recognize the microphone. It is connected to VSX\r\ncamera by the brown RJ11 cable with ferrite end to the camera but no sound is picked up and system status indicates "no...

You need to go into the audio settings via
Admin Settings
Audio Settings
and make sure Enable Polycom Microphone is checked off.
Reboot and see if your microphone is recognized.

Jan 13, 2011 | Polycom VSX7000 Videoconferencing System...

1 Answer

I have polycom 7000 with release version of 9.0.1 and second party having Polycom unit of 700 with release version now i am facing the poor video quality while connecting. Bandwidth at another end where...

Verify the uplink / download bandwidthon the broadband link.Broadband link do not have symmetrical upstream/downstream speeds. Perform test to verify.
Try non-peak hrs.
Check if latency is consistent.

Oct 14, 2010 | Polycom VSX 7000 Video Conference

1 Answer

Fuzzy camera picture for a polycom 7000 camera. Will not focus unless zoomed all the way out

Try reseting the camera, power it down, wait 30 seconds then power it back up again.

Jun 10, 2010 | Polycom VSX 7000 Video Conference

1 Answer

Polycom VSX 7000 will not turn on

Hopefully the problem was resolved. Call Polycom to see if it under warranty. Call me at 415.659-8178 if it is not. Maybe I can help. David

Feb 17, 2009 | Polycom VSX 7000 Video Conference

1 Answer

Polycom vsx 7000

no the power supply is propreitory( has multiple voltages) & is not advisable, u could blow up ur expensive confeencing equipemt.polycom has designed it in that manner!!

Jan 19, 2009 | Polycom VSX 7000 Video Conference

4 Answers

Forgot the polycom VSX 7000 password - how to reset

The polycom didn't allow for numbers, only letters.....
How do I do password recovery in this case?

Dec 17, 2008 | Polycom VSX 7000 Video Conference

1 Answer

VSX 7000 will not complete boot sequence

this looks like a power issue.replace/repair the power adapter before u send it for repairs to POLYCOM, they will charge u a BOMB

Nov 25, 2008 | Polycom VSX 7000 Video Conference

Not finding what you are looking for?
Polycom VSX 7000 Video Conference Logo

Related Topics:

824 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Conference Phones Experts

Danny Nagdev

Level 2 Expert

47 Answers


Level 2 Expert

61 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Polycom Conference Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides