Question about HP LaserJet 1150 Printer

3 Answers

Why do all pages print onto one page when i hit the print button in a multipage document

All my pages are printing onto the 1 sheet of paper. I can print multiple copies of a page with no issue it seems to be only if the pages are differently numbered i.e a 10 page document will print the 10pages onto 1 sheet of paper but 10 copies of just page 1 of the same document will print with no problems onto 10 sheets of paper.

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 20 questions.


    An expert that has over 10 points.

  • Expert
  • 55 Answers
Re: why do all pages print onto one page when i hit the...

I guess you are using word. In that case the default driver you use and comes standard with windows is flawed. Download a new one from HP.

Posted on Oct 24, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: why do all pages print onto one page when i hit the...

My friend reverted the automatic updates from MS done on the 24th and reinstalled the HP printer drivers... works fine now.

Posted on Oct 25, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 244 Answers
Re: why do all pages print onto one page when i hit the...

Hi scottish,

Absolutely, there is no problem with your printer. Please try to check your document it is possible you changed the setting of your page setup. Try to print a new document probably two pages just for testing, I am sure you can print it exactly what you need.

If you still experience the problem, please post again any further question's you need.

Best regards,


Posted on Oct 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What causes the printing to be cut off around the page edges on my Kyocera FS 4020DN?

when we want to print from email then
there is a print button within email if self probably right side of email which one is opened
a small print symbol is there try with these button
it opens a new widows from which good print can done

Aug 19, 2014 | Kyocera 1102J22US0 Model FS-4020DN Laser...

1 Answer

Paper Jam in Duplex mode when printing more than 1 sheet

check between the rollers there will be small bits of paper jammed in that is the reason.

Sep 09, 2008 | Minolta magicolor 2350 Laser Printer

1 Answer

Printer name :hp Laser jet 1300 the print

this printer prints a multipage document on 1 page everytime

Oct 21, 2009 | HP LaserJet 1300 Printer

1 Answer

The printer is feeding a blank sheet of paper between printed sheets. How do I rectify this?

This causes the printable area on the page to be that much less (10 3/4 or 10 1/2 on an 11 inch page). The software thinks the paper is 11 inches long and keeps track, down to the micro inch, where it is on the paper. When it reaches the 10 1/2 inches, your printer calls the page done and ejects it. However, the software thinks there is still another 1/2 inch to print (usually the footer area). Now when you insert a new sheet of paper, the software finishes printing the rest of the page (normally a blank footer) and form feeds to the next sheet. To correct what the software thinks the paper size is, you need to run the Preferences application and change the default settings. Select the Printer button. In the next window, select the 'Change Defaults....' button. Change both the Document size and the Paper size to a height of 10.875 and click OK. Try a new document to see if the paper size is correct. You may need to go back and change the height a few times until it is correct (the height changes in .125 increments). Usually either 10.875 (for 1/4 inch forced top margin printers) or 10.75 ( for 1/2 inch forced top margin printers) will work.

Oct 13, 2009 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

Unexpected size in tray 2

whenever i took printout of a multipage file of Powerpoint. Everytime i have to preses the ok button to proceed with the print. because every page an eror comes displaying on screen of printer "UNEXPECTED SIZE IN TRAY 2" when i press the OK button it start printing the page. everytime i have to press the ok button to take print out. For example if i give a print command to a file that is having 15 pages. i have to press 14 times the ok button to complete the printing of 15 pages. pls help me in this

May 14, 2009 | HP LaserJet 2840 Printer

1 Answer

Brother HL1250 won't print multiple pages

there are two reason behind the problem. 1.drum & 2.Fuser unit.
solution no 1.
In this printer the dram attache with the tonner. at first separate the dram unit from tonner. open the drum and clean the OPC carefully and also clean the blade. and re-assemble the tonner & drum. i think it will work for u.

solution no 2.
change the fuser unit.

Dec 01, 2008 | Brother HL 1250 Laser Printer

2 Answers

Will not print test page or documents

  • Make sure the printer is turned off and the paper-release lever is pushed back to the single-sheet position. Raise the paper guide upright.
  • While holding down the LF/FF button, turn on the printer. The PAUSE light flashes.
  • Slide the left edge guide until it locks in place at the guide mark. Next, adjust the right edge guide to match the width of your paper.
  • Slide a sheet of paper down firmly between the edge guides until it meets resistance. The printer loads the sheet automatically.
  • Press the PAUSE button. The printer begins printing the self test.
  • To stop printing temporarily, press the PAUSE button.
  • To end the self test, make sure the printer is not printing. Press LF/FF to eject the sheet; then turn off the printer.

Jul 04, 2008 | Printers & Copiers

1 Answer

Epson Stylus Pro 2200 printer help

I have the same problem with custom sizes. Also, some sizes are unavailable. I did get a custom size working by setting the margins to .25,.25,.25,.45,

Apr 13, 2008 | Printers & Copiers

2 Answers

Printing an A3 document on an A4 printer

Set your paper size to A3 - it should print out the docs on two seperate sheets of A4.

Oct 11, 2007 | Konica Minolta Magicolor 2450 Printer

3 Answers

Cannon MP160 How to Print both sides of the Paper???

Set Duplex Printing (Windows) For details on how to set duplex printing, see below: 1. Select 'Properties' from the Print dialog. Note: Properties may be indicated as Advanced, depending on the application software. 2. Click the Page Setup tab. 3. In the Printing Type section, select 'Normal-size Printing', 'Fit-to-Page Printing', 'Scaled Printing', or 'Page Layout Printing'. 4. Select 'Duplex Printing'. Note: When a media type other than Plain Paper, Photo Paper Plus Double Sided, or Postcard is selected in the Media Type menu, duplex printing cannot be performed. 5. Specify Staple Side. 1. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position. 2. Click the Staple Side drop-down arrow and select the setting. If you want to change the setting, select another value from the list. 3. If necessary, click Specify Margin... and set the Margin width 6. When the setting is completed, click the OK button at the bottom of the window. Note: If a media type other than Photo Paper Plus Double Sided is selected for Media Type on the Main tab: The document will be printed on one side of a sheet of paper when printing starts. When printing is complete, reload paper according to the displayed message and then click OK. The document will be printed on the opposite side. If Photo Paper Plus Double Sided is selected for Media Type on the Main tab: The document will be printed front and back alternately for one sheet at a time, when printing starts. Load the paper according to the displayed messages. 7. You will be prompted, while printing, to remove the printed page and reload it in the ASF. 8. Dependent on the number of pages to print, you will need to repeat step 7 until all pages have printed. Back to Top

Sep 10, 2007 | Printers & Copiers

Not finding what you are looking for?
HP LaserJet 1150 Printer Logo

1,346 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94039 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides