Question about Xerox Phaser 8200 Laser Printer

1 Answer

Keeps restarting My printer keeps restarting - never completing the restarting process. It started this randomly so we shut it off and unplugged it. Kept it unplugged for several hours. Then when we plugged it back in and turned it back on it made a horrible "screeching" noise (like a loose belt makes on a car?) and then just cycles through the restart process and warming up - never completing either.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I do not know about the screeching part, that could be part of the problem or completely independent of the problem. When my machine kept repeating the "startup" process, it was because my bulbs went out. The printer then would never get warm enough to melt the ink to begin printing, so it would just keep restarting, and restarting the warming up process. One way to tell is to take off the side cover. Then peer into the side and see if you see a bright light - which would be your bulbs. I have no idea though what to tell you about the screeching thing.

Posted on Aug 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dryer shutoff , but will restart ok


Motor is overheating...the simplest solution may be lint plugging the holes and windings of the motor. Unplug Dryer, disassemble and vacuum motor completely. If this does not resolve problem you will likely need to replace MOTOR.

Nov 16, 2015 | Dryers

1 Answer

Printer prints random characters


Hi Erica,Try to shut it off, but if you can't, unplug it. Then try canceling it and plug it back in.
In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On :
Brother Printer Support

Feb 06, 2014 | Brother Office Equipment & Supplies

1 Answer

Random Restarting Issue with Sony Vaio VGC-RB30


send it in to check the fan inside if not cooled it could shut down and start back up when cooled

Nov 29, 2013 | Sony VAIO RB30C (VGCRB30) PC Desktop

1 Answer

Hi, My Samsung R580 I3 JBB2-US keeps on shutting down. If I close the lid when I re-open it shuts down & I have to restart or it freezes and I have to force restart. Sometimes when I boot up it...


Hi,
You can try go to Start - Control Panel - Power Options and check what you want computer do when you close the lid of your laptop. Fix that and restart laptop to apply the setting.
If the boot up not complete and restart by itself, in my opinon, there is something wrong on the start up process, could be hardware malfuctions, could be a software not compatible. Try check the start up process to see.(use Start- Run: msconfig)
If this happen often, you should call the Samsung customer services to find out. Laptop i3 should still under warranty.

Hope this will help.
Thanks for reading

Jul 20, 2011 | Samsung R580 Notebook

1 Answer

Shutdown problems


I assume it is not shutting down. Do a complete reset, unplug computer from wall push power button in for 3-5 seconds, then plug it in and restart the machine. Then let it complete the boot up process then go to start and shut it down again see if it shuts down now. Thanks for the question hope this assists you. John

Jan 21, 2011 | Gateway DX482203 (PTGA002009) PC Desktop

1 Answer

Printer keeps printing out a Google page!!


This must be a memory issue unplug the usb cable and plug from outlit, and restart computer, wait about 5 minutes then plug the cables back in.

Jul 13, 2010 | Brother MFC 490cw Color Inkjet...

2 Answers

Model D52W135D shuts off and restarts


one big resistor is on power supply you need resolder

Dec 16, 2009 | RCA D52W136D 52 in. TV/DVD Combo

1 Answer

My HP PhotoSmart C6150 printer keeps restarting.


I had this same problem with my C6180. Printer was well out of warranty so I removed the three black torx screws holding cover over mother board. I then removed screws holding mother board to chassis and found a 330 uf 10V capicator that was swelling. I replaced the capicator at a cost of $1.70 and everything works fine now. Better than buying a new printer.

Oct 01, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Ink system failure & keeps shutting down & coming on its own.


Do the following, let me know if it clears or not:
  1. Press the On button to turn the printer off.
  2. Unplug the power cord from the back of the printer.
  3. Remove all the ink cartridges.
  4. Wait two minutes.
  5. Plug the power cord into the back of the printer.
  6. Press the On button to turn the printer on.
Install the ink cartridges when prompted.



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Jun 12, 2009 | HP Photosmart C5180 All-In-One InkJet...

Not finding what you are looking for?
Xerox Phaser 8200 Laser Printer Logo

1,105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...