i recently discovered a problem with my wireless controller. I found that the lights on the controller would just keep flashing until you remove the power pack. This also was happening with my wired controller. I went through all the instructions of pairing the controllers to my xbox 360 but nothing seems to work. You also can not turn the console on by the wireless controller. Have you any ideas. Please help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1 Disconnect all accessories and wired controllers from the Xbox 360. 2 Hold the "Guide" button down for three seconds on any wireless controllers, then respond to the prompt on your television screen to disconnect the controllers from your system.3 turn on the wireless headset by pressing the "Power" button in the center of the earpiece. 4 Press the "Connect" button on the front of your Xbox 360 system. 5 Press the "Connect" button on the wireless headset. The ring of lights around the power button of the Xbox 360 system should spin and blink once. One of the lights should remain lit up, indicating the port number that the headset is using. If you do not see any lights on the system, you may have a faulty wireless headset.6 Press the "Guide" button on your wireless controller to reconnect the controller to the Xbox 360 system. If you are using a wired controller, you can plug it back into the system.7 Press the "Connect" button on the top of your wireless controller to sync the controller with your system. You should see the connection light around the "Guide" button on the controller light up, indicating which port you are connected to. You should also see a corresponding port light in the ring around the power button of your Xbox 360 system 8 Press the "Connect" button on the wireless headset until the port light on the headset matches the light on the controller and Xbox 360 system. For example, if you are the first player, the light for port number one should be lit up on the Xbox system, the controller and the headset. When all lights correspond, your headset should be properly connected.
22 Feb 2007 ...Xbox 360 Wireless Controller cost 11 Dollars to make ... "Future drivers available for Windows Vista™ and Force Feedback for the Wireless Racing Wheel. ... and profiles are available for free download from their forums. ... digg.com/.../Xbox_360_Wireless_Receiver_for_Windows
To connect the controller to your Xbox 360 console, follow these steps:
Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller.
Make sure that your Xbox 360 console is turned on. If your Xbox 360
console is not turned on, press the power button. The power button is
the large round button on your Xbox 360 console.
On the Xbox 360 console, press and release the Connect button. The Connect button is the small round button on the Xbox 360 console.
On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.
After the Ring of Light spins and flashes one time on the
controller and on the console, the controller is connected. The
quadrant on the Ring of Light that remains lit indicates the position
in which the controller is connected.
Hello my name is Tim Ehrhart, If the reciever is not lighting up then it is dead, you can try to take it to walmart and exchange it for a working one, they are usualy good at swapping out and if they give you a hard time buy a new one and return it with the old reciever instead of the new one. I hope this helps you.
More than likely one of the microswitches inside the controler has colapsed, making it seem like you are always pushing the control that direction.. Also I have seen the wires pulled out of the top of the controller from people constantly wrapping the wire around the controller when not in use - this can damage the controller and make it act up as well.
You must sync the 360 with your controller. Turn on your 360 and your controller. Push the little black button on the front of your console, then hold the little tiny button on the top of your controller for a few seconds. This should sync them.