Question about Hotpoint Aquarius WD640 Front Load Washer/Dryer
The machine keep displaying f-07 and stops working
A few reasons for this, faulty heater, broken wire, faulty pressure switch or faulty main control board (the heater relay is on the main control board).
There is no reset for this.
Unplug the appliance and take the rear cover off.
Check the wiring to the heater and thermostat. Give the wires a good tug as they can break internally and look ok.
If you have a multimeter, test the heater, it should read around 25 ohms.
Take the top off the appliance, locate the pressure switch (has a thin tube on it), give it a few good taps with your screwdriver handle.
Finally, take the main control board out (bottom left when viewed from the rear) and one plug at a time, take them off, clean and tighten them, plug them back on.
If everything checks out ok, then it's likely the main control board is at fault.
Posted on Oct 01, 2009
Hi...sorry to be the bearer of bad news, but that code relates to a stuck heater relay which usually means replacing the computer board :( I would check to see if you have free five year parts warranty (it will say in the back of the hand book), then call Hotpoint. They charge nearly £100 to come out but that is the cost of a board anyway!
Posted on Jun 03, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 03, 2015 | Office Equipment & Supplies
Hey friend, thanks for your inquiry!
I see your Frigidaire washer is displaying an error code "e5e". However, it appears "e5e" is an invalid error code. Let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes.
If resetting the power does not correct the issue, could you please inform me of the new error code or if your dishwasher continues to display "e5e" you may want to seek assistance from a professional for proper repairs. -Matt
Oct 18, 2014 | Frigidaire Washing Machines
Jul 28, 2017 | Washing Machines
Jun 20, 2011 | Washing Machines
Nov 19, 2010 | Panasonic FP-7845 Black and White Copier
Feb 16, 2010 | Hotpoint Washing Machines
Oct 26, 2009 | Krups Small Appliances Espresso Machine
222 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: