Question about Motorola Mobility Q

1 Answer

MotoQ does not start up

Hi,
My MotorolaQ froze up, does not start up. All I get is the battery charging picture, I have tried a reset following instructions from MotorolaQ forum, but that also does not work. Can you please help?

Thanks.
Brij

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

Your system software / firmware has become corrupted. You need to download and install replacement firmware for your phone. You need to choose the correct firmware for your exact model and service provider / carrier for it to work.

I wrote fixya tip on how to do this a few months ago, the links are below. But don't use the verizon firmware unless verizon is your carrier - get your carriers firmware from Motorola's MotoQ website.

Or, just take it into your service providers store and get them to do it.

I hope that helps.
________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P100 was working took 1 picture and froze open. white screen won't charge


Perhaps you have an empty battery?
Just remove the battery and try charging it on an external charger. When it is charged, try again. The camera should start with retracting the lens. Perhaps you again should power down and remove the battery for a few seconds after that, but just try it.
Switching of a camera causes it to start again, like a cold boot from a computer.
Monitor your battery, because if the camera shuts down very soon after that, perhaps you need a new battery?

May 05, 2014 | Nikon Coolpix 4600 Digital Camera

Tip

Motorola MotoQ Verizon Firmware Update Download


Download Motorola Moto Q Verizon Firmware Update


c3dc4c8.jpg

Would you like to update the Verizon system software of the Motorola Moto Q Cell Phone?

Do you need to reflash the Verizon firmware of your frozen Motorola Moto Q Cell Phone?

Follow this link (& click FREE) to download a pdf version of the Motorola Moto Q Cell Phone upgrade documentation.

I hope that helps.
____________________________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

on Jul 14, 2010 | Motorola Mobility Moto Q

Tip

Motorola MotoQ Manual Download


Download Motorola Moto Q Manual


c3dc4c8.jpg

Would you like to review the features of the Motorola Moto Q Cell Phone?

Have you lost your Motorola Moto Q Cell Phone Users Manual?

Would you like a digital, searchable, pdf version of the Motorola Moto Q Cell Phone Owners Guide?

Follow this link
(& click FREE) to download a pdf version of the Motorola Moto Q Cell Phone documentation.

I hope that helps.
____________________________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

on Jul 14, 2010 | Motorola Mobility Moto Q

1 Answer

My tablet wont turn on


hello,

try the following:
1.find the reset button and press it
2.if the tablet is not turn on,plug the cable in charge the battery then try option 1

Jan 15, 2014 | Computers & Internet

1 Answer

Tablet froze and now doesnt restart


Leave your tablet charging for a hour minimum. The battery might be so dead it has no power to start up at all. You get in to recovery mode do restore to factory settings.

Jun 02, 2013 | Coby Kyros 716829701508 Tablet PC

1 Answer

I tried to master reset, the phone froze, so i took the battery out and now it will not turn on. it gets to the last little tiny bit of loading and freezes.


hi mate
start the phone without the sim, and when the insert sim screen comes up, just put in the following codes
*2767*2878#
then
*2767*3855#
phone will reset, and should fix the problem.
If this was useful leave a good testimonial
cheers nick

Sep 09, 2010 | Samsung Memoir SGH-T929 Cell Phone

1 Answer

Frozen


I can help you with your Motorola Moto Q boot screen problem.

What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence.

This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware.

The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.)

If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware today as an example - Motorola's website has about ten different US carrier firmwares for their MotoQ phone. If you are in the US, then the firmware below is the correct version for you.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

May 26, 2010 | Motorola Mobility Moto Q

1 Answer

The MotoQ powers on briefly and then shuts down


I can help you with your MotoQ.

Your system software / firmware has become corrupted. You need to download and install replacement firmware for your phone. You need to choose the correct firmware for your exact model and service provider / carrier for it to work.

I wrote fixya tip on how to do this a few months ago, the links are below. But don't use the verizon firmware unless verizon is your carrier - get your carriers firmware from Motorola's MotoQ website.

Or, just take it into your service providers store and get them to do it.

I hope that helps.
________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jan 04, 2010 | Motorola Mobility Moto Q

1 Answer

My phone froze so i took out the battery and put


I know this is a little obvious but it sounds like the battery is not charged or will not hold a charge. Charge or replace the battery. Your cellular store might let you try out another battery just to test things out.

Another possibility is that the phone is damaged from getting wet or dropped. If this is the case you must let it fully dry out or have it repaired.

Finally, it may just need a hard reset. This will reset the phone to its original settings and will erase any data that you have stored on it.
Instructions are available at Palm support. Start here:
http://kb.palm.com/wps/portal/kb/na/deviceselector/page_en.html#NA

I hope this helps.

Jul 20, 2009 | Palm Treo 750 Smartphone

2 Answers

My motoq doest not turn on even it has full charge and when i connect with usb cable it shows only window mobile and it goes turn off


Your system software / firmware has become corrupted. You need to download and install replacement firmware for your phone. You need to choose the correct firmware for your exact model and service provider / carrier for it to work.

I wrote fixya tip on how to do this a few months ago, the links are below. But don't use the verizon firmware unless verizon is your carrier - get your carriers firmware from Motorola's MotoQ website.

Or, just take it into your service providers store and get them to do it.

I hope that helps.
________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Oct 27, 2008 | Motorola Mobility Moto Q

Not finding what you are looking for?
Motorola Mobility Q Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Computers & Internet Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

 Paul Flint
Paul Flint

Level 1 Expert

12 Answers

Tom Chichester

Level 3 Expert

36401 Answers

Are you a Motorola Mobility Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...