Question about HP Compaq Presario V3000T Notebook

1 Answer

Usb device not recognized

Just the mouce is recognized ,I try rinstaling usb controller device and restart ,after that all the devices have been dettected ,but when i conect any device the same message display "not recognized "

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

Try updating your usb devices. also check whether your bios is updated. if not, download the bios from the HP site, key in your machine model then look for the bios and install it.

copy and past the link provided below to lead you to HP drivers/software. then choose which OS you use then downlaod the usb devices drivers and bios. After downloading, install the driver and it will ask you to restart your machine.

link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3180329&lc=en&cc=us&dlc=en&submit.y=4&submit.x=7&lang=en&cc=us



Posted on Jun 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to Repair USB Flash Drives Broken, Unrecognized, Not Detected?


hi Jhon.
this is all i could find out.
Navigate Control Panel -> System -> Device Manager -> Disk drivers. 3. Find and select your USB device, right click and first choose "Uninstall" and then choose "Scan for hardware changes" to refresh the drivers. After all the operations, you will find USB not recognized issue is fixed and the flash drive is detected.24 Jun 2016

Repair & Recover USB Flash Drive not Recognized or Detected ...

https://www.easeus.com/resource/usb-flash-drive-not-recognized.html


How can I fix USB device not recognized?Method 4: Reinstall USB controllers.Select Start, then type device manager in the Search box, and then select Device Manager.Expand Universal Serial Bus controllers. Press and hold (or right-click) a device and select Uninstall. ...Once complete, restart your computer. Your USB controllers will automatically install.Error: "USB Device not recognized" when you try to access a USB ...https://support.microsoft.com/.../error-usb-device-not-recognized-when-you-try-to-acces...Search for: How can I fix USB device not recognized?

how to repair usb flash drive not recognized Google Search

Nov 30, 2017 | Electronics - Others

Tip

How To Fix Usb Device Not Recognized in Windows


Sometimes, when you plug a USB device to your computer you may receive a Usb Device not recognized or usb port not working pop up message. If your USB device is not detected, then we will show you how you can troubleshoot usb not recognized error.

Follow Quick Steps To Resolve Usb Not Recognized Error Windows:

Press "Windows" + "R",a run window will open
In the "Open" box of the run window type "devmgmt.msc" and press "Enter"
This will open theDevice manager
Click on the arrow besides "Universal Serial Bus controllers"
Right click on each USB port and then click on "Uninstall"
Restart your computer and wait for Windows to re-installs USB controllers.
Try to connect yourUSB deviceagain.
How To Fix Usb Device Not Recognized In Windows 7 8 1

on Jan 28, 2015 | Computers & Internet

1 Answer

Drive not recognized device


  1. Click Start, then type device manager in the Search box, then click Device Manager.
  2. Expand Universal Serial Bus controllers. Right click a device and click Uninstall. Repeat for each device.
  3. Once complete, restart your computer. Your USB controllers will automatically install.

Nov 20, 2013 | PQI 8GB PQi U273 USB 2.0 Drive Metallic...

1 Answer

Windows Vista does not recognized the Brother HL-2240.


hi Markaz.
you can try is to open Device Manager, expand USB Serial Bus Controllers, right-click on USB Root Hub and then click on Properties. Click on the Power Management tab and uncheck the Allow the computer to turn off this device to save power box.
or read up more at this link.
How to Fix USB Device Not Recognized in Windows

What do I do if my USB device is not recognized? Method 4: Reinstall USB controllers.
  1. Select Start, then type device manager in the Search box, and then select Device Manager.
  2. Expand Universal Serial Bus controllers. Press and hold (or right-click) a device and select Uninstall. ...
  3. Once complete, restart your computer. Your USB controllers will automatically install.

Error: "USB Device not recognized" when you try to access a USB ...

https://support.microsoft.com/.../error-usb-device-not-recognized-when-you-try-to-acces... Search for: What do I do if my USB device is not recognized?

or this link.
Windows does not recognize the USB device Google Search

Dec 02, 2017 | Brother HL-2040 Laser Printer

1 Answer

Usb device not recognized


Hi,

The best way to resolve the issue is to uninstall all the USB port. To do so:

Click Start> Control Panel> Hardware and Sound>Device Manager (click View hardware and devices)> Click the (+) sign in front of USB COMPOSITE DEVICES to expand it, you will a list of USB devices, right click on each of them & click UNINSTALL and then restart the computer.Once the computer is restarted wait for couple of minutes and then try to use a USB device. You should be back in business.

Thanks and regards,
Jitha

Feb 04, 2011 | Computers & Internet

1 Answer

Gateway 310 s won't recognize a cd


Hello,
Method 1: Initiate recognition of the USB device by using Device Manager loadTOCNode(2, 'workaround'); To initiate recognition of the USB device by using Device Manager, follow these steps:

1. Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
2. Click to select your computer as the location for the scan.
3. On the Action menu, click Scan for hardware changes.

Windows XP recognizes the new device.
4. Close the Device Manager window.

If this method resolves the issue, you are finished.

If this method does not resolve the issue, go to method 2.
Method 2: Disable power management of the USB hub loadTOCNode(2, 'workaround'); Note If you perform the following procedure, you may also reduce the battery life on a portable computer.

Use this method if method 1 does not work. To disable power management of the USB hub, follow these steps:

1. Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
2. Expand Universal Serial Bus controllers.
3. Right-click a USB Root Hub in the list, and then click Properties. The USB Root Hub Properties dialog box is displayed.
4. Click the Power Management tab.
5. Click to clear the Allow the computer to turn off this device to save power check box, and then click OK.
6. Repeat steps 3 through 6 for each USB Root Hub in the list.
7. On the Action menu, click Scan for hardware changes.

Windows XP recognizes the new device.
8. Close the Device Manager window.

If this method does not resolve the issue, go to method 3.

Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
Uninstall all the usb controller from USB controller
and now restart the computer.

If this method does not resolve the issue, go to method 4 .
Method 3: Restart the computer loadTOCNode(2, 'workaround'); To initiate recognition of the USB device, first unplug the USB device and restart the computer. Then, wait five to ten seconds before you plug the USB device into the computer or hub. Windows XP recognizes the new device.

Hope this helps.

Jan 14, 2011 | Gateway 310 S PC Desktop

1 Answer

I just bought a new Gateway NV53 laptop but my P4350 Lexmark all in one printer does not recognize any of the USB ports.


Did you check whether the USB ports are recognizing other USB devices such as Microvault or Flash Drive? If all other USB devices are recognized except the Printer, then reinstall the USB Drivers. You can uninstall the USB drivers from the Device Manager and restart the Computer. The USB Devices are listed under Universal Serial Bus Controllers in the Device Manager.

Jul 10, 2010 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

My laptop dose not recognice my mouce...... it says device unknown.......... the mouse works on any other system......... i have a 64 bit vista .... what do i do


Check whether you are having the USB controllers installed correctly or not. To check this navigate to device manager and in that check for the USB controllers , then right click the USB controllers and then uninstall them , then goto "Action" Tab and perform "Scan for Hardware Changes" then the USB controllers are installed properly.

Oct 21, 2009 | KEIO PS2 Optical Scroll Mouse

2 Answers

In vista , when i plug usb message display usb can't recognize


Method 1: Use Device Manager to scan for hardware changes loadTOCNode(2, 'resolution'); Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.

To scan for hardware changes, follow these steps:
  1. Click Start, and then click Run.

    Note If you are running Windows Vista, click Start, and then use the Start Search box.
  2. Type devmgmt.msc, and then click OK. Device Manager opens.
  3. In Device Manager, click your computer so that it is highlighted.
  4. Click Action, and then click Scan for hardware changes.
  5. Check the USB device to see whether it is working.
If scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2. uparrow.gifBack to the top Method 2: Restart the computer loadTOCNode(2, 'resolution'); If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working.

If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3. uparrow.gifBack to the top Method 3: Disable and re-enable the USB controller loadTOCNode(2, 'resolution'); Use Device Manager to disable and re-enable all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition. The USB controllers represent the USB ports in Device Manager. If you are not comfortable with advanced troubleshooting, try the steps in the "Workaround" section.

To disable and re-enable the USB controllers, follow these steps:
  1. Click Start, and then click Run.

    Note If you are running Windows Vista, click Start, and then use the Start Search box.
  2. Type devmgmt.msc, and then click OK. Device Manager opens.
  3. Expand Universal Serial Bus controllers.

    Note You might have to scroll down the list to find this item.
  4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
  5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.
  6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
  7. Check the USB device to see whether it is working.
If the USB port recognizes the device and if you can use the device, you are finished.

If this method fixed the problem, you are finished. If this method did not fix the problem, go to the "Workaround" section.

Aug 25, 2009 | Microsoft Windows Vista Ultimate Edition

Not finding what you are looking for?
HP Compaq Presario V3000T Notebook Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

pontelemon
pontelemon

Level 3 Expert

538 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...