How do i pair my uniden un127 to my iphone

Hello Brandon,
Enclosed is a link that may assist you in pairing the monitor to the camera.
Best of luck,
JP
https://www.manualslib.com/manual/388634/Uniden-Udw20553.html

Please note we do not test our products with third party accessories/products.

Make sure that the headset is not paired with the iPhone (turn off Bluetooth on your iPhone temporarily). Follow the same procedure you used to pair the iPhone, but this time with your iPad.

I am not aware that Uniden survellience systems pair with cameras other than a Uniden camera. Please provide model number of your Uniden system to help with a solution to your problem.
I understand that GE Add-On Wireless Digital Color Camera 45256 will work only with a GE security system like Ge 45255

I had no problem pairing my IPhone 5S. I was even able to pair my old IPhone 4. I tried the old IPhone 4 after seeing this post. what kind of problems are you having pairing the IPhone and what version is it? All I did was turn my Bluetooth on on my IPhone then i pushed the black hone button then hit the settings button on the phone screen then pressed the pairing button then pressed the add to button, once the phone is found it should show on IPhone as Elantra on the IPhone and put in the passkey that it shows on the Elantra screen ( factory default is 0000 ) then the screen in the Elantra will show pairing. then it's paired. then you can go through all the setting after the phone is connected. Just make sure before you get into the car your BLUETOOTH is turned on on your IPHONE or it won't connect till it is turned on and the phone won't connect while your foot is on the brake if you have push start.

If you got it from facebook, you can just return it back to them. They will take it back.

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

see if u can find someone to help u with it

Hi,

Normally yes just as long as the frequency assignment to each channels are the same and no security/locking (such as (CTSS) is in place.

You have to check if the frequency settings of the Motorola matches those of the uniden.

Good luck and kind regards.