Question about Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Turbine/moaning sound and vibration

When I turn the TV on I hear a noise like a turbine/moaning sound and vibration coming from the back of the TV. It lasts for roughly 30 seconds, stops and then continues one more time before stopping. I've had my Samsumg HLP4663W for 5 years and thought this is a sound when the lamp goes out. I ordered a new lamp, put it in and nothing has changed. Do you know what it is and it it's easily fixed?

Thanks!

Chris

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 788 Answers

Hello,
The grinding sound that you are hearing is your color wheel. They can make a noise from a buzz to a power saw type of noise. Usually the set will continue to play with the noise, but it is annoying. You will need to replace the color wheel now.

This is not as easy as the lamp replacement, as you have to pull the light engine to access the color wheel. It is not hard just more work and be careful of the color wheel lenses.



I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate this post with the highest rating, then please comment to this post and I will try to help you further.

Posted on Jun 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brushes wont spin on the vax duel v 124 model and i dont know how to get to the belt to see if it has broken. There is no reset button on here that I can find !!


V124 /124a. Brushes not spinning. A clicking noise can sometimes be heard with this fault. It is likely that the brush drive unit has developed a fault. For the adventurous it is quite straightforward to repair. Ensure the machine is unplugged from the power supply and remove the tanks. Place the machine down on the floor and remove the brush bar. This clicks into place and is easy to lift out. Remove the screws on the base of the machine that hold the red cover in place. These are posidriv self tappers. Remove the clear plastic V assembly from the machine. This is clicked into place to make removal and replacement easy. Locate the turbine assembly and underneath the machine remove the screws that hold this in place. Disconnect the two small rubber hoses on the turbine assembly and gently pry out the turbine. The turbine can be opened up by removing the self tapping screws holding it together. Do this on a well lit bench or tabletop
Gently open up the turbine housing by lifting the black clips slightly. Keep the turbine level while you are doing this. Inside is the black plastic turbine blade. Remove the two gears and the small bearing and place to one side. Inspect the turbine blade for cracks or damage. If cracked the turbine blade can be repaired using a hot soldering iron to 'weld' the plastic. Ensure the repair is smoothed off by using a flat file. A tiny amount of light oil can be applied inside the turbine casing. Then reassemble the turbine blade, gears and bearing and clip the housing together. Replace screws in turbine housing. Refit turbine into the machine Replace machine screws, red cover. clear V assembly clicks back on. Test the machine to make sure that the brushes rotate. If the turbine is beyond repair a new one can be obtained as a spare part

Sep 21, 2011 | VAX Appliances Vacuums

1 Answer

Problem - Dyson Vacuum - Turbine Head DC-23 I have the Dyson Turbine Head DC-23 Vacuum. I love my vacuum. I've had it for 13 months. I have had no problemwith it, until now. Now, every...


Hi there,

I'm sorry to hear you're having difficulties with your DC23's turbine head. If you haven't already got in touch with us directly, I'd encourage you to do so. One of our experts will be happy to run through some troubleshooting over the phone with you to identify the cause of the issue you're experiencing, and will be able to recommend the best course of action. If necessary, we should be able to replace the turbine head under the 5 year warranty, as long as it's been used in accordance with the terms and conditions listed in the user guide.

You can call us free on 1866MYDYSON - or if you email your details to askdysonUS@dyson.com, someone will be in contact as soon as possible. We'll look forward to hearing from you.

Kind regards,

Jack
Dyson Online Customer Support

Sep 07, 2011 | Vacuums

1 Answer

2002 a4 avant 1.9tdi los of power started shaking badly esp light comes on stays on


SOUND LIKE TURBOCHARGER PROBLEMS, TURBOCHARGER IS YOUR POWER HOUSE.SHAKING VIBRATING SHAKING COULD BE WORN TURBOCHARGER TURBINE SHAFT BEARING.LISTEN AROUND TURBO FOR NOISES.

Aug 06, 2011 | 2004 Audi A4

1 Answer

Super super loud vibrating noise loud as race car 110 db i took apart and saw that the screws in the plastic housing surrounding the blower motor had fell out (all of them x4). because of that the...


yes the turbine blades are spinning very fast if the out of ballance this is whats making all the noise it will also shake its self to bits very soon change the turbine fan

Nov 28, 2010 | EuroTech EDC158 Electric Dryer

1 Answer

What could be causing a loud humming inside my


The next time you hear the noise have someone stay there and listen while you go turn off your water main. If the sound continues, then it isnt in the plumbing. Hope this helps.

Apr 03, 2010 | Plumbing

3 Answers

Brushes are not spinning. think the belt is off or broken. how do i access the belt?


There is no belt in this machine. The brushes are turning by an air driven turbine. The turbine has a pivot bushing made of steel inside of it that gets rusty because of the water that is running through it. The turbine will have to be replaced and they are expensive. Unfortunately, replacing the turbine and not a lasting solution. It will do it again and again. It is designed poorly.

Dec 03, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Turbo not working properly, it seems to only go so far then you can hear air rushing out


check the wastegate vacuum diaphragm+hose and wastegate bypass regulator valve and boost pressure recirculation valve.make all hoses is tight.if you losing power remove the turbo check to make sure turbine is turning.if its not spinning fast you will hear air noise.hitting turbine blades.

May 29, 2009 | 2001 Volkswagen Jetta TDI

3 Answers

Moaning noise when I turn left or right in my 2002 VW Passat


Your power steering pump has gone bad. Consider replacing it. I had the same problem before.

It moans when u turn at a stand still but rolls freely when in motion?

Rate this fixya

Mar 24, 2009 | 2002 Volkswagen Passat

1 Answer

Square hole will not turn on my Hoover F7210-900


You have to take the top cover off, turn unit over and from the bottom, remove the screws, 2 of them will be long, they hold the turbine down. Turn it back over and removethe cover. There 2 more screws at the front of the turbine (#23 and the hoses attached to it. Then it will come off.

7b0ec68.jpg

Jul 25, 2008 | Hoover F7220900 SteamVac V2 Upright Vacuum

1 Answer

Hi mine is a f7421-900


Unless something came apart, there is no switch, when you push that knob to turn off the brushes, you are actually moving an actuator arm on the top of turbine. Take the brush block out and there should be a shaft sticking up, if broken off, then replace the brush block. Then look up where the brush block was, tur the unit on, if the square hole is turning then the turbine is ok, if not then there is a problem with it. Take out the screws from the bottom, I believe there is 4 or 6 for the top housing, there are 2 longer screws, they hold down the turbine, take those out also. Turn the unit over, and remove the top cover, near the back of it, on each side, there is a post that the cover goes into, should just pull out. Then ther are 2 more screws on the front of the turbine, unhook the hoses and it will come out. #23 is the turbine.

d7cfb03.jpg

Jul 19, 2008 | Hoover F7425-900 SteamVac V2 Widepath...

Not finding what you are looking for?
Samsung HLP4663W 46" Rear Projection HDTV Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...