chip was replaced and the screen came up distorted. Tried to adjust convergence and tv turned off. Wont turn back on. no sign of burnt transittors or power supply
Hi and welcome to fixya,
it is the colour wheel problem,,,,,,,,,this is common problem please check it ...it may be also cathode ray tube...
thank u.........
Was this helpful?
Yes
No
1 person thought this was helpful
Popular Solutions for Panasonic PT-56WX53 53 in.
Panasonic PT-56WX53 53 in. Rear Projection HDTV-Ready...
PT-56wx33 56 in. No picture, just a green line down the middle. is
this a bad lamp, if so which...
(More)
PT-56wx33 56 in. No picture, just a green line down the middle. is
this a bad lamp, if so which one? Or do i have bigger problems.
I have a panasonic model#PT-56WX33,when I power on tv NO PICTURE,NO SOUND,nothing.Only the red power...
(More)
I have a panasonic model#PT-56WX33,when I power on tv NO PICTURE,NO SOUND,nothing.Only the red power light on tv panel lights up and blinks 5 times ovr-n-ovr.
I have the panasonic ap825 chassis, had the convergence problem, replaced the ics, then now it wont...
(More)
I have the panasonic ap825 chassis, had the convergence problem, replaced the ics, then now it wont boot, it blinks 3 times so i know its something in the convergence circuit, i found 2 bad resistors after the replacement, not smoked but varying resistance readings averageing 1/2 the spec, even being removed from the board and isolated ,but it booted fine before replacement of the convergence ics, is fixing the resistors likely to fix the issue, or did my new chips fry out too, i had no bridges or dry joints,im good at soldiering so im positive thats not the issue,...
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.