Question about Hoover Elite Rewind Bagless Upright VacuumVacuum

1 Answer

Changing the belt

How do I change the belt on my Hoover Elite Rewind?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 126 Answers
Re: Changing the belt

I'm not familiar with that model, as it is fairly new to the market, but the previous models had a plastic plate that covered the roller. There are two clips that must be depressed as you gently pull the plate away from the machine. This will allow the removal of the plate so that the roller can be removed and a new belt installed. This is a new model, so you must have the manual still. You can also check for more instructions and last time I checked, they had a manual download feature available.

Posted on Jan 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What is the belt part no. for a hoover elite rewind?? model no. UH71009RM

If you look up the Hoover page for the UH71009 (the non-remanufactured Elite Rewind), there are 3 different belt model numbers listed. One part number is simply for a 2 pack of the belts. See . Click on the Parts & Accessories tab.

I believe the belt part number is 38528058 , .

I hope this helps.

Cindy Wells

Oct 04, 2015 | Hoover Vacuums

1 Answer

How do I make the noise stop?

Seems like the bearing on the side of the roller has gone bad. If there is a dirt gone deep inside, it is hard to clean it. It can also go bad if the roller hits the uneven surface like the transition strip between carpet and tile. It can unbalance the roller causing it to go off its axis and get misaligned.
This is the roller for the Hoover Elite Rewind

May 20, 2013 | Hoover Elite Rewind Bagless Upright...

1 Answer

The air flow indicator on my hoover elite rewind bagless vacuum shows mostly yellow. we have followed all the directions in the manual - empty dirt cup, cleaned filter, checked two locations for blockage,...

Hi, sounds like you may have a small leak in the vacuum body. After changing the filter etc. turn machine on and run your hands alond vac. body. If there is a leak you will feel or hear it. If leak is found the light should change when you cover it. I hope this helps you./ Its hard to give advice without seeing it. Give it a try then let me know how you are doing. Chris

Feb 09, 2011 | Hoover U5507900 Elite Rewind Bagless...

1 Answer

How do I change the belt for the Hoover Elite

Follow this link to a website that will show how to change belt (it aslo has illustrations). Click first link listed on page.

Hope this helps.

Jan 26, 2010 | Hoover Elite Rewind Bagless Upright...

1 Answer

My HooverDeluxe Elite Rewind became extra loud

If the belt is really worn it can cause that. I wold try changing the belt if you haven't recently. Here are the belts you need:

Hoover Elite Rewind Belts

Nov 14, 2009 | Hoover U6630-900 WindTunnel Bagless...

1 Answer

My hoover elite rewind is making a louder noise and I can smell something burning when I use it. I have replaced the belt but this did not help.

the smell is either the motor or the belt, if motor hope it is under warranty, if belt make sure brush roll spins freely and replace belt, if brush roll not spin freely replace it first

Aug 27, 2009 | Hoover U5507900 Elite Rewind Bagless...

1 Answer

Hoover Elite Rewind belt part number , is this the correct one?

Yes, that is the correct belt. The full part number should be 38528040. This is the correct belt and should fit your U5509/U5507.

Dec 23, 2008 | Hoover Elite Rewind Bagless Upright...

1 Answer

Brush not working

The belt may have broke, down this manula, it shows how to change the belt.

Mar 08, 2008 | Hoover U5507900 Elite Rewind Bagless...

Not finding what you are looking for?
Hoover Elite Rewind Bagless Upright VacuumVacuum Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts


Level 3 Expert

18259 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides