Question about Compaq Presario 5000 PC Desktop

1 Answer

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory

Hi! Just after Y2K, my wife & I bought a Compaq Presario computer, tailor-made, through a special offer on TV. It uses a COMPAQ SPS-BD 1394 Motherboard. As a former tech, 1982-89, with a mainframe peripherals manufacturer who downsized big time in '89, I probably know just enough to be dangerous anymore, but here goes: Some background info, and a description of our problem(s). We appreciate any advice on this: 1. I'm also a musician and former music teacher (got tired of baby sitting!), who writes a lot of his own stuff & orchestrates accompaniments on MIDI software. Eventually learned that our AMD ATHLON processor runs at something like 0.8 GHz, and that something 2 Gig or above is better for creating musical instrument sounds on the computer. 2. For audio and video purposes, including a desire to put a reasonably professional video demo of my stuff on my web site, I maxed out the three SIMM slots and bought a Pinnacle Studio Deluxe video editing program. To catch up with the system requirements, I upgraded from Win 98 to XP (Home Edition), and later downloaded Service Pack 2. So far, so good. The motherboard has five regular expansion slots, plus one for the video card to access the COMPAQ model MV920 19" screen display we ordered with the system, to help with editing music scores on the screen. 3. The video software also needed more horses than our 20 GB original hard drive could handle, so I added a MAXTOR Diamond Max Plus 9 160-GB hard drive and Silicon Image Ultra ATA 133 PCI dual channel controller board, since our system might not recognize HD capacity of over 130 GB without the controller board. I had hoped to configure the Maxtor as a replacement boot drive, but it looks like our system would only support it as a slave. We got along OK with that for awhile, even networking it to a 2.4 GHz HP Pavilion we later bought for my wife to use for her special ed teacher job and for archiving family photos. (I know what you?re thinking: she won?t part with it, and I value my life, so please don?t even go there.) By the way, the network is CAT-5, not wireless, because we use 2.4 GHz cordless phones. But there's a new development... 4. Meanwhile, my brother-in-law died about a year ago, and left us a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron. I had hoped to somehow cannibalize the two Presario systems into one eventually, to max out our options, and especially to take advantage of the new Presario's much higher processor speed. But in the middle of running an educational book sales business for the past 4 years, to support my "music habit", and printing all my business cards, order forms, etc. at home on our Konica Minolta PagePro 1350W b/w laser, I hesitated to upset the apple cart until I had time someday to really dig in to the project & do it right. 5. Well, time doesn't always work that way. Gas prices went nuts, of course, and my book sales business operates like Reader's Digest's "Books Are Fun" program, delivering sample displays of our product to over 300 schools and other client organizations. As a sole proprietor, operating on a consignment basis from my supplier, I had to pay all my own gasoline, with no reimbursement until I could write it off at tax time each year. By Nov. 2007, as customers bought less, because all THEIR money was going into gasoline, it got so bad, I had to pull the plug. So although I'm training for a new "day job" as a truck driver, and continuing to work an old second job as a radio DJ, there's still some time to tackle the project now. But meantime, our system somehow failed to archive stuff to the new Maxtor secondary drive - I apparently didn't have programs & data content properly separated onto different physical drives, or something like that. Bottom line, the 20 GB master drive apparently overloaded, and the Config.sys file became corrupted. 6. Since January 2008, I've gone ahead and managed to set up the Maxtor as boot drive on the faster (Celeron) Presario, even by-passing the ultra-ATA adapter board, and although I'm back to XP Service Pack 1, and somehow unable to properly download SP-2 from microsoft.com, it will still run Microsoft works (which I use a lot for databases of business contacts, tax prep spreadsheets, etc.), as well as Microsoft Internet Explorer and our Outlook Express e-mail. One of the 3 expansion slots is already occupied by a video board, since the motherboard's on-board video connector won't drive our big display. That problem might be just a matter of downloading a new driver from Compaq, I'm not sure. Even so, the two remaining expansion slots might be enough for our sound card, which uses a MIDI adapter cable to access my electric piano and some old MIDI sound modules; plus the final slot for the interface card for the video processing software. So, finally, here are the current remaining problems I'm trying to solve: 6-1. Although we don't currently need to use an expansion slot for networking/internet/e-mail, since the new Presario has an on-board Ethernet adapter that accepts CAT-5, a new problem has developed: the Konica Minolta Page Pro 1350W black & white laser hangs up whenever the CAT-5 cable is connected to the CPU. Unplug it, and maybe re-boot, and you can print fine. By the way, we're still using the old Centronix type of printer interface cable, although the printer is USB compatible, and the new Presario has multiple USB connectors, so we can archive stuff on a flash drive easily. But if we want to archive a hard copy of an e-mail or some web info, or want to save ink by printing something from my wife?s computer to the laser, via the network, we?re screwed. The day before composing this message, I e-mailed Konica Minolta about this, and am waiting to hear from them. But that?s not all? 6-2. I?ve recently added several new contacts to an address / telephone database of business contacts. Suddenly, I?m beginning to see markedly slow performance, plus messages about the virtual memory being low. I?ve learned that the Task Manager has something to do with optimizing the virtual memory, but can?t seem to figure out how to do it, without maybe re-partitioning the physical hard drives, and not sure if I can save current data, or would have to re-load it, after re-partitioning. At first, I thought I might have to return to the old Presario, due to limited number of expansion slots. But even though that no longer appears necessary, I?m wondering if I shouldn?t maybe still return to it, this time due to limited number of SIMM slots - 3 on the old computer, versus only 2 on the new. I did a defrag today (3-18-08), and only one of four partitions seemed to need it. But now, I?m wondering whether or not I can boost virtual memory by re-partitioning. It?s also looking now like the new Presario is failing to recognize a large part of the big Maxtor hard drive. Maybe I didn?t properly partition it to begin with, or maybe the ultra ATA adapter board WILL be necessary, after all, in order to enable full hard drive recognition. I thought an easy solution would be to add another SIMM card, but then I realized that the new Presario has only 2 slots for them, and both are already filled with SIMM cards. So here?s the REALLY insane part: I?m wondering if the OLD Presario has sufficient qualities, like number of memory address bit lines available, and sufficient speed in any other hardware on the mother board to enable swapping out the 2.5 Ghz Celeron processor from the NEW Presario, and installing it in the OLD one. I haven?t gone far enough to see if the microprocessors? physical mounting systems even allows this, like whether they are soldered in, or just mounted in a socket. But I have a notion that these two motherboards are not physically compatible in their real estate enough to allow this kind of a swap - or whether any other factors prohibit this idea. Does anybody know? For what it?s worth, I don?t have a pile of money right now, but can offer a link on my web site, as thanks, to parties that fit in with the site?s family-oriented philosophy. For details, you can e-mail me, at pnquance@arvig.net, and we can discuss the site & maybe refer you to it. Thank You! Patrick ?Pat? Quance (?Kwahnss?) PS: For the many who are saying, ?Get out of the stone age, man - get a new computer - maybe two - a PC and a MAC - and use the MAC for the music, and the PC for other stuff.? - Well, maybe, once I have the money. Commuting long distance to a couple teaching jobs, due to limited openings in my specialty of music, drained our credit cards, and began several years of eliminating them and catching up. Once we can, we?d love to upgrade everything - computers, vehicles, house, you name it. We hope the Class A CDL and driving job will enable this. same computer same motherboard and probably the same cpu. I have an amd athlon k7700mtr51b cpu in a type "A" slot and pc133 memory. I"d like to upgrade them both as much as possible for this motherboard. My wife will be working from home since she is 4 mos pregnant and it is really slow and frustrating right now with 700Mhz cpu and 512Mb of memory. What is the max I can pump into this beast and have it still function?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,666 Answers

I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary. As a former tech, you should know what's needed.

Posted on Jun 06, 2009

  • buysellgb Jan 23, 2011

    DnC Sourcing is to make an Expert of developing products. ---> www.artdnc.com (82) 70-7893-2100)http://www.sourcingbuysell.com
    We have 15 years developing experiences and will implement the advanced products to our customer.
    Electronics, home appliances, sporting goods, medical products, smart phone, General Phones, machine equipment, cattle. Midsize engine
    * Mechanical design, tooling, product design, machine design, reverse engineering (image), product design, MOLD Analysis
    * Processor: AVR series, DSP, FPGA, ARM7, ARM9, etc.
    * Circuit design, PCB ARTWORK Use Program: ORCAD, PADS
    70% Motor Sales ---> www.buysellmotor.net, sourcing everything ->http://www.sourcingbuysell.com

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to buy a matherboard for my compaq presario sr 5610 f


I just replaced the motherboard in a Compaq SR5610F because the capacitors were swollen and the computer was flaky: rebooting, losing devices, etc.

I bought an ASRock N68-CGS FX, about $50 shipped. The processor and memory from the Compaq work in it, and the board fits just fine in the case; in addition, you can devote 256 megs of shared memory to video (double the Compaq board). If you want to upgrade later, it will take a number of AMD 3 or 3+ processors, and there are two DDR3 memory slots.

Dec 03, 2012 | HP Compaq Presario SR5610F Desktop PC

1 Answer

Compaq system board 686,0MB (320756) board manual


That's an old mainboard (Motherboard), used in a Compaq Presario 5716 desktop computer. (And perhaps a few other Compaq Presario's)

1) Uses a Slot 1 (Intel) processor slot.

http://en.wikipedia.org/wiki/Slot_1

2) Maximum Intel Slot 1 processor that can be used, is an Intel Pentium III, with a 100MegaHertz Front Side Bus. (100MHz FSB)
Maximum frequency rate for the processor is 700MHz.
('Speed')

http://www.cpu-world.com/CPUs/Pentium-III/TYPE-Pentium%20III%20%28Katmai%29.html

(Scroll the page down)

3) Ram memory is SDR Sdram at 100MHz. Or also known as PC-100. (168 pin. 82 on each side. Two Locating Notches on bottom. Commonly just known as Sdram, but that is a misnomer)

http://en.wikipedia.org/wiki/PC100

Maximum TOTAL Amount of ram memory is 384MegaByte.
Maximum Amount for each ram memory slot is 128MB.
There are 3 ram memory slots.

4) Do not know what the jumper settings on the motherboard are.

5) Do not know what the Front Panel header pinout is.

6) Can run Windows XP Home Edition, but do not expect a world of performance.

Regards,
joecoolvette

Jun 10, 2012 | Compaq Computers & Internet

2 Answers

Were do I get the manual for Compaq Presario uWave2 K7 Socket 462 Motherboard?


You can download drivers and manuals for HP ( and Compaq) products from the HP website. Go to http://www.hp.com/support and click on the map of the USA.
On the next page, click on United States (English)
Under "Support for your products" either click on "Download drivers and software" or "See support and troubleshooting information".(For manuals)
In the "For Product" box enter the model number of your computer and click on the arrow to the right of the box.
You can now click on the manual that you want to download.
If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please rate my solution using FixYa's "Solution Helpful" rating scale.
Best regards,
Yavacotech

Mar 11, 2011 | Compaq Presario uWave2 K7 Socket 462...

1 Answer

The right type of motherboard for compaq presario 2200 pc


Intel Celeron M (Banias) processors, 32MB or 64MB shared system memory (dynamic) - Does not include IEEE 1394 (Firewire) or TV-out (S-video) RoHS: Original 371793-001 System board (motherboard) - De-featured (DEF) for Intel Celeron M (Banias) processors, 32MB or 64MB shared system memory (dynamic) - Does not include IEEE 1394 (Firewire) or TV-out (S-video) RoHS: Original 371794-001 System board (motherboard) - Full-featured (FF) with support for Intel Pentium M (Dothan and Trailing Bin) and Intel Celeron M (Banias) processors, 32MB or 64MB shared system memory - With IEEE 1394 (Firewire) and TV-out (S-video) RoHS: Original 371794-001 System board (motherboard) - Full-featured (FF) with support for Intel Pentium M (Dothan and Trailing Bin) and Intel Celeron M (Banias) processors, 32MB or 64MB shared system memory - With IEEE 1394 (Firewire) and TV-out (S-video) RoHS: Original

Mar 02, 2010 | HP Compaq Presario 2200 Notebook

1 Answer

What is total of ram memory, for sps-bd 1394 motherboard


Your manual should tell you how large a chip can be put in. It's usually either 1G strips or 2G strips. You have to do some homework.

Nov 15, 2009 | Compaq Presario 5000 PC Desktop

5 Answers

I need BD-70G motherboard driver


please try....

audio:
http://www.mediafire.com/file/214h3ttwewy/compaq presario 3700-AUDIO.rar

chipset:
http://www.mediafire.com/file/iwc3tt1nmtm/compaq presario 3700-chipset.rar

lan:
http://www.mediafire.com/file/iwc3tt1nmtm/compaq presario 3700-chipset.rar

usb2.0:
http://www.mediafire.com/file/y2ykmlzdhzy/compaq presario 3700-USB20.rar

vga:
http://www.mediafire.com/file/jmm5lf3ntmi/compaq presario 3700-Vga-WINXP.rar

Nov 20, 2008 | ASUS M2N-MX Motherboard

1 Answer

Computer won't fully powerup


If you have access to the internet, and a floppy or CD-ROM drive in the notebook, download a memory-test program and write or burn it. If the notebook successfully runs the memory test, then you have reason to consider the microprocessor memory and general motherboard OK, and to suspect the hard drive.
To boot from a CD-Rom you might have to select that option in the notebook's CMOS. By the way, your question did not say if you could access the CMOS setup menu. But try that also.

Jul 14, 2008 | HP Compaq Presario V2000 Notebook

1 Answer

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below


hi dear

why not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and all

oke


cropp

Mar 18, 2008 | Compaq Presario 5000 PC Desktop

Not finding what you are looking for?
Compaq Presario 5000 PC Desktop Logo

757 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...