Question about BenQ MP610 Multimedia Projector

1 Answer

Temp and lamp led turn on after 1 Minute

Hi.
I'm sorry about my english.
I replace the 8cm fan, the previous stop working.
the projector stop working after about 1 minute, and the fan led, and the temp turn on.
the new fan: EZcool EZF8025

what should I do???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,267 Answers

The fan has again got burnt out. Try replacing with the fan of the Benq Brand or a compatible one as depicted in the manual or contact:
Headquarters
16 Jihu Road, Neihu,
Taipei 114, Taiwan
Tel: +886-2-2658-8880
Fax: +886-2-2797-9288 or check up the address from the net regarding your country's support or Authorized representatives close to you and get the details mailed back.................sodeep

Posted on Jun 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Sanyo PLC-XP18 projector and it has recently developed a problem. I was watching a film the other night and the projector just cut out. Now when i try and turn the projector on the the fans...


READY light is green when the projector is ready to be switched on
LAMP is dim when the projector is ON, but goes bright when it reverts to STANDBY.

Check that the lamp cover is fully down and the cover switch is activated

Feb 28, 2011 | Sanyo PLC XP18 Multimedia Projector

1 Answer

Hi. I have a InFocus dp2000x. It has no lamp. I try with a flashlight in the lamp chamber (the flashlight is battery operated) When I turn on the projector with a vga or video input, the power led start...


Hi,
Projectors are designed to be used with a lamp and will turn off when there isn't one present. You would have to purchase a new lamp to use the projector.

Feb 19, 2011 | ASK Proxima Proxima DP2000X Multimedia...

1 Answer

Benq Projector MP721 stops illuminating after about 1 minute on. The lights are as follows: Power: Off, Temp: Red, Lamp: Green. Shortly after the projector shuts off. Thoughts?? My assumption is that the...


it might be dusty enough to hold in the heat. it needs a good cleaning. use canned air. if you still have an issue, the fans might be running too slow or the thermister (temp sensor) may be faulty. sometimes if it gets too hot in there, the thermister needs to be replaced, too.

Sep 11, 2009 | BenQ MP610 Multimedia Projector

2 Answers

Problem with my dell 1200mp projector


if you haven't already try cleaninig the filters

Aug 22, 2008 | Dell 1100MP Multimedia Projector

1 Answer

PD523 no picture, led blinks


Hy !

Seems to be the colorwheel. When a segment is broken, the unbalanced wheel causes vibrations. Costs approx. 100-150$. Take away back and top so you can see if wheel is not complete.

Good Luck!

Jul 07, 2008 | Acer PD523 Multimedia Projector

1 Answer

Infocus projector won't turn on


From the infocus_lp650 manual
Table 2:
Red LED Behavior Explanation
One (1) blink The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
Two (2) blinks The lamp counter hours have exceeded
lamp life hours. Replace the lamp and
reset the lamp hours counter.
Optional Accessories Part Number
Three (3) blinks The projector has shut down the lamp.
Replace the lamp. Contact Technical Support
for repair if replacing the lamp does
not solve the problem..
Four (4) blinks The fan has failed. Replace the lamp (the
lamp module contains a fan). Contact
Technical Support for repair if replacing
the fan does not solve the problem.
Five (5) blinks The projector is overheating. Check for a
blocked air vent. Contact Technical Support
for repair if clearing the air vents
does not solve the problem.

Jun 18, 2008 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

My Viewsonic PJ458D lamp not coming on


I have the same problem before. I found a replacement fan. A computer chassis fan works perfect. It should be 60mmx60mm - plenty in E-bay for about $5.00. Very easy to open the unit to replace the fan. It has 2 fans in a rubber housing. Check which one need replacement.

May 16, 2008 | ViewSonic PJ458D Multimedia Projector

1 Answer

Toshiba TLP671 - lamp red LED


Hi,

It is problem with temperature. So please check with filter and clean it. Other wise check any of the fans are not functioning properly. So check the same and replace

Nov 14, 2007 | Toshiba TLP 261 Multimedia Projector

Not finding what you are looking for?
BenQ MP610 Multimedia Projector Logo

Related Topics:

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment & Supplies Experts

Tom Chichester

Level 3 Expert

33326 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Tony

Level 3 Expert

2600 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...