How do i reset the second bias transfer roller on a Xerox 3535

It simply drives the transfer belt which is required to lay the image down on the paper.

Depending on which Xerox product you have would depend on whether a service tech is required to replace one that has failed or whether it is a roller that can be easily replaced by a non tech saavy individual.

I hope this helps...

replace the fuser or transfer roller

On the 7556 and most other Xerox copiers, follow these steps to reset the counter. You do NOT need to call out a tech.

The supply life counters must be reset when some supplies are replaced.

1. Log in as the System Administrator or Key Operator.
2. Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed.
3. Select the [Tools] tab on the Touch Screen.
4. Select the [Device Settings] button.
5. Select [Supplies], and then under Features select [Supply Counter Reset].
6. Select the required supply item, and then select [Reset Counter].
7. Select [Reset] when the confirmation screen is displayed.
8. Select [Close].
9. Press the [Log In / Out] button on the Control Panel. The Logout screen will be displayed.
10. Select the [Logout] button on the Touch Screen to exit.

Reset the tranfer unit counter,and change the transfer unit chip fuse(located in transfer unit contact house)

ERROR CODE 094-322 RAP Second BTR Retract Failure

The error relates to the Second bias transfer roller not retracting. It could be a fault with the roller but i would open the transfer draw and check the connections and seating of everything and try it again. More often than not this clears the error.

The transfer belt cleanning blade is under the transfer belt.Remove 2 screw and change it.The bias transfer roller is mounted in two bushings,remove the bushings and 2 springs.The fuser unit : upper fuser roller,lower fuser roller and the cleaning rollers.

Just plug the new one.
But you wil need to reset with diagnostic programme.

Hi, you have to reset this code entering into diagnostic mode, If this fault is declared 3 times in succession, print and copy mode will be disabled. In order to clear this condition, reset NVM location 744-003 to 0. Saludos from mexico

You need a Xerox service laptop to communicate with the beast and reset it, that is what I was told by a Xerox Tech, Nasty I know but no other choice they got you.

No unfortunatly. That is done in the diagnostic mode on the 3535, and that is propritary sofware where the diagnostics has to be accessed with a laptop that has that software loaded onto it.
There are some resets you can do, but they wipe out all the NVM inforamtion. Once those numbers reach a certain level, they have to be reset via a laptop.
Now that being said, once it is accessed, the service rep CAN change that threshold to a much much higher number so you can run the parts to failure, which is more realistic.
Those parts are very easy to replace. And can be purchased from a business called The Parts Drop, Google that business and talk to Britt. No I do not work there, but have dealt with them for years and they are very professional and exceptionally honest.