Question about Blitzz Technology (BWA611) Router

1 Answer

Router W/o cd or manual how to get to work with pc.

I just received the Blitzz Netwave Base G4 Router from my brother inlaw w/o a cd or manual can someone help me?

Posted by on

  • derlim1975 Jun 02, 2009

    I AM TRYING THIS NOW THANK YOU

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.254. Then hit "ENTER".

You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are blank. Click the Ok button to log in to your router. That should get you in, but if you get kicked out, because of wrong username or password. On the back of the router should have reset switch or button in a small hole. Press and hold that for about a minute. Should reset to factory default. Sorry forgot to say that you will need to use a paper clip to fit into reset switch. The big paper clip is the best and it needs to be straighten a little.

Posted on Jun 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I secure my network with one main computer and two wireless devices? I have a Blitzz Netwave Base II On a dsl modem. Thanks


You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here for step by step instructions

Dec 09, 2009 | Blitzz Technology (BWA611) Router

1 Answer

I have a Netwave Base G4 wireless router w/ 4- port switch,trying to network two computers via cable modem using local ports,modem and router not communicating


You need to change the LAN IP address of your router. Open the router's admin through http://192.168.1.1 and look for router's IP address or Local IP Address. Change it to 192.168.10.1 and save the settings. Reboot the router after that. If you are on cable internet , you need to do MAC Cloning. Access the router's admin page and look for MAC Clone settings. Enable and clone the PC's Mac Address. Save the settings and power cycle the router and the modem after that.

Aug 02, 2009 | Blitzz Technology (BWA611) Router

1 Answer

Don't have manual or cd


This will show you how to get into the router. Even though these are the steps for port fowarding. You should still be able to set up your router with these instructions:

http://www.portforward.com/english/routers/port_forwarding/Blitzz/BWA611/eJamming_Station.htm

Jun 27, 2009 | Blitzz Technology (BWA611) Router

1 Answer

NetWave Base G4 router "goes to sleep"


well one thing if your router uses the same IP address as your hughes net then they will interfere with each other. hook your router to your pc and leave the hughes modem out of the equation then go to command prompt on your pc and type in ipconfig that will tell you what ip address your router is using that way you can get into the settings of the router and change whatever you need to change.....I would just set it back to default and make sure the ip address is not 192.168.0.1 because that is the dynamic ip for hughes

Apr 30, 2009 | Blitzz Technology (BWA611) Router

1 Answer

Need software


Hello, you will find your driver here:

http://members.driverguide.com/driver/detail.php?driverid=432573

But you have to register on the site (it's free)

Have a great day!
Pablo :-)

Oct 19, 2008 | Blitzz Technology (BWA611) Router

1 Answer

Can't hook up my router. i hook up the router but cant remember how to set it up to pick up the ip address' I have a Blitzz netwave base g4 wireless router. how do i connect to the internet?


open your internet explorer and type in 192.168.1.254
it should ask you for your password
the settings are in there.
set it up according to which internet service you have be it dsl cable etc.
there should be some instructions in that page when you get to the setup page.

Robert

Aug 28, 2008 | Computers & Internet

Not finding what you are looking for?
Blitzz Technology (BWA611) Router Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blitzz Technology Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

fred capra
fred capra

Level 2 Expert

85 Answers

Tre Elkins

Level 3 Expert

643 Answers

Are you a Blitzz Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...