Question about Hotpoint WMTL80 Top Load Washer
Where is the Pressure Chamber Switch located on a Hotpoint WMTL80 and how easy is it to access and fix
Chances are the wiring underneath to the transmission solinoid has broken. You'll have to drain the washer by laying the drain hose on the floor in a pan. Then turtle (flip on it's side) on a pad/carpet carefully and remove the back panel and trace the wires with a flashlight, If you find the break you can try a heavy duty **** splice but my experiences tell me adding wires to lengthing that cable is a better choice.
Posted on Jul 28, 2009
Should be located under the lid near the top edge, round shape with a tube going to the bottom of it and wires in the front. To remove from the frame turn the whole thing 90 degrees as fitted with with rectangular fitting on rear.
Posted on Jan 28, 2010
I would remove the dispenser drawer by pressing on the release button, then clean out under the drawer. The reason I say this is I have had a few do this and I found a rinse agent clogging unit it cause the water during rinse to dispense forward and leak on the floor. It not difficult to clean out, this can take up to 10 minutes or so to fix with no parts needed.
Posted on Aug 31, 2011
Tips for a great answer:
Dec 21, 2012 | Hotpoint Wmt05p Wmtl79 Wmtl80 Washing...
Oct 31, 2010 | Hotpoint Washing Machines
Sep 23, 2010 | Hotpoint Ultima WF865 Front Load Washer
Feb 17, 2010 | Hotpoint Ultima WD72 Front Load...
Jan 17, 2010 | Hotpoint Ultima WF860 Front Load Washer
Jul 28, 2009 | Hotpoint WMTL80 Top Load Washer
Apr 25, 2009 | Hotpoint Ultima WF860 Front Load Washer
Mar 26, 2009 | Washing Machines
Dec 22, 2008 | Hotpoint Aquarius WMA42 Front Load Washer
Feb 14, 2008 | Hotpoint Aquarius WMA42 Front Load Washer
26 people viewed this question
Usually answered in minutes!