Replacement slow cooker pot

SOURCE: WEST BEND SLOW COOKER

1. The thermostat may temporarily lose calibration due to temperature changes resulting in an E01 error message on the display. Repeat the following steps to reset the unit.
2. 1. Unplug the unit from the wall socket for approximately 10 seconds.


3. 2. Plug the unit back into the wall socket.


4. 3. Press the POWER button once. Within one second, press the COOK button once. The unit should now be rese

SOURCE: REplacing only West Bend Stoneware Crock

Go to the manufacturers website here (http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=2255&secid=54&linkon=category&linkid=69) and you can order replacement parts for this model.  Anything from the lid to the stoneware crock to the feet.

SOURCE: crock pot

I had the same problem this morning (E01 error message). I unplugged the crock pot and held the "cook" button while I plugged it in. It reset and all is working fine now.

SOURCE: Westbend 6 qt crock white round pot

Try the Westbend website or replacements.com. If those two fail, try eBay.



Please remember to rate my solutions! Thanks

SOURCE: Rival Crock Pot scratches

Sure, the scratches are in the glaze and will not affect the performance of the pot nor will it contaminate your food, just do an extra good job washing it.