Question about Washing Machines

1 Answer

My washing machine power circuit board has died twice

Second time in six months. Is this a problem with the machine or the power supply?

Should I buy a new machine or pay for another expensive repair?

Which? says that Zanussi is a reliable brand, but now I'm not so sure!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

The motor maybe going out gradualy or over loading the machine with ckoths for washing or too large articles.because of weight will over load the motor. Age of machine has some effects, but try the above first before buying another machine. Hope this be of some help

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Fisher Paykel IW812 washing machine ,we had. Power surge from lighting and thunder and the power went of twice, the machine when off twice in the middle of a spin. And know power does work


Your motor controller board is dead & needs replacing.
Cutting power while in spin mode is not a good
thing for the control board as it sends DC power to the motor.
The motor generates AC power and sends it back into the board
and destroys CPU everything on the board.
Cheaper to get a reconditioned motor controller board.
First six digits under the bar code is the part number for your board.


25343624-o21iqrern5bjh5lchb3pyo5o-2-0.jpg

Dec 29, 2014 | Fisher Washing Machines

1 Answer

No power - samsung model mfsui80ncc-t2


i have a samsung washing machine model wa91u3 no power supply. i check electronic board totally burn. board model mfsui80ncc-t2. please help me to buy sparepart. I need to change new electronic board.

Oct 09, 2012 | Washing Machines

1 Answer

My Samsung HdTv will not come back on. Only a small red light next to the power button is blinking. First it was blinking six times then five now six again. Model TXR3079 or 8WHKXXAA. Samsung hdtv...


Hello, You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, If you need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where. power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement. Hope this will help to solve the problem

Aug 27, 2011 | Samsung Televison & Video

2 Answers

My panasonic Th50pz85u will not turn on. I can hear a click and the red light next to the on-off switch flashes twice and continues this flashing twice sequence. When this first started a month ago I could...


U know basic electronic?Can u do basic soldering?U have tools like a soldering iron,desoldering pump or desoldering braids,solders?The power supply board have parts that call capacitors,it dying,that why is causing this problems.The power supply board,that the board,where the power a/c cord plug into it.These capacitors on power supply board it dying,will bulges up on it tops or puffing up on it tops.These dying capacitors are now dead,must be replaced to solved this flashing twice problems.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Oct 18, 2010 | Panasonic Viera TH-50PZ85U Plasma TV

1 Answer

When turning on the tv it chimes as it always has before powering up but it has been chimeing twice during startup. Then it started doing it three times and now it does it 4 times before turning on. This...


The tv power supply board have these parts call capacitors.It dying and have leakages of gases.That the board,where the power a/c cord plug into it.That the power supply board.These capacitors parts are alway bulges up on it tops or puff up on it tops,it dying.U know basic electronic and soldering?Replaced these dying to be dead capcitors,will cure ur delay of the tv power start up.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Jun 30, 2010 | Samsung LN-T4061F 40 in. LCD HDTV

1 Answer

This one powers up, and displays for a second, but shots off after about a second.


U still have Sound?Or the power just dies?Tries websites Ebay.com,Shojimmy.com to buy the 2 reburbish LCD inverter boards,it a long boards,to replaced if still have sound.Replaced the 2 long LCD inverter board will get ur picture back.If power dies than buy the power supply board for the replacement.The power supply board is the board where the power a/c cord plug into it.

Jun 09, 2010 | Protron PLTV-3750 Television

1 Answer

My d530 minitower powers off unexpectedly and red lights starts to blink on System's LED//


Hi Kindly let me know how many times the red light blinks
Condition Code Service Actions Processor thermal protection activated. Power LED blinks red twice, once a second, followed by a two second pause.
  1. Make sure the computer air vents are not blocked and that the cooling fan is running.
  2. Open the hood, press the power button, and see if the processor fan spins. If the fan is not spinning, make sure the fan cable is plugged into the cable header on the system board, and that the fan is properly installed and seated.
  3. If the fan is plugged in and seated properly, but is still not spinning, replace the processor fan.
  4. Reseat the processor heatsink and make sure the fan assembly is attached to the heatsink properly.
Processor is not installed. Power LED blinks red three times, once a second, followed by a two second pause.
NOTE: This condition indicates a missing or improperly installed processor, not a defective one.

Make sure there is a processor in the system. Reseat the processor and verify that it is installed properly. Power failure (power supply is overloaded) Power LED blinks red four times, once a second, followed by a two second pause.
  1. Check the voltage selector, located on the rear of the power supply, is set to the correct voltage (the correct setting depends on the region).
  2. Open the hood and make sure the 4-wire power supply cable is fully connected to the power connector on the system board.
  3. Check if a device is causing the problem by removing all attached devices (such as disk drives and expansion cards), then power on the system. If the system enters POST, power off and replace one device at a time, repeating the procedure until the system power failure reoccurs. Replace the device that caused the failure, then replace each of the other devices and confirm that they are functioning properly.
  4. If you cannot isolate the failure to a specific device in the previous step, replace the power supply. **
  5. Replace the system board.*
Pre-video memory error. Power LED blinks red five times, once a second, followed by a two second pause, and five simultaneous beeps are sounded
  1. Reseat the DIMMs in the memory slots on the system board, then power on the system.
  2. Replace the DIMMs one at a time to isolate the faulty module.
  3. Replace 3rd-party memory with HP memory.
  4. Replace the system board.*
Pre-video graphics error. Power LED blinks red six times, once every second, followed by a two second pause, and six simultaneous beeps are sounded. For systems with a graphic card:

  1. Reseat the graphics card and then power on the system.
  2. Replace the graphics card.
  3. Replace the system board.*


For systems with integrated (on-board) graphics, replace the system board. PCA (system board) failure. ROM detected failure prior to video. Power LED blinks red seven times, once a second, followed by a two second pause, and seven simultaneous beeps are sounded. Replace the system board. Invalid ROM based on bad checksum Power LED blinks red eight times, once a second, followed by a two second pause, and eight simultaneous beeps are sounded.
  1. Reflash the ROM using a ROMPaq diskette.
  2. Replace the system board.*
System does not power on. No beeps or blinks since the system is not functioning. Press and hold the power button for less than four seconds. Perform the following steps depending on whether the hard drive LED turns green.

If the hard drive LED turns green, then:

  1. Make sure the voltage selector (which is located on the back of the power supply) is set to the correct voltage for your region.
  2. Remove the expansion cards one at a time until the 3.3V auxiliary light on the system board turns on. If removing a card turns the light on, replace the card and then see if the system works.
  3. Replace the system board.*


If the hard drive LED does not turn green, then:

  1. Make sure the computer is plugged into a functioning AC power outlet.
  2. Open the hood and make sure the power button is securely fastened in the power harness and that the harness is connected properly to the power connector on the system board. In other words, make sure that the power button is making contact with the power circuit.
  3. Make sure the power supply cables are connected properly to the power connectors on the system board.
  4. Check to see if the 3.3V auxiliary light on the system board is not turned on, replace the power supply. **
  5. Replace the system board.*

Dec 29, 2009 | HP Compaq d530 Convertible Minitower PC...

1 Answer

Error Code F22


loose connection or mother board again

Jun 07, 2008 | Whirlpool Duet GHW9150P Front Load Washer

7 Answers

Tv shutting off


How many times per second does the POWER led blink? (dont worry about the OPC).

1x per second (constant, steady blink) = bad inverter/lamps
2x per second = bad power supply
3x per second = bad main board

You can buy the parts online and fix if yourself!!

Dec 02, 2007 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Brad Brown

Level 3 Expert

15633 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...