Question about Amana MVH220W Microwave Oven

1 Answer

How to get to stirrer on amana mvh220e microwave oven?

How to dissassemble mvh220e to get a cap to discharge it and how to get to stirrer to degrease it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Amana Master
  • 9,047 Answers

You don't have to do that kind of disassembly to get to the stirrer on this model.

The stirrer is located under the floor plate, which is probably ceramic and certainly fragile.

It's held in place with a rubber gasket, which you should be careful not to tear.

You can use a butter knife or putty knife to gently lift up the front of the floor plate, then it will slide forward & out.

Then you'll see the stirrer.

If the gasket is torn, it should be replaced or sealed with caulk after a thorough degreasing and cleaning.

You can find helpful exploded view diagrams and order parts by entering your full model number from the tag on the oven here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Jun 02, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to install a new microwave over the counter microwave that uses the existing mounting screws, vents, template and whatever. I don't want to have to do anything but disconnect and remove the old

you must ask to the supplier for the dimension and based in the models specifications. Contact them via ONLINE chat and get the support for better performance.
God bless you

Nov 18, 2013 | Microwave Ovens

1 Answer

On my amana rfs8b the stirrer or bracket cought on fire , whould the stirrer being stuck cause this?

Yes! it is more than likely that what happened [ motor overheated because it was seized] my main concern is the magnetron, if it ran for all that time without food, it has more than likely sustained damage.

May 22, 2012 | Amana Microwave Ovens

1 Answer

Mod mvh220e/o1mic will count down but mag will not kick in

Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips


Sep 15, 2010 | Amana Microwave Ovens

1 Answer

We have an old microwave that we took off our wall and want to install in another house but don't remember house to hook it on plate attached to wall

To allow us to help you effectively (at no charge), please post a NEW problem to FixYa, and please include your brand name and the full model number from the tag in or on the unit, and mention that you want the installation instructions.

Nov 24, 2009 | Amana MVH220E Microwave Oven

1 Answer

How to remove an old amana microwave from the wall model MVH-9T

remove grease traps on underside. Look inside and remove
clip(s) to wall
Open cabinet above, remove two bolts holding microwave
Slide out.

Apr 27, 2009 | Amana MVH220E Microwave Oven

2 Answers

Amana RFS12SW2 microwave. Mag is overheating; the TCO is working properly and shuts the oven off at 325 degrees F. I replaced it for good measure and it made no difference. It takes on average 2...

I contacted Amana tech support. They stated to check that the stirrer was revolving and to make sure I had the cover back on the microwave. Once the cover was put back on and the grease shield was in place, the stirrer did revolve and the magnetron no longer overheated.

Aug 29, 2008 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers


Level 3 Expert

102366 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you an Amana Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides