Question about Maytag Ovens

1 Answer

Maytag oven reads fi

Maytag oven will not stay on bake it returns to fi

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Defective touch pad or clock (ERC)

This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag double electric oven. we turn on to bake and would switch to broil then will turn off.


Assuming this is on a gas range, the bake burner ( under the oven floor) and the broil burner ( at the top of the oven) have electric igniters . When switching from bake to broil the broiler goes off due to a defective or broken broil igniter. cheap part to replace ( +-$40.00)

Oct 16, 2014 | Maytag Ovens

2 Answers

Turn oven on to 350. It clicks and goes to 100. Stays at 100 and never heats up.


Assuming a digital oven with a thermometer: The 100 degree reading is probably the lowest reading the thermometer will register.
Don't give me a poor rating because I said your question was poor. Include as much information as possible including basic description of appliance and model number. Try different things and state what works as well as what does not work.
In this way, you can get better answers. As is, I know nothing about your oven except that it does not work. My keyboard will not fix your oven. It would be helpful if you convince me that you are not afraid to physically enter your oven and touch things.
:o)

Jun 03, 2011 | Maytag Ovens

1 Answer

My mom has a 2003 maytag precision top control 500 electric smoothtop oven. problem- uneven heating and also seems to need to bake on a higher heat than recommended.


Hello & Welcome to FixYa

This indicates a open/shorted oven temperature sensor and to solve this problem the sensor needs replacement. If you wan to be sure before replacing the sensor then you can test it with a voltmeter for around 1100ohms....if it reads more then this then it needs replacement however, if the reading is around or less then 1100ohms then it is the control board that needs replacement. Please get back to me if you have any other questions.


Kevin

Feb 03, 2011 | Maytag MEW5527D Electric Single Oven

1 Answer

I have a maytag pilotless ignition gas oven. the top burners work fine the broiler ignites fine. we just tried clean mode and its working too. the problem is we cannot get the oven to heat up. we turn bake...


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

Oct 13, 2010 | Maytag Ovens

1 Answer

Bake button does not work.


if the buttons are the touch pads then your control has failed and you will have to replace it .mm

Jul 14, 2010 | Maytag 30 in. Electric Single Wall Oven...

1 Answer

Oven stays on


The oven won't come at all.

Jun 05, 2010 | Maytag Ovens

1 Answer

My Maytag Performa oven and stove top will not turn on (heat up)


When I turn on my Maytag performa using the "bake" function, everything looks ok on the display, however the temp. never rises above 100. I've tried "bake" and "convect", and neither one work. "Clean" doesn't work either. The oven will lock, and display shows that it's heating up, but temp. never rises.
However....."broil" feature works just fine.
Please help.

Mar 09, 2010 | Maytag 30" Built-In Single Electric Wall...

1 Answer

The bake on my oven does not heat up ? what's the problem


Hi and welcome to FixYa.com!

First thing to check is the bake element. Examine it for signs of blisters or cracks. If you have a VOM, check it for continuity. It is likely that your problem is just a open bake element. Very common problem.

Hope this helps you and Happy New Year from the FixYa crew!

Dec 27, 2008 | Maytag 30" Built-In Single Electric Wall...

3 Answers

Maytag oven will not light


Have you tried to broil or bake? if only one of them work you have a bad ignitor. let me know and we can go deeper

Aug 23, 2007 | Maytag CWG3100A Gas Single Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Mack Baxter

Level 3 Expert

381 Answers

Are you a Maytag Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...