Question about GE Wireless Optical Mouse

2 Answers

Mouse stopped working..changed the batteries..was working, now it

Isn't working again. I pushed the link button. Help! I had it a week - worked fine. I then unhooked it to try one a different computer and now that I hooked back up to original it will not work. Light is on but it will not move at all.

Posted by on

  • 5 more comments 
  • mimikaty1 Jun 01, 2009

    I don't quite know what you mean by a docking station.

  • mimikaty1 Jun 01, 2009

    No i do not. I have in plugged in to usb port

  • mimikaty1 Jun 01, 2009

    the mouse reciever

  • mimikaty1 Jun 01, 2009

    Did all that. still wont work.

  • Lee Hodgson
    Lee Hodgson May 11, 2010

    Your problem header states that the mouse is "wireless" can you tell me what is plugged in to the USB port?


  • Lee Hodgson
    Lee Hodgson May 11, 2010

    A little bay that the mouse sits in while your not using it or to charge it

  • Lee Hodgson
    Lee Hodgson May 11, 2010

    Does the mouse have a docking station?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,806 Answers

There should be a connect button on the receiver either on the top or underneath, if there is press that button.
Then go to the mouse and press the connect button on that and just left or right click to activate it.
Let me know how you get on or if you need any more help.

Good luck

Posted on Jun 01, 2009

  • Lee Hodgson
    Lee Hodgson Jun 01, 2009

    Plug the receiver into another USB port, install the drivers (if you have to) and try again.
    Also check to make sure the batteries are in properly and that the are the right way round.


×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Does your mouse have a on/off switch? if so then turn it off then turn it back on. if that still does not work try the connection process all over again. link first the keyboard then the mouse.

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It stopped working, the keyboard is working fine. Replaced the batteries still not working?


When you change batteries you also need to reset your mouse and the receiver.

Back on your mouse is a little connect push-button to reset your mouse.

Eventually also push the black button on the top of the receiver.

This will hopefully help.

Regards

Sep 07, 2011 | Microsoft Wireless Laser Mouse 5000

1 Answer

My wireless mouse stopped working; I changed the batteries and still no light. Can you suggest a solution? I tried the connect button but no change. Thanks for any help!


usually there is a button on the bottom of the wireless mouse that you can push at the same time you push the button on the mouse adapter on the pc. Simulataneously push both and see if that doesn't help.

If that doesn't work, change batteries. If that doesn't work, uninstall the mouse and reboot. Software should reinstall.

Jul 06, 2010 | Logitech Cordless Mouse

1 Answer

Mouse stopped working


First make sure the batteries are good then folow these instructions.

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Oct 09, 2009 | Microsoft Wireless Laser Mouse 5000

1 Answer

Microsoft Laser Mouse 5000 stopped working altogether


Make sure the batteries are good and then follow these instructions.

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Sep 11, 2009 | Microsoft Wireless Laser Mouse 5000

1 Answer

Mouse stopped working..changed the batteries..was working, now it


on your computer screen at the bottom right corner, there should be a bluetooth icon (if your mouse is a bluetooth mouse) right click the bluetooth icon select ADD a device. after that follow the prompts, at some point it will ask you to have the bluetooth device be discoverable, which means you have to press the bluetooth sync button at the bottom of the mouse, if it blinks then you can proceed connecting or syncing the device. hit me back with the results.

Jan 29, 2009 | GE Wireless Optical Mouse

1 Answer

Where is the link button?


make sure the batteries are in correct
PUSH LINK ON TRANSMITTER
then on the bottom of the mouse there will be a button IF NOT on the USB THERE IS A BUTTON PUSH THAT
if mouse still does'nt work restart then again follow instructions above
Let me know if that was helpful

Jan 24, 2009 | GE Wireless Optical Mini Mouse 3087897985

2 Answers

Interlink 4350 wireless mouse won't work


You probably already tried this.
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

Dec 03, 2008 | Interlink VP4350 Mouse

2 Answers

Mouse stopped working, but appears ok, batteries ok, can't determine problem


Is the batteries good. If so try,

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Jun 08, 2008 | Logitech Wheel Mouse Optical

1 Answer

Microsoft Wireless Optical Comfort Desktop and Mouse combo Freezing Prob.'s


have you tried pressing the connect button on the reciever then on the mouse so it picks it back up again?

May 01, 2008 | Microsoft Multimedia Optical...

Not finding what you are looking for?
GE Wireless Optical Mouse Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Computers & Internet Experts

micky dee

Level 3 Expert

2776 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

brian soufane

Level 3 Expert

693 Answers

Are you a GE Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...