PJD6221 3D DPL MANUAL SERVICE - ViewSonic PJD6221 3D DLP Projector

http://www.wescomfg.com/html/contact_us.htm
Wesco Industrial Products, Inc.
1250 Welsh Rd
North Wales, PA 19454
P. 215-699-7031
F. 1-800-346-5511

The RDV2020 is programmable to many different PL and/or DPL codes. Here is a link to the manual: http://www.twowayradiosfor.com/pdf/RDX-Non-Display-manual.pdf

You can read about reprogramming codes pages 36-44. Or simply reading out the code on page 40.

Best regards.

you did not gave us the router version
so look here for your password http://www.phenoelit-us.org/dpl/dpl.html
scroll down to D_LINK and look for your version and your use and password.

If that didn't work, that means that someone has already changed the password.

Go to the router and reset it and the default password should be here
http://www.phenoelit-us.org/dpl/dpl.html

Could have helped more if the router model was mentioned.

Please rate 4 stars if this helped you. Thank you

You can get the service manual on link below.

http://tanakapowerequipment.com/pdf/serv/Tanaka_HT_Service_Manual.pdf

On this link below is the parts list.

http://www.tanaka-usa.com/pdf/dpl/hedge_trimmers/THT-2100dpl.pdf

Good Luck and please rate 4 thumbs up for the free answer.

Dear Friend,
If you don't have change your password from factory defaults then look into manual for user name and password...
If you have change your password then, Sorry you have to reset your router. this will delete all your configuration but will set your login id and password to factory defaults... ( there is no other way)
Please rate the answer

Hi Vince,

Have you tried to set the PL or DPL on the radio. This will not stop the interference but it will prevent your radio from un squelching while riding.
If you could post the make and model of the radio i will look for a owners manual for you.

Remember to set both radios the same or make the PL or DPL the same or the radios will not "talk" to each other. PL and DPL stand for Private Line and Digital Private Line both terms coined by Motorola. It is a sub-auditable tone that the radio will listen for and open the squelch when the corrosponding radio is transmitting the tone and vice-versa.
Hope this helped.

Here is a link to download the user manual for the GP68 http://safemanuals.com/user-guide-instructions-owner-manual/MOTOROLA/GP68%20RADIO%20TRANSMITTER-_E

On your first radio, the one we've been discussing, I believe you have the DPL code set incorrectly. Your radio will go up to the number 126, but this is not the DPL code's number. It is simply a numbering system.

If I read the chart correctly:
DPL 205 equals the number 072.
DPL 023 equals the number 043.

Disclaimer: This numbering system listed in the user guide does not follow any common numbering system. I have other TPL/DPL charts which differ. The above reference is only based on what I have read in the user guide.

I am confident if your radio worked previously at another job site, using other frequencies/PL codes, that your only issue at this time is programming.

As for your unlock issue on the other GP68. Your radio may be in need of repair. The internal button is possibly wornout or has been depressed too far, and is bent on the board beyond the point of functioning.

You may have one of them set to the wrong DPL code. Most FRS radios have a channel number and another number that corresponds to a DPL code. Try looking in your owners manual for this feature it may be known under a different description as each company calls it different things. DPL, PL, private code, user code etc.

Router passwords are not normally set by the manufacturer. So if you bought it new then it should tell you in the instruction manual that came with it. If you bought it secondhand/used the you will have to ask the people you bought it from.
This may help depending on the make and model.
http://www.phenoelit-us.org/dpl/dpl.html