Question about RCA F27669 TV

1 Answer

Antenna? How do i switch from cable to antenna option.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 173 Answers
Re: antenna?










dont forget to tell me u r problem solved or not

best regards & best of luck.

Posted on Oct 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to program with cable using remote


1 Find and disconnect the cable that is connected to the

ANT IN terminal on your cable box.

? This terminal might be labeled "ANT IN", "VHF IN" or

simply, "IN".

2 Connect this cable to a two-way splitter.

3 Connect an Antenna cable between an OUT terminal on

the splitter and the IN terminal on the cable box.

4 Connect an Antenna cable between the ANT OUT terminal

on the cable box and the B-IN terminal on the RF(A/B)

5 Connect another cable between the other OUT terminal on

the splitter and the A-IN terminal on the RF (A/B) switch.

6 Connect the last Antenna cable between the OUT terminal

on the RF (A/B) switch and the ANT IN (AIR/CABLE)

terminal on the back of the TV.

After you have made this connection, set the A/B switch to the

"A" position for normal viewing. Set the A/B switch to the "B"

position to view scrambled channels. (When you set the A/B

switch to "B", you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)

Jan 01, 2011 | Samsung SlimFit TX-T2782 HDTV

1 Answer

How do I switch the input from cable to antenna?

Go into your menu and find setup.It will give you an option to go to ant. or cable.

Sep 25, 2010 | Emerson EWF2004 20" TV

1 Answer

Magnavox tv has cable channels 2-13 only. Lost original remote. Using a universal remote. Tried to auto program. It started scanning but when channel 14 came around, just fuzzy snowy picture all through...

The set needs to be switched from antenna to cable in the setup menu. It is capable of either antenna reception or cable reception. Ch 2-14 are the same frequency for antenna and cable but above 14 they are different. That is why the picture is stoping at 14. After you switch it to cable auto program again. Thanks for using fixya.

Nov 12, 2009 | Standard (CRT) Televisions

1 Answer

Can't change TV to CATV mode

You must unplug the cable connecting the television and the cable box. Then turn the television off and then back on. Do not turn the cable box off or disconnect the cable in wire from the cable box especially if you use Cable Vision. It will take up to 20 minutes before the box comes back on. Now turn the television back on. When you access the Channel System menu, you have the access to the submenu choices. Change the Antenna option to CATV and the Current Channel to 3. Reconnect the cable box to the TV.

Also those that are having problems with the TV turning off periodically, make sure the sleep mode option does not have a number in it. For example, if the number is 10, it will turn off every 10 minutes.

Sep 05, 2009 | Memorex MT2206 TV

1 Answer

Don't know how to change from cable to antenna

on the back of your set
there may be a small switch someone with 2 or 3 different options

Jan 20, 2009 | Sony KV-24FV12 24" TV

1 Answer

Channel settings

Most TV's have an option in the menu for antenna/air and cable. I t may also be labeled digital and analog as well. You need to ensure that you have this set to the signal you are trying to receive. Some TV's have two coaxial connections at the back usually labeled antenna A and antenna B or air and cable. If your's has this option you will need to be on the correct input for the signal you want to receive. I hope this is of assistance to you and thanks for using Fix Ya.

Oct 21, 2008 | RCA F32650 32" TV

1 Answer

Switching from cable to an antenna

well first off, on 2-9-09 the off air antenna will be eliminated. and you must have a converter box to receive signal. Now on the set that you have, you must check and see if its a dual tuner. NTSC or ATSC and still try to run the auto search on cable and see how many channels you get. Most Tvs only have cable setting and not off air. so try it and see.

Mar 31, 2008 | JVC AV-27D302 27" TV

2 Answers

How to change from video mode to cable/Antenna Input without a Remote

Alot of Zeniths have menu for that, have you tried to press the channel up button?

May 15, 2007 | Zenith A25A11D 25" TV

1 Answer

Mitsubishi vs-45609

You should have two antenna inputs A & B. Most commonly the RF or TV output on the back of the cable box is connected to antenna A and the TV has to be set for channel 3 or 4 depending on which station is not available in your area. If you don't get a picture on 3 or 4 then switch the cable box to antenna B or find the switch on the remote that allows you to remotly switch antenna inputs. If your TV has a connection that says "cable out" don't use that one as that is for a more complex setup. I hope this helps you.

May 02, 2007 | Mitsubishi VS-45609 TV

1 Answer

Tv won't get channels

We have the owners manual in case you misplaced yours . All ya gotta doi to get it is to click on the zenith B32A34Z model # At the top of this page and scroll down to the manual. Now according to the manual in the menu there is an antenns /cable setting and its in the EZ progrom mode. look at the manual as I dont remeber 100% but its there. It sounds like you or someone switched it when they were in the menu. Good Luck

May 11, 2006 | Zenith B32A34Z 32" TV

Not finding what you are looking for?
RCA F27669 TV Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides