Question about Hitachi 57F500 57" Rear Projection HDTV-Ready Television

1 Answer

Power off presents magic focus screen, tv must be unplugged.

Recently warner cable reprogrammed their hd-tuner to improve reception and now my tv will not power down. the power on button will bring up the magic-focus routine everytime you press the power-off button whether on the tv or the remote; in order to power off the tv, i have to unplug it from the wall.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

You will have to determine if tv fault or cable fault, shut down cable box and unplug it`s power cable. Once all power is removed from cable co. equipment retry your tv controls, if tv turns on correctly problem with cable co, if not tv has corrupted data (try unplugging tv for 1 minute and then retry) ifstill bad tv has bad control board or logic problem, either one will require tv tech to fix, hope this helps, video-tek

Posted on Jun 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No HD on tv


no it does not, you have regular channels via a box and what is the connection on the set for the HD channels? If from same box do not overlook that the set and box were likely unplugged.

reboot the set and the box both by unplugging for a while and if still no HD reprogram the TV channels which in some modes takes a bit of time--no relation between power board and HD reception.

Jun 02, 2012 | Televison & Video

1 Answer

Sound Issues on a Mitsubishi big screen...


There could be a problem on your cable TV signal, try to re-program the channel again to get the clear reception for viewing, if your unable to do so, you may call your cable network provider to assist you make the channeling of your TV.

It's also thier duty to serve you bc you got bad receptions signal.

Mar 01, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

2 Answers

Mitsubishi WD 52525 - Blue Screen RBGHV or YPrPb


Try unplugging the TV set from the wall for at least an hour or so.

Aug 23, 2007 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

My viore 32"lcd hd modle lc32vx60hdt will power up


The tv Tuner signal board is dead,that the board where the incomming broadcasting signal cable plug in it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish tv Tuner signal board for the replacement.

Jan 13, 2011 | Televison & Video

1 Answer

Olevia 242 and Motorola DVR Cable Box switching


Have you tried using component cables instead. One of my Time Warner cable boxes did the same thing using HDMI.

Dec 01, 2009 | Televison & Video

1 Answer

Do i need time warner converter to recieve hdtvor is tv tuner capable of hdtv


The answer is not as easy as you might think.
1. Since you poted this as a Generic tv, i don't know if you have a digital tuner, check you owners manual and see if a digital tuner is included in your set.

2. You need to contact time warner cable and see if they are broadcasing your local chanels in hd, Here where we are in ohio they are but i cannot speak for the time warner cable where you are at.

If you need a more specific answer reply with model and where you live.

Sep 03, 2009 | Vizio Televison & Video

1 Answer

Initial hdmi tv, no signal received


If you are trying to get 'off the air' signals then you must scan for the new digital channels in your reception area (this info should be in your owners manual). If scanning doesn't find any signals, you might have to add a VHF/UHF line amplifier(s) between your antenna and the TV set or improve your outside antenna or the cable leading from it to your set. You might have to resort to subscribing to HD cable or satellite TV.

Jun 22, 2009 | Initial Televison & Video

1 Answer

No TV Reception


Sony Technician confirmed that that the TV has an analog tuner
2 options - outdoor antenna with digital converter --- or cable service

Jan 16, 2009 | Sony KP-53V75 53" Rear Projection...

1 Answer

P50 VIZIO WHEN ON HDTV I GET SNOW


it's probably the Time Warner cable box that have issue and not the TV. Try using a DVD player and test the same input, it should work fine.

Nov 15, 2008 | Vizio P50HDTV10A 50 in. Plasma HDTV

2 Answers

HDMI connectivity


what does the error message say?

Dec 01, 2007 | Televison & Video

Not finding what you are looking for?
Hitachi 57F500 57" Rear Projection HDTV-Ready Television Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...