Question about Abit IP35P Motherboard

1 Answer

No CPU to AGP controller.

My display driver has some error because when I play WoW it causes the computer to freeze and go black, requiring a restart. (Used to be the blue screen of death sporting a message of Device driver stuck in infinite loop. File: ATI2DVAG, but now just freezes and goes black.)After many hours of desperate troubleshooting, I found a very common solution to go into the device manager and change the CPU to AGP controller to the PCI Bridge, but to my dismay, my computer (Which had its hard drive wiped without the manufacturer disks to reinstall) doesnt even have the CPG to AGP controller. I have no idea where to find this device. My computer recognizes the drivers for my ATI graphics card, but doesnt have this one section.

Posted by on

  • sunrisestomp Jun 01, 2009

    Ive tried updating the drivers and the computer isnt overheating. So, neither of those are the cause of why the driver isnt in the device manager.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Is that your motherboard on you picture? if so, it has an expansion slot built for pci-e video cards, then problem solved!! if not, try updating your drivers!! then place a fan on you northbridge chipset so that it wont heat-up... that's the thing... pm me..

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Deleted via cpu to agp controller


You can actually do a system restore to retrieve it. Go to start > programs > accessories > system tools > system restore

select the date when it was still there.

Dec 17, 2012 | Acer VIA CPU to AGP Controller

1 Answer

My computer turns off and on again for a few seconds. (this time it will bootup) when i pressed the power button. i already change the ram to 1gb but the problem still occurs. What can i do to fix this...


It may be owe to software problem 1, the virus "shock" virus attack will prompt system will automatically start in few seconds. From the remote control you Trojan program all the activities of the computer, including let your computer restarts. Remove viruses, trojans, or reshipment system. 2, the system files damage system files destroyed, as the KERNEL32. Win2K DLL Win98 features, the font list below such basic execution system files destroyed at startup, system will therefore cannot finish initializing and forced the restart. Solution: cover installation or reinstall it. Hardware problem: 1.Chassis power is not enough, dc output is pure, the dynamic response sluggish. Users often ignored or assembling businessman, using cheap price of power supply, so is the largest system of automatic restart suspicion. (1) the power output power shortage, when run large 3D gaming occupy CPU resource of software, the CPU needs power supply, power is not caused by overload protection, stop the power output. After the output power to stop, load, reduce power restart. Due to the protection of the recovery/time is short, so we are hosting automatic restart. (2) power dc output is pure, pure dc power supply of digital circuit requirements, when the power output of too direct, the harmonic content will result in digital circuits, performance is often work to crash or restart. (3) working load of the CPU is dynamic, on the current requirement is dynamic, and the dynamic response speed quickly. Request Some of the poor quality power dynamic response for a long time, could also lead to crash or frequent restart. (4) high-end graphics update equipment (large disk/video card/equipment (increased), after the hard disk) / burners, power supply of original beyond rated output power will cause the regular crash or restart. Solution: now in high quality high-power computer power. 2.The memory chip thermal stability, incorrect or damage to restart the system memory problems to restart the system of risk. (1) the poor thermal stability of memory, boot can work normally, when the memory to a certain temperature, temperature is can not work normally, which leads to crash or restart. (2) memory chips, slightly damaged, also can pass on self into the system, when the operation can be some big software throughput will restart or crash. Solution: replace memory. (3) memory of CAS value too small can also lead to instability caused by system memory, automatic restart. General had better use the default Settings, don't roll change yourself. 4.The CPU temperature exorbitant or the cache damage (1) the CPU temperature exorbitant often causes protective automatic restart. The basic reason of high temperature is due to poor cooling chassis, CPU, the CPU is undesirable reasons: the heat radiator thermal conductivity low, radiator material with a foreign body between CPU interface (1) for quality assurance, fan speed is low, the fan and radiator dust too much, etc. And P2, P3 motherboard CPU temperature probe damaged under the mp4 or within the CPU temperature detection circuit on the mainboard damage, the BIOS BUG in a special conditions of temperature, the CPU CMOS setup to protect low temperature, etc. Can also cause protective restart. (2) of an internal CPU, level 2 cache damage is CPU common fault. The extent of damage, or can start, when running into the system, the software (some throughput big media player, games, 3D graphic) will restart or crash. Solution: in the CMOS setup of shield (L2) or level 2 cache cache (L1), 1 or replace the CPU. 4.AGP display, PCI CARDS (nics), cat restart automatically (1) the external card or poor quality work not standard, AGP/PCI bus signal misoperation cause system RESET to restart. (2) and graphics, loose network system may cause restart. 5.Parallel, USB access is serial, fault or the incompatibility of external devices restart automatically (1) the fault or not compatible with the parallel damage, such as printer, a foot of short-circuit, USB equipment damage of short circuit, signal level sutural definition, opaque, etc. (2) hot swaps external devices, shaking, cause signals or power instant short-circuit. 6.Mainboard failure In case of automatic restart motherboard is rare. Generally RESET circuit are associated with a fault, Socket weld is empty, slots, contact undesirable, Individual chip, capacitance elements such as damage.

Jun 23, 2010 | Acer Aspire 4315 Notebook

1 Answer

Movie plays but screen is black


insert external AGP card in the cpu because internal display card does not suppot to picture or movie the other problems will also automatically solved

Feb 28, 2010 | Pioneer AVH-P4000DVD Monitor

2 Answers

Well, i was playing World of Warcraft today, and randomly everything started lagging pretty hard, so i restarted my cpu, and now i can't even been on for 5 minutes without the computer freezing up...


if you keep reset on to your CPU this will affect to your Hard Drive. When your online games WOW very lag then do not let that online game on play to your Computer. You know or maybe your Computer are not enough to run this game. Check all the plug in play device which are capable to run this game. Your VGA Compatibility e.i AGP or PCI-E, Memory speed e.i DD1, DD2 & DDR3 and mostly Games Accelerator Programs.
Hope this tip might help you.
Good luck!

Sep 30, 2009 | HP Compaq Presario SR2020NX PC Desktop

1 Answer

When i try to play the game i get fatal error msg


Devil May Cry 4

Minimum System Requirements
OS: Windows XP/Vista
  • Processor: Pentium 4 @ 3 GHz
Memory: 512 MB (1 GB for Vista)
Hard Drive: 8 GB Free
  • Video Memory: 256 MB (nVidia GeForce 6600 SM3 Required)
Sound Card: DirectX Compatible
DirectX: 9.0c
Keyboard & Mouse
DVD Rom Drive
Recommended System Requirements
OS: Windows XP/Vista
Processor: Intel Core 2 DUO
Memory: 1 GB (2 GB for Vista)
Hard Drive: 8 GB Free
Video Memory: 512 MB (nVidia GeForce 8600)
Sound Card: DirectX Compatible
DirectX: 9.0c or 10
Keyboard & Mouse
DVD Rom Drive

Seems like your graphic card is not supported. Its a older version. My first solution would be update your driver for your graphics card: http://driver.wareseeker.com/download/visiontek-radeon-9250-agp-8.072.rar/1e97d07a01 or http://www.soft32.com/Download/Free/VISIONTEK_RADEON_9250_AGP/4-172246-1.html

If that doesn't fix it (which I don't think it will), you might just have to buy yourself a better graphics card and/or computer.

May 30, 2009 | Capcom Devil May Cry 4

1 Answer

My computer comes up with a black screen


try and start in safe mode
then see if your driver is correct in my computer property hardware devices

Jan 17, 2009 | ATI RADEON HD 2400 PRO Graphic Card

1 Answer

Monitor screen freeze with driver...


hi! you don't need to update the driver cause the problem is in your hardware. Graphic seems to be a bit grounded, try cleaning the contact pins of your AGP graphic card with eraser, clean it side by side and then put it back again to an AGP slot, then boot your CPU again. If it still the same, try it in another motherboard that support you graphic card just to be sure before we conclude that its the graphic card has the problem. Anyway if it still under warranty you can claim for a replacement to the store where you bought the graphic card.  Have a nice day! 

Dec 28, 2008 | ATI RADEON X1650 Graphic Card

1 Answer

Vga card installation


you have to check: if driver is right and no error during hardware and software install
1) go bios check the setting for AGP and biuld-in VGA, set to AGP slot enable
2) check your cpu speed, and power supply watt, it is under 350 is not siuitable for higher speed cpu plus GF6600, choose 400W or higher better. sometimes the power trouble is crucial
3) check your motherboard model to make sure the AGP slot which support GF6600
3) go windows check 6600 device status at control panel/ system/hardware manage/vedio card show right detail.

Dec 26, 2008 | Intel D102GGC2 Motherboard

1 Answer

Screen going blank for a second or two while video freezes then jumps.


If you have on board graphics try removing video card and reboot when computer rebooted turn it of and refit card and restart when restarted computer should recognize new hard ware and should find the already installed drivers if not try installing drivers again
Sometimes windows does not recognize new hardware until its refitted
had this problem with modems alot and the above method solved it

Jul 31, 2008 | ATI RADEON X1650 Graphic Card

20 Answers

Ati2mtag causing crash - ATI vid card


Give this a shot - solves the problem for sure:
Right click-mouse over My Computer
Properties
Hardware(Tab)
Device Manager(button)
Click [+] next to System devices
right-mouse on CPU to AGP Controller (or whatever your controller is called, mine was SiS AGP)
Update Driver(button)
Select Install from a list or specific location (Advanced)
Next(button)
Select Don't search. I will choose the driver to install.
Next(button)
Select PCI standard PCI-to-PCI bridge
Next(button)
Finish(button)
Reboot.

Sep 21, 2007 | ATI RADEON 9550 Graphic Card

Not finding what you are looking for?
Abit IP35P Motherboard Logo

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Abit Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

David
David

Level 3 Expert

778 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you an Abit Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...