Question about Konica Minolta Office Equipment & Supplies

1 Answer

Error code P27

Konica 2223 error code P27

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,161 Answers

Description
P26 or P27 at power up or during copier operation.
Solution
PROBABLE CAUSES:
1. Open connection from the TDS sensor to the main CB or lack of developer. The TDS output is abnormal (0.2V DC or lower).
Verify that the sensor output is above 0.2V DC by monitoring CN6-A9 on the main CB while running the main motor in diagnostics (47 mode, output code 40).
Repair any poor connections to the TDS sensor and supply developer if necessary.
2. Code occurs after resetting the PM counter and P26 occurs if machine is powered OFF/ON, because the L-detect (TDS) adjustment was not performed

Posted on Jul 31, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
goodgold
  • 389 Answers

SOURCE: have code p27 for a konica 2223 and need to know

P27Toner density sensor unplugged or toner density sensor problem.

Posted on Jan 16, 2010

  • 1 Answer

SOURCE: how do i fix a p27 code on a konica 2223

Check toner density connector/replace toner density sensor

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toner Level Sensor konica 2223


what about the toner level sensor for the Konica 2223????

Jun 25, 2014 | Konica Minolta Minolta 2223 Laser Printer...

1 Answer

Konica 1120 display p27


Developing unit problem, check the developer(black powder) if enough or sometimes is old full of paper dust. After replacement of developer perform calibration TDS . If p27 still appear replaced developing sensor( under it).

Feb 18, 2013 | Konica 1120

1 Answer

HOW TO RECTIFY THE error code F-88 in konica 2223 copier


check your wiring on your board and maybe its a lost contact, or try to replace a new board

Mar 16, 2010 | Office Equipment & Supplies

2 Answers

How do i fix a p27 code on a konica 2223


Check toner density connector/replace toner density sensor

Jan 19, 2010 | Office Equipment & Supplies

1 Answer

Have code p27 for a konica 2223 and need to know how to hix this.


P27Toner density sensor unplugged or toner density sensor problem.

Jan 15, 2010 | Office Equipment & Supplies

1 Answer

Affter adding developer to my konica 2223, How do I reset the machine. (to clear ''routine service req'' on the display.


turn the machine off hold down 4 and 7 key turn on enter 9 0 then the date power off then on while holding 47 again and press 5 1 and start if you dont run the 5 1 you will get an error code and not be able to use the machine

Sep 29, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Error code p27


this is a toner density failure code if the service company replaced the developer and did not run the density adjustment it will through this code or it could be an older firmware version you need at least level 16 or it could be a bad toner sensor i would recomend having them come back out to fix it

Apr 05, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

P27 error keeps coming up on a Konica 1212


Run 47 mode output code 51 until the unit does not reoccour may take 5 to 10 attemp,
b. poor conection at cn95, reconnect cn95 located under the front of developer

Jan 02, 2009 | Office Equipment & Supplies

1 Answer

I have a Konica 2223 copier - wont print on edges


check all edge settings .f28 is code for charger corona just clean corona assembly with cerosene oil and change corona wire with new one.

Dec 16, 2008 | Office Equipment & Supplies

2 Answers

Error code 27


The error code p27 the toner density sensor unplugged/dirty/faulty
Any problems please get back to me
thank you

Feb 19, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...