Question about Kenmore 4.5 cu. ft. Oasis Canyon Top Load Washer

1 Answer

LOUD RATTLING NOISES ON SPIN CYCLE (SOUNDS LIKE MONEY OR MARBLES IN MACHINE)

My Kemnore Oasis Canyon Capacity washer (purchased in 2007) works great except now on the spin cycle, it rattles like there is money or a bunch of marbles in the machine, which there isn't. Since the machine does not have the agitator in the middle, I am assuming that whatever is rattling is something that fell beside the washer drum, not in it. What can I do.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

You'll need to investigate further. It may even mean bringing in a professional to be sure the vibration damper rods are ok - to prevent future and costlier problems.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore elite total care flex king size capacity plus quiet pak2 oasis that makes loud noises like a airplane when its in the spin cycle Model #110.28032701 which parts should be change?


If the washer is roaring during spin, the bearings are bad and you will need to replace the outer tub assembly.
Here is the part to order.

The part comes with a 365 day, any part, any reason return.

Nov 03, 2012 | Kenmore Washing Machines

1 Answer

Excessive noise during the spin cycle. we have owned the washer for 16 months. problem started 1 wk. the machine is level.


It's noisy Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 03, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Water leaking and loud noise and rattling on final spin cycle


Turn the drum by hand and if you hear any noises it is the rear bearing. If there is no noise then remove the front bottom panel and take out the coin trap on the pump and check those hoses.
Eric

Aug 27, 2009 | Whirlpool GHW9150 Front Load Washer

1 Answer

Very loud spin cycle


your bearings i the tub have gone bad. It happens usually if you use powder soap. It doesnt dissolve all the way and gets into the bearings and ruins them. Sorry but this is a pretty expensive fix. When you get it fixed used liquid soap and it shouldnt happen again.

Nov 14, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Rattling noise during spin cycle


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Nov 12, 2008 | Maytag MAH2400A Front Load Washer

1 Answer

Washer making a weird noise


I didn't get to answer this but It makes "cents" to me.

Sep 09, 2008 | Kenmore Oasis HE 27062 Top Load Washer

1 Answer

Kenmore oasis washer


top loaders use the same motor for wash pump and spin to spin the clothes the motor direction is reversed and a solenoid releases the drum brake allowing the drum to rotate this is governed by a set of clutch shoes in the pulley if these are worn then the machine wont spin at full speed but ol on the display indicates overload so check the solenoid is releasing the drum usually heard as a loud clunk on spin start

Apr 01, 2008 | Kenmore 4.5 cu. ft. Oasis Canyon Top Load...

1 Answer

Spin cycle noise problems


It is likely that you have an unbalanced load. Try spinning the machine with only water in it. If there are no noises now, you will need to re-distribute the load. We clothes are heavy!!

Jan 13, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 4.5 cu. ft. Oasis Canyon Top Load Washer Logo

733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5471 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...