Question about E-Machines eMachines Desktop PC

2 Answers

Blue Screen it wont let me get past the blue screen..no start menu or anything..after the blue it goes back to the gray screen with a big e on it ..and at the bottome it says f2 for setup or f10 for boot sequence..or something like that ..

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 489 Answers

When the computer first boots up, press the F8 key when the eMachines logo is replaced by the first Microsoft screen, then select Safe Mode from the list. If the computer will not boot in Safe Mode, you will need to boot from your Windows CD and select the repair installation option. If you can boot in Safe Mode, you will need to find out what is causing the system to reboot during startup. With the msconfig utility, disable all unnecessary startup programs and services, then try restarting the computer normally. If this works, you need to use the msconfig utility to add the startup programs and services back one-by-one until it fails to boot again (to locate your troublemaker). Keep repeating this until all services and programs (except the one causing the problem) are back in the lineup.

Posted on Jun 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Your Operating System (a.k.a OS) is not starting properly and may need a repair installation

- If problem still persists, then back up all your files off your Hard Drive and do a fresh installation of that OS.


If ANY assistance is needed, then please reply and/or PM me thank you; I am happy to help and/or assist you in any way with this problem.



Hope I helped

- donman92

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung LCD TV diagnosis. Possible tcon board?


T-con board is causing all your problems. You are correct. You can get parts from here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Sep 21, 2015 | Samsung Televison & Video

1 Answer

My HP Pavilion is stuck on the blue screen


While your system is still booting from start, keep hitting F11 to get past that point then proceed with the system recovery.

Nov 12, 2013 | HP Pavilion a6110n PC Desktop

1 Answer

Toshiba satelite a105 keeps looping in the boot menu


No blue screen or number, it use to work find, this problem start last week

Jul 05, 2017 | Toshiba Satellite A105-S1712 Notebook

2 Answers

My phone will not power up past the tracfone blue logo screen what should i do??


The below steps will resolve many small issues.1.Power off the phone.
2.Press and hold "Vol+", "Menu", and "Power" key until the phone goes to recovery mode.
3.Use "Vol+" and "Vol-" to move the cursor up and down.
4.Move cursor to "wipe data/factory reset", press "Back" key to select it.
5.Now move cursor down to "Yes - delete all user data" and press "Back" to select it.
6.The data will be erased.
7.The cursor will be on "reboot system now" at the end, so just press "Back" key to reboot the phone normally.
WARNING: All user data will be completely cleared; the phone will be in a factory reset status.So before you reset backup data first!! gud luck!!

Feb 23, 2013 | ZTE Cell Phones

1 Answer

Laptop wont start windows xp pro. goes to a blue


Take one memory stick out and test. Then do the other. Also checking each memory slot.

If not solved. When the computer starts, continually press F8 until you get startup menu- select SAFE MODE and fix the driver or software that is in startup
or

Roll back to last known configuration that worked.

While you are there- disable Auto Reboot on Failure.

May 02, 2010 | Computers & Internet

1 Answer

On Startup of my Panasonic CF52, It shows the blue Panasonic screen, then the windows loading screen, then it goes into a bright gray colored screen. It doesnt do anything more. Tried to restart and hit F8...


This is usually a problem associated with NOD32 or Cisco software conflicting with drivers or other software. If you can get past the grey screen even once, uninstall the software and reboot. If you can't get past the grey screen at all, then you might have to completely reinstall windows :(.

I'd look for professional hands-on help in this case if you're not comfortable doing this.

Dec 06, 2009 | Panasonic Toughbook CF-51 Notebook

1 Answer

Dell Inspiron 1520 laptop. Blue Screen


Dear, Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems. What you can do is if you have more than one memory modules, you can boot the system with single and see. If this is due to memory leakage issue, you can find it here

Oct 16, 2009 | Dell Inspiron 1520 Motherboard

1 Answer

Blue screen follwing a factory restore using ctrl+f11


your hdd is locked up!!! you need a new hdd....www.computereworld.com

Jan 11, 2009 | Dell Inspiron 8600 Notebook

1 Answer

ProView 19'' Widescreeen LCD Monitor problems


It guess it is upon the logic board is having problem.

Feb 10, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Blue screen


When booting up keep F8 pressed untill you see a screen come up with various things you can do. Using the updown keys select go back to a setting that last work[ or word ti that effect] click on that see what happens come back when you can

May 28, 2007 | Compaq Evo N620c Notebook

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...