Question about Bunn U3 / SS 20500-0000 Coffee Maker

1 Answer

Overflow problem when I hooked my u3 coffee machine it overflows through the overflow tube and then through the back side and continues until I turn off the water supply.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,618 Answers

Unplug machine and remove the water probe it is probably not reading the water level.
If it is leaking without the machine being plug in to power then the inlet solenoid is damaged.

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Miele 4066 Water overflowing


Yes - I agree with the above - the water tank has two magnets a low level and high level - both should move freely in the tank and float with the water level - they determine when the water solenoid is turned off and on - if stuck - it will cause the tank to overflow. If both magnets are there and they move freely - then the reed switch in the case in more than likely faulty.

Aug 19, 2014 | Miele Coffee System

1 Answer

My machine mark alternativley ventilate and fill water tank. I ventilate and I fill the machine and the message don't dissapear. With this display, I can't make any coffee. My email :...


Hi,
Remove the bottom of the coffee maker, identify two rubber tubes and check to see if one has come loose or is simply not on tight. A simple reattaching of one of the tubes will work.
Another reason could be draining hole getting clogged with coffee grounds. When this happens it is easily fixed by removing the brew group and overflow tray; find the small drain at the back that drains excess water into the overflow tray and opens it up with a pipe cleaner or tooth pick. Flush out any coffee ground behind that hole.

Hope this helps.

Shane

Mar 06, 2011 | Saeco Spidem Trevi Digital Plus Fully...

1 Answer

You can hear the pump pulling the water from the resevoir but it just comes out the overflow back into the tank


pinched flow tube ? it boils through the tube then shuts off @ boiling no pump yet >

Dec 19, 2010 | Keurig B60 Coffee Maker

1 Answer

My whilpool calypso continues to fill machine with water until it overflows.


What is happening is that the fill sensor is apparently not working. The washer will continue filling until it overflows the washer!
Replace the pressure switch. This will solve your problem and cost is about $35.00

Before replacing the switch check the hose which comes to the switch also

It is possible that hose has a hole in it or has come undone. If there is no pressure in the hose, then it wont actuate the switch, and thus fill forever.

If your air tube is in good shape, it could be the switch itself, it may be adjustable.

Jul 22, 2010 | Washing Machines

1 Answer

Fuel leaking out the overflow tube...


The overflow tube coming out behind the swingarm? If that is where it is coming from sounds like your float in one of the carbs could be stuck.

Mar 29, 2009 | 1997 Suzuki TL 1000 S

1 Answer

Washer continues to fill until it overflows


I had same problem today. It was just a tube disconnected from the water level sensor. Raise the top of the washer and look on the left side of the tub. There should be a plastic tube running from the water level sensor to the control panel. Make sure it is connected. If not simple reconnect the tube and you should be good to go.

Feb 01, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Overflowing basket


The grind on your coffee is too fine, and if not there is too much coffee in the basket, hence the overflow.

Jan 02, 2009 | Wega Mininova EPU Espresso Machine

1 Answer

Overflowed on Large load size


i think the water level sensor tube got filled when you had it on it's side, then after the first spin and drain cycle, the tube was again cleared out and ready for real action.

Oct 29, 2007 | GE WJSR1070A Top Load Washer

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bunn Coffee Makers & Espresso Machines Experts

Kelley Hopper

Level 2 Expert

60 Answers

Jim Y
Jim Y

Level 2 Expert

338 Answers

pawnpower

Level 2 Expert

102 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...