I bought the system 2 days ago but I never got the rear speakers working properly. Tryed to change wireless channels and ID-s but no luck. It seems my problem is unregular beacause i get a weak sound out of the speakers with a hiss. The sound is so weak that you have to feel the speakers working with a hand rather hear it ( it is possible to hear it if you put your ear near the speakers or but the voice very loud) The wireless blue light is working. help me :(
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i have just bought both the Samsung HTC-555 and the wireless module SWA-5000. I had the system setup accordingly and on doing the speaker test, all 6 speaker received the signal from the amp. This should mean that the system in working ok. However on watching a blu-ray movie recorded in DD5.1 channel on my PSP3, the rear speaker do not seem to have an output coming. Only the front and the woofer speaker are providing the sound! Any Input....
the speakers can handle about 45 watts rms a piece and the vr3 box can probabily handle 100 watts on its best day. your best bet is a 4 channel amp. use the front two channels for the jvc speakers and bridge the rear 2 channels for he vr3 box...keep the gains under 3/4 and tune the hrtz. fereq. to about 80 herts.hih pass filter on for the frot channel and low pass filter onfor the rear channel
Sometimes what happens is that people r just confused with all wirings.Considering that you have connected the speakers correctly...Now according to u the center speaker is not working
If u have a jack attached at the end of the speakers then try connecting the center speaker jack into the Right front/Right Rear/Left Rear socket at the back of the reciever.Just to make sure that your speakers r fine.
Secondly play an audio cd first,sumtimes a video DVD not being 5.1 channel one confuses a lot.
Assuming that you have checked the center speaker,like I asked u too,Connect it into its proper socket or better connect all the speakers.
Now with the remote you check the predefined equalizer in it n keep changing that [pop,rock,jazz etc] or you might even want it to change it to 5.1 from a 3channel or 2channel Stereo.Everytime you change it listen to every speaker.
Also check that you have increased all the speakers volume one-by-one.
Disconnect any headphones attached.
Switch on the selected source or select another source.
For further details u can check the manual.
The VGA cable of the monitor will work fine.
I have just bought one of these today and have had the exact same problem. No rear sound and no blue light on the receiver box.
Solution: What philips don't tell you in the manual and on the support site is that the receiver box has a switch hidden under a white sticker; next to the left of the right speaker connection. The switch has 3 positions which can be selected. I had tried each switch position and power cycled the subwoofer each time until eventually i got a blue light on the receiver box.
You may also need to select the correct channel on the control box by pressing the "sound" button for 5 seconds on the remote control.
It took me quite a while to try the different combinations until it finally worked. I can't imagine that Philips would have sent the system out without testing the wireless partnership first, so I am guessing my wireless network could have had something to do with it. (forever the optimist).
I did expect the subwoofer standby light to have gone off or changed colour once operational, but this just seems to stay on no matter what state it is in.
First, power down everything. Second, disconnect the rear speaker and subwoofer from the power source and wait about 5 minutes. Third, be sure the power switch is off on subwoofer and the center speaker. Fourth, plug in the power for the subwoofer but DO NOT turn on the power yet. Fifth, plug in the rear speaker power cord. Sixth, turn on the swtich on the subwoofer (this is the start of the resync mode). Seventh, turn on the center speaker power and the system will change the rear speaker system LED from flashing blue to solid blue in 5-8 seconds. The surround system is functioning again. You may test this under sound in the Control Panel but I would prefer to use a modern music CD that has Dolby Digital Support for 5.1 sound or better. YOU WILL HEAR INSTANTLY THE SOUND DIFFERENCE WHEN THE REAR SPEAKERS ARE CONNECTED.
I had the same problem with mine but i had the 224 version first worked nice just for a small system but i just got this one today and i hooked it up to a small sub box how i had the one before and it just dosent work the other one quit beforhand and i thought it just went bad so i figgerd id buy this one but after about and hr n 1/2 of work to show nothing kinda was a depressing moment, ive gone through my wireing about 4-5 times now and drawn it out 2 times on eveything ive done im just lost, ive even tryed diffrent rca and also tryed a diffrent radio and still nothjing tryed messing aorund with settings still nothing its kinda a bummer