Question about Linksys Wireless-G WRT54G Router

1 Answer

Links up as a rooter but it will not connect to internet the modem is a talktalk smartAX mt882 adsl modem and the rooter is a linksys wrt54gs-uk im in the uk i can see and link up to the network

Posted by on

  • alan_barbara Jun 02, 2009

    thank you this is now working fine

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Howdy,

Try this: 1- Logon to the router @ 192.168.1.1. Default username = blank (none). Default password = "admin" (no quotes). Then: 2- On the main opening page, reset the IP address from 192.168.1.1 to 192.168.2.1. Check (adjust) your timezone - etc. Then: 3- Click save at the bottom. At this point it will tell you settings successfully changed and it may try to return you to the page. But it won't be able to because you changed the IP address. Please close the browser and reopen and repeat logon as above using 192.168.2.1. If you can log in you have sucessfully changed the routers IP address. Certain modems will not function with the default IP address that comes with the router and must be changed. My setup is like this and I must do what is described above for my wrt54gs to function properly. Please use Internet Explorer browser if other browses do not work. Good luck.

J

Posted on Jun 02, 2009

  • Dr. Woo Jun 02, 2009

    Howdy,

    Glad this worked & glad to help.

    Cheers from USA!

    J


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do i a modem to use with my Linksys Wireless WRT54GS


You dont require a modem as there is a built in modem in linksys router.

May 28, 2012 | Linksys WRT54GS Wireless Broadband Router...

2 Answers

I have purchased usb driver of SmartAx mt882 By mistake driver is for xp but iam using win7 prof so can i purchase usb driver of smartAx mt882 For win7


you can download it online http://www.torrentdownloads.net/z/download%20smartax%20mt882%20usb%20driver%20for%20windows%207%20torrent

or
http://www.limetorrents.com/search/all/download-smartax-mt882-usb-driver-for-windows-7-torrent/
or
http://www.dl4all.com/ast/tag/huawei+smartax+mt882+windows+7+driver.html

Apr 05, 2011 | Microsoft Windows Vista Ultimate Edition

1 Answer

TalkTalk Modem Smartax MT882 to Netgear RP614 problem


Well your modem and router IP is same thats why you can't connect your router with modem

your have changed IP of the router,please follow steps to resolved your issue

RECONFIGURE THE ROUTER:
1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm or 192.168.0.1 address bar. press enter
4. On the basic setting page scroll to the bottom and click on Apply.
5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
6. Click on lan ip setup under advanced.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. Click Apply.
17. Logout of the router.
18. Open up another browser window and try to access internet.
Hope it can resolved your issue
Happy to help
Thanks for using Fixya

Apr 04, 2010 | NetGear RP614 54 Mbps 4-Port Web Safe...

3 Answers

I need Huawei smartAx X MT882 driver for windows 7


Well..i can give you a torrent link to the driver location. Before downloading the same you need to download a torrent client. Its available free of cost over the net.

Nov 26, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

I hv a netgear wireless adsl modem and i m using bsnl broadband connection can send me the settings to configure the modem at my email id mehtaankur3@gmail.com


TYPE-I Modem Configuration - Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL Modem Configuration

SmartAx MT880 ADSL Modem has One ethernet Port.
SmartAx MT882 ADSL Modem has One ethernet Port and one USB Port.

Set your computer IP address as 192.168.1.2
( If you are using USB port, install USB driver first)

Open Internet Explorer in the Address bar type the URL http://192.168.1.1

You will be propted for Username and Password.

Username: admin

Password: admin


Click on Home


Click on WAN setting


Your WAN Setting should be as follows:

PVC No.: PVC0

Wan type: PPP

Connection Type : PPPoE

VPI / VCI : 0/35

Default Route : Enabled

Username: yourusername@dataone

Password: yourpassword

Use DNS : Enabled

Click on Apply.


You will be asked to save and reboot.

Select Yes


Once your modem is rebooted , the summary page will be displayed .


The "Green" status of PVC0 status indicated that you are now connected. (in Summary page)

SmartAx MT882 ADSL Modem ADSL LED will turn 'Orange' from 'green' when succesfully connected

Sep 15, 2009 | NetGear WGR614 Wireless Router

1 Answer

The linksys wrt54gs-uk


With a DSL modem in the US, you need to confiugre the router for PPPOE with the username/password that was provided to you by your ISP. If you can't remember the name or password, contact your ISP

May 31, 2009 | Linksys Wireless-G Broadband Router

2 Answers

Trying to turn a Linksys WRT54GS into a hub


  1. If you want to set the router to work only as a switch with wireless access point, you may need to get into its setup page and adjust some settings.
  2. Using a computer that is wired directly to one of the router's Ethernet ports, launch IE and type 192.168.1.1. It is the default IP address of the router. Then it will open a window, asking for a username and password. By default, there is no username and the password is admin.
  3. Once you're in the router's User Interface, look for a sub tab called "Advanced Routing" under the main tab SETUP. Then set router mode to "Router" instead of Gateway. In some router's, the choice there is NAT enable or disable. If it is the one showing there instead of Router mode, then set NAT to disable. Click Save settings which is located at the bottom portion of the screen.
  4. Then click on "Basic Setup" and then disable DHCP server. Save the settings then.
  5. Then your modem now will be connected to one of the 4 Ethernet ports of the router.
Hope this helps!

Nov 21, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

ZYXEL P-660HW-T1 V2 WIRELESS ROUTER MODEM WILL NOT CONNECT TO MY ISP


is your router connected to your ISP ? (does your dsl led light up ??)
if no! check your wires from phone to router!! and check your SPLITER !!! (i had the same problem, i got bad spliter !!! NEW BUT FAULTY !!!)
chears

Sep 23, 2008 | Zyxel Prestige 660HW Wireless Router...

4 Answers

(HUAWEI SmartAx MT882), with Microsoft Windows VISTA


I am using one smatAX MT 882 modem supplied by BSNL for my desk top computer using XP with PPPOE(Point to point protocol over ehernet). When I am trying to run the driver with my VISTA LAP TOP, it is not getting loaded. Can any body provide some solution?

Amitabha Bandyopadhyay

Apr 29, 2008 | Microsoft Windows Vista Ultimate Edition

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...