Question about Office Equipment & Supplies

2 Answers

Printer is not connected with computer but i want to take test print how? please help

Posted by on

  • chintu_fir Jun 01, 2009

    model number canon pixma ip1000

  • Milan Cankovic
    Milan Cankovic May 11, 2010

    Can you specify the printer make and model ?


×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

You only have two buttons on top of it, one is to turn printer ON/OFF and other one is to resume or cancel printing.

I am not sure if it is possible to initiate test page print without printer being connected to the PC and drivers installed.

You might try holding ON/OFF button for 3-5 seconds to see if it will initiate the printing of test page, or pressing the other button once or holding it for 3-5 seconds.

If that doesn't start printing of the test page, then I guess the printer must be installed on the PC to be able to print.

You might find more information in these downloadable guides:

http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=Printers&series=Colour+Bubble+Jet+Printers&model=PIXMA+iP1000&menu=Manual

Good luck,

Milan

Posted on Jun 01, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 68 Answers

Just install your printer to your machine,or just use a network cable to communicate ur printer and your pc.

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer is not responding to when i ask to print something.


If the printer is not printing, check the cables connecting the printer and the computer. Make sure it is properly connected. Check the settings on your computer if printer is set as a default printer and try printing a test page from the driver page. To do this open printer and faxes, right click on the printer >properties and click the button print test page.

If you are able to print a test page, check the settings of your application and make that the correct printer is selected.

For further assistance, please contact Lexmark Technical Support

Jan 05, 2011 | Lexmark E260 Laser Printer

1 Answer

My hp printer 3535 wont printer.it says the files are ready.The printer wont print them.


Hi

Thanks for using FixYa. Please check that your printer has paper, has no paper jams and is currently set on the ‘use printer online’ settings by right clicking property and then setting it from there. Also please check that you have selected the correct default printer and drivers in the printer options. If there is any paper jams clear it. You can also check the few things like---
Please check that both ends of the cable which connects the printer to the computer are connected properly. To print a test page right click on printer properties and then click the 'Print Test Page' button and see if you get a test page printed properly. If you do, this indicates that the printer is properly connected to the computer and the computer has the drivers installed.


Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 04, 2009 | HP Office Equipment & Supplies

1 Answer

I have reconnected my HP PSC 1315 to my printer, however, I cannot get the printer to work. Can you please help me? The printer will not do anything. I have received a print test after I installed the...


Hi melovesjags:
Try these steps.
Does the product
print from the
computer?
Connect the parallel
cable or USB cable to the
product and the
computer. Use a wordprocessing
application to
send a print job to the
printer.
The cable is not
connected correctly.
Reconnect the cable.
An incorrect printer driver
is selected.
Select the correct printer driver.
Other devices are
connected to the parallel
or USB port.
Disconnect the other devices and try again
to print.
There is an LPT port
driver problem.
Reset the computer port settings. See your
computer user guide for instructions.
The formatter has failed. Replace the formatter.

Hope these help

Jul 06, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Printer wont print


Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.
Hope this help. Please Rate My Response! Thanks!
PREM

May 26, 2009 | HP DeskJet F380 All-In-One Printer

2 Answers

Unable to print on printer Dell 926 -test page prints ok


Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.
Hope this help. Please Rate My Response! Thanks!
PREM

May 23, 2009 | Dell 926 All-In-One InkJet Printer

1 Answer

Not printing


reboot the computer and the printer..
also try to do a "Print Test Page" by going to Start>Control Panel>Printers and Faxes , just right click on the printer icon(with a check mark on it) and select properties then click on Print Test Page"... if it still does not print, turn off the computer again, unplug the printer from the back of the computer ( I assume it's connected via USB), then plug the printer on a different usb slot on the computer.. you may have to re-install the drivers. make sure you have the cd for the printer.

May 09, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Hp 3325 printer printing test page and not printing other pages


Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.
Hope this help. Please Rate My Response! Thanks! 
PREM  
 

Apr 06, 2009 | HP DeskJet 3325 InkJet Printer

1 Answer

My printer will not print.


Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.
Hope this help. Please Rate My Response! Thanks! 
PREM  

Mar 21, 2009 | Epson Stylus CX3200 All-In-One InkJet...

1 Answer

My printer hp 1410 start printing job and in mid show message, failed to print. if 2 3 pages get printed properly , it skip one line of printing and ink gets dimmed.plez help me


Hi, 
Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing the cannon drivers and software it will ask you to connect the printer. 
  • then you can connect the printer and print a test page.
Hope this help. Please Rate My Response! Thanks! 
Prem 
 

Mar 02, 2009 | HP PSC 1510 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...