Question about Intec PlayStation 3 Infinite Play Wireless Controller

1 Answer

Ur controller will not connect to my system and ive tried repeatedly pressing and holding the ps button but got nowhere

I've watched as i try to conect to my ps3 and figured out it aint the controller its the usb thing i tried holding and repeatedly pressing the ps button but all that happens is all 4 lights blink so how the **** do i fix this so i can sonic with my sis

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

To link a new controller to a ps3 you have to use the USB connector for the first time.

Posted on Jun 01, 2009

  • intecsucks Dec 27, 2010

    your ******* kidding me

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ps3 av cable video doesn't work


Are you trying to change from HDMI to AV?

If so, try this:

Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until you here 3 beeps. Let go.



It should ask you to connect your controller via usb and press the PS button in

the middle of your controller. There will be a menu with 6 options. Try 1-4.

Jan 23, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

After using the hdmi cord, now trying to switch back to regular tv (red/yellow/white cord). Noted a few responses from similar questions, when in hdmi going to video settings but do not know which option...


Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until it goes off again.


That's it.


If it doesn't work, try this:



Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until you here 3 beeps. Let go.



It should ask you to connect your controller via usb and press the PS button in

the middle of your controller. There will be a menu with 6 options. Try 2-5.

Jan 22, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

My ps3 goes on but i dont see it on my tv


Try accessing the recovery menu 'safe mode'.



Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until you here 3 beeps. Let go.



It should ask you to connect your controller via usb and press the PS button in

the middle of your controller. There will be a menu with 6 options. Try 2-5.

Jan 21, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Blank playstaion menu screen no more sound help


sorry for the last post: Was thinking about connection problems:

Try accessing the recovery menu 'safe mode'.



Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until you here 3 beeps. Let go.



It should ask you to connect your controller via usb and press the PS button in

the middle of your controller. There will be a menu with 6 options. Try 2-5.

Jan 20, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

I turn my ps3 on it says ps3 and it freezes ive tried treoubleshooting it and it freezes on that too.please help!!


Try accessing the recovery menu 'safe mode'.

Press and hold the power button until the systems shuts off. (wait 2 seconds) Press and hold the power button again until you here 3 beeps. Let go.

It should ask you to connect your controller via usb and press the PS button in the middle of your controller. There will be a menu with 6 options. Try 2-5. If this doesn't work, you will definitely need to replace your HARD DRIVE. This is a problem that I have faced before.

When you replace your hard drive, you will need to have the latest firmware on a usb stick. Download the firmware from the playstation official website onto a usb stick. Once prompted by your system you will need to insert the usb stick into the PS3. Good luck..

You will need 2.5" Sata Hard Drive

mikeot2011_6.jpg

Jan 20, 2011 | Sony PlayStation® 3 (60 GB) Console

1 Answer

Everytime I turn on mu playstation 3, no picture comes out in TV.


Try accessing the recovery menu 'safe mode'.



Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until you here 3 beeps. Let go.



It should ask you to connect your controller via usb and press the PS button in

the middle of your controller. There will be a menu with 6 options. Try 2-5.


Try using HDMI cables and AV cables.

Jan 16, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Message on screen: connect the controller using usb cable, and press the ps button. do this and a other message comes up: system software cannot run .press ps button to restart and it does the same...


Try restoring your console.

When the system is off (red light) press and hold power button for 1 beep then two fast beeps and let go. The restore menu will pop up.

Mar 28, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Gigaware remote for ps3 cant connect


I can not locate a Remote For PS3 By Gigaware now if its a controller Follow these steps

Connect to PS3
1. Turn on your console and plug the receiver into the first port on the console. The RX indicator on the receiver flashes.
2. Slide POWER ON/OFF to ON to turn on the controller. The controller’s POWER indicator lights and the 4 port indicators flash.
3. The controller connects with the receiver automatically after about 3 seconds. If successful, the RX indicator on the receiver lights.
4. Press the PS button to assign a controller number. The corresponding port indicator lights.
Manual Search
If you are unable to automatically connect, try manual adjustment.
1. Repeat steps 1 and 2 under “Connect to PS3.”
2. Press CONNECT on the receiver. The RX indicator flashes.
6
3. Press and hold SELECT and L3 (left analog stick) on the controller simultaneously for at least 3 seconds. When the RX indicator stays lit, release SELECT and L3.
4. Press the PS button to assign a controller number. The corresponding port indicator lights.
n Notes:
• Repeat “Connect to PS3“ or “Manual Search“ if the connection fails again.
• If you purchase a new receiver for the controller, but have previously been using it with the supplied receiver, you will have to follow connection steps again.
Reassigning a controller number
1. Press and hold the PS button for one second. The functional screen displays. Select “Controller Settings”, then “Reassign the controller.” Press X to confirm.
2. Use the D-pad to select the number that matches the controller’s port.
3. Press X again to confirm. The corresponding port indicator lights up.
7
Connect to PC
1. Plug the recevier into a PC’s USB port. The receiver’s RX indicator flashes.
2. Slide POWER ON/OFF to ON to turn on the controller. If connection is successful, the RX indicator on the receiver lights and the 4 port indicators on the controller turn off.
Test the controller
1. Open the control panel on your PC, and double-click “Game Controllers.” Then click “Properties“ and the testing screen appears.
2. Press the buttons of the controller. After testing, press OK to exit. You are now ready to play games.
Troubleshooting
If the controller stops working at any time, or will not connect to PS3 or PC, follow “Manual Search“ steps on pages 5-6.

Dec 14, 2009 | Video Game Consoles & Games

3 Answers

Dualshock 3 sixaxis why does it always need to be plugged in


Once the controller is plugged in and connected to the console, hold down the PS button to select "turn off the system." Once the system has completed shutting down, unplug the controller and press the PS button. The console should turn on. If so, the controller will connect wirelessly. Unfortunately you'll have to do this with each controller but it works every time.

Feb 19, 2009 | Sony Dual Shock 3 Controller for...

Not finding what you are looking for?
Intec PlayStation 3 Infinite Play Wireless Controller Logo

1,181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intec Video Game Consoles & Games Experts

Martin Murray

Level 3 Expert

1623 Answers

David
David

Level 3 Expert

778 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you an Intec Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...