Question about VCRs

1 Answer

Orion vcr model vr313

I'm unable to set my channel to either 3 or 4 inorder to record shows.  I lost my manual that would show me how.  I s there a way I can get another one or you could tell me.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers
Re: orion vcr model vr313


You need not set your VCR to either CHs 3 or 4.  You simply have to set it to the channel that you would want to record. Further, the coax either from your cable or aerial should go straight to the VCR for it to receive any of the channels. The VCR then maybe hooked up to your TV either buy a shorter cable and this is when you set the TV to either 3 or 4. Alternately, you can use the RCA connector from your VCR to your TV.

This is a generic/compressed solution. Pls post back should you want additional information.

Good luck and kind regards.

Posted on Oct 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Panasonic PV-V4525S VCR and I'm trying to program it to work with the Comcast cable. Right now it will only record the same channel that the TV is on and I have to tell the VCR to record channel...

If your using digital cable it will only record channel 3 or 4 depending on what your cable box is set to...In order for it to record different channels it needs a cable source plugged directly into it. You will only be able to record standard cable channels 1-125. If it's digital cable forget about... you can only record it with channel 3/4 a solution to this would be using a 2nd digital box.. "auto-programming" may be limited even with a 2nd cable box. If your only using standard cable 1-125... you can use the TV/VCR button it will switch between the tuner of the TV & VCR allowing you to record while you watch a different show... keep in mind this won't work for digital channels which if I'm not mistaken comcast has already converted all channels to digital even basic.

Feb 13, 2011 | Panasonic PV-V4522 VHS VCR

1 Answer

I would like to tape my programs on the vcr(goldstar) I am not used to this product

do you wish to record while watching or while away.....while watching make sure your vcr is set to CH 3...when the show comes on press record
(a blank tape should be inserted) the red button on most vcrs.......while away the channel selector must be on the ch you wish to record...using the remote for the vcr press menu/program a event (this is where your vcr most have the correct date / time and not flashing 12:00)..set the day..time to start recording and time to stop recording..your ch will always be that vcr is set the main thing is make sure that cable channel selector is on that channel

happy recording

Aug 08, 2010 | VCRs

1 Answer

Taping to vhs from digital cable

You do not need to leave the TV on. To get the clearest picture you should connect the AV cables (yellow, white, red) from the cable box to the VCR, and from the VCR to the TV. There should be a setting on both the TV and the VCR to set the input to VIDEO so you don't have to use channel 3. You can shut the TV off while recording if you want. Also be careful because if you use the channel guide or info button while recording, it will show up on the tape.

May 20, 2009 | Samsung VR8460 VHS/S-VHS playback VCR

1 Answer

Quazar Model VHQ520/VHQ540 cannot record after inst Digital Conv

You need to set the vcr to channel 3 or 4 (whatever channel the digital converter box is set to broadcast on) to record a program. The digital converter box has to be set to the channel you want to record the show from.

Apr 09, 2009 | Quasar VHQ400 VHS VCR

2 Answers

Orion VCR 213 will not record with converter box

The chain of cabling that you have should go like this; First in line should be the wall supplying the cable box. Then, the cable box connects to the VCR, then the out of the VCR should go to the TV. Select whatever channel you desire, make sure that the VCR is on Channel 3 or 4, (Whichever the back of the cable box is set) then select 3,4 or line/AUX to see the results....accordianman

Dec 12, 2008 | Orion VR213 VHS VCR

2 Answers

Orion vcr recording

I'm sorry, but the speed cannot be changed without the remote.

Nov 07, 2008 | Orion VR213 VHS VCR

1 Answer

Programming Quasar VHQ940 for DTV converter box

I assume you're trying to record from the DTV box. You will have to set the DTV box to play through channel 3 then tell the VCR to record channel 3. So basically the VCR always THINKS it's recording channel 3, but in reality it's recording whatever channel the DTV box is on. You will be unable to used timed recording unless you leave the box on whatever channel it is you're wanting to tape.

Aug 05, 2008 | Quasar VHQ940 VHS VCR

1 Answer

Record tv

The VCR will have to be on channel 60 as well in order to record a program. Hope this helps....accordianman

Apr 25, 2008 | Quasar VHQ400 VHS VCR

2 Answers

Taping TV shows

You need to have an antenna in (from TV antenna or cable). Set the VCR to that channel and press RECORD. Or use the on screen menu to set up the recording time/channel

You really need to have a manual to find the step by step instructions for your VCR. Go to this website and search
for a VCR manual from Sharp. I was there and did not find the exact manual.Download a couple of ones that have similar model numbers and follow the process.

Or call Sharp and ask them to fax/email you a manual.


Oct 31, 2007 | VCRs

Not finding what you are looking for?
VCRs Logo

Related Topics:

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top VCRs Experts


Level 3 Expert

4518 Answers

alexander woolfolk
alexander woolfolk

Level 2 Expert

276 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a VCR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides