Question about Golden Technologies Companion II Travel Scooter

1 Answer

Erratic operation Runs slowly (shaking/shuddering) for a few feet, then stops dead. Have to push reset button, turn key off, then on again, and ease throttle forward. If throttle released quickly, the machine freezes up. Highly-suseptible to location of rotary knob. No car, so can't transport to fix-it facility. Is shop manual available so I can fix it myself? Or can a technician visit to diagnose the problem? I was forced to use starting batteries, instead of recommended GCM deep-cycle batteries, because of lack of car and lack of nearby scooter facilities. Would this make a difference?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Sounds like paddle assy. (engager) this is common problem. As for the batteries, deep-cycle (gel-cell are best) they are made to take many charges, hold charge longer and vent no fumes so their much safer.

Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be causing my car to shudder or shake intermittently when it is in gear?


Have someone check your transmission fluid level. Probably low, so the shifting up and down is compromised.

Jul 07, 2014 | 2003 Saturn L-Series

1 Answer

My samsung 3D led multisystem smart TV remote control does not work anymore


It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:
  1. TV off
  2. Bring remote within 3 feet of TV
  3. Push Pairing button (Paper Clip or other pointed object in button hole)
  4. Turn on TV
  5. Should be paired. Try remote channel or other buttons.
  6. If not, try 2 more times.
  7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

  1. TV off
samsung-3d-led-multisystem-smart-tv-tiee3lbaghb4kteyvqjgelx1-2-0.jpg
Within 3 feet of TV

samsung-3d-led-multisystem-smart-tv-tiee3lbaghb4kteyvqjgelx1-2-2.jpg
PAIRING
and RESET buttons:


samsung-3d-led-multisystem-smart-tv-tiee3lbaghb4kteyvqjgelx1-2-5.jpg

Apr 15, 2014 | Samsung TV Remote Control

1 Answer

Air conditioner shudders, stops blowing cold, then resets every 5 mins


Cleaned the filter this AM and closed the door but now a red
light keeps flashing.

Jul 19, 2013 | Sharp Cv-p12lx 11500 Btu Portable Air...

1 Answer

When I try to send a fax I get a redo message and no pages are sent...i have sent many faxes to this number....a message appeared after one page was scanned that said to prress clear and srop...i could not...


Please reset the Printer by following these steps:

Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.

Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.

Release "Stop/Reset" while holding down the "Power" button.

Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.

Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.

Push the "Power" button, then lift the MX310 cover open.

Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.

Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Feb 27, 2011 | Canon MX310 Office All-In-One Printer

1 Answer

How do I light pilot on Vaillant boiler


turn and push in button on your honeywell gas valve hold it in and spark lighter cont to hold for 20secs then ease finger off button very slowly pilot sould stay alight if not try again in 2mins best of l;uck

Sep 29, 2009 | Water Heaters

Not finding what you are looking for?
Golden Technologies Companion II Travel Scooter Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Golden Technologies Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Golden Technologies Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...