Question about Kyocera KM-1510 Copier

3 Answers

Km-1510 .. AP error code

Hello, i got a Kyocera Mita km-1510 and i think i ran out of toner.  So i bought another toner unit and tried to replace it.  I get an AP error code in the copier´s display and still doesnt dissappear after i have changed the toner.  What can i do?

Posted by on



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

AP = Adding Powder (toner) it's not an error
it's adding toner from the container into the developer unit while displaying AP. when there is enough toner in the container the AP will disappear and copies can be made when there is not enough toner in the container the toner empty light will come on.

Posted on Jan 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer got voted for 20 times.

  • Expert
  • 56 Answers

Did lamp under platen lit ? If not,probably you need to replace or vacuum waste toner reservoir and transport of toner from toner bottle in developer unit.

Posted on Nov 02, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Did you accidentally put Copystar (cs-1510) toner into your machine, The Kyocera and Copystar toner are keyed differently.

Posted on Nov 12, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the reason for giving me a error called AP?

Toner is being replenished inside the copier. Wait a few minutes. * Although the lamp under the platen may remain lit while "AP" is displayed, it is not a problem.
also try taking out toner cartridge and shaking it a few times,
it may be clumped up or empty.

Mar 04, 2015 | Kyocera Mita KM 1510 Laser Printer

1 Answer

What happen when kyocera KM-1505 is bringing error code J98

There's probably a time piece of paper or something blocking a sensor or pressing down on an actuator or something
try checking this then do a good clean of the unit.

Jan 16, 2015 | Kyocera Mita Km 1810 1510 1505 Copier Drum...

1 Answer

Km3060 error code 7300

Toner container problem
Toner level is not detected when toner
empty is detected.

Check the connection of connector YC5 on
the engine PWB and the continuity across
the connector terminals. Repair or replace if
Defective toner
container sensor.
Replace the toner container sensor.

May 14, 2014 | Kyocera Mita KM 1510 Laser Printer

1 Answer

What does the error message OP mean on my Kyocera mita KM-1500 copier?

From what I remember on this copier...... The software in the copier may be from another country.... OP or AP most likely the copier needs a new toner installed or could be a paper jam in the doc feeder. The codes were a bit messed up between different countries, I did not biuld them.... Good Luck

Dec 19, 2012 | Kyocera Mita Toner For Kyoceramita...

1 Answer

Kyocera Mita Photocopier KM-1530 Error code AP flashes at start up then C710

When AP flashes the toner is being replenished inside the copier. Wait a few minutes. You need to refill the toner.

Jun 09, 2011 | Office Equipment & Supplies

1 Answer

We have a Kyocera Mita KM 1510 and I am getting an error code C710 and the add toner light is on. I put in a new toner cartridge but the error message and the light are still on. Any suggestions?

C 710 is a Toner Sensor Problem

Defective toner sensor - Replace toner sensor

Poor contact of the toner sensor connector terminals - Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace cable.

Developer problem - Replace developer.

Apr 07, 2011 | Kyocera Mita KM 1510 Laser Printer

1 Answer

We have a kyocera mita km-1505 photocopier. The error message coming up is AP. Can you tell me what we need to do with it?

just check the toner cartridge maybe the toner is empty if its empty just replace a new one

Dec 06, 2010 | Kyocera KM-1505 Copier

1 Answer

AP machine code on my kyocera 1810

AP means add powder in this case the powder is toner. Your machine has run out of toner please replace anew toner.

Sep 27, 2010 | Kyocera KM-1510 Copier

1 Answer


when ap code is coming add toner. when the toner is empty this code displays.

Nov 23, 2008 | Kyocera Mita KMR-1810P Laser Printer

Not finding what you are looking for?
Kyocera KM-1510 Copier Logo

4,024 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

Chris Schutte

Level 2 Expert

51 Answers

Henry Gertcher

Level 2 Expert

48 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides