Question about KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

2 Answers

The light on the buttons that say cancel and normal are flashing and the dishwasher won't turn on.

My kitchenaid dishwasher has stopped working. The touch button that says normal and cancel keep flashing (blinking) and nothing will turn on or off.

Posted by on

  • Anonymous Mar 31, 2014

    the buttons on the dishwasher keep blinking and cant get it to work

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

First thing to try is to disconnect power for 15 minutes and then try again if goes into default again take off bottom panel and behind the black trim will be a tech sheet see if it gives yousome diagonostics sounds like it may be the computer if the power off and on doesnt make it work,.

Posted on May 31, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove child lock

Posted on Jun 30, 2009

  • Joan Rogers
    Joan Rogers Sep 06, 2012

    where is the child lock

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool quiet partners II normal light flashing


CHECKING KEYPAD OPERATION
A rapidly blinking LED over one of the keys of the keypad (or sometimes a "dead" keypad/console)
To determine if the control or keypad is faulty, do the following test:
1. Unplug dishwasher or disconnect power.
2. Open the dishwasher door.
3. Open console and disconnect the keypad ribbon connection from the control (at P1).
Make sure all other connections are made.
4. Put console back together. Do not close the dishwasher door.
5. Plug in dishwasher or reconnect power.
6. Wait 5 seconds.
7. Close dishwasher door.
8. Monitor the control's response:
If the control is OK (no longer sees shorts with the keypad unplugged),
it will respond by turning on a Drain Motor for 2 minutes.
Check and/or replace the keypad if the control responds OK.
If the control is not OK (still sees shorts with the keypad unplugged),
then the drain motor will NOT respond and will remain off.
If no response, replace the control.

Dec 18, 2013 | KitchenAid 24 in. KUDI02IR Built-in...

1 Answer

I have a Kitchenaid KUDC25CHSSI and the cancel light flashes continuously, and will not stop unless I leave the dorr open for an hour or more. When I try to run it through a cycle, it fills with water...


Try turning the power off at the fuse box and leave it off for about 20 minutes or so, then turn it back on. There may also be a reset procedure in your manual. If the power cut off doesn't work, try to reset. If that doesn't work you probably will have to replace the touchpad.

Oct 30, 2013 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Kitchenaid dishwasher KUDS01DJ Rinse only light is flashing. control panel is frozen with only rinse only light flashing. does not respond to pressing of any buttons. I flipped the breaker switch,...


Ok, Turn breaker off at breaker panel. Just off then on. The rinse only light should be on.....not flashing. Now press the start button first and hold; then press the cancel button. That should cancel all lights. Then press wash button then start. If the light is still flashing after you turn off breaker....you might have a bigger problem. May need new control panel.

Aug 19, 2011 | KitchenAid KUDS01DJ - Multiple Color...

2 Answers

I can't turn on my KitchenAid Superba dishwasher. I pushed Normal and Start, and the Normal light started flashing, but didn't turn on. Pushed Cancel and now both the Normal and Cancel are...


Did you try turning off the power and then connecting it again?
If still problem is there open the door. Press the following sequence of buttons HI Temp Scrub, Energy Saver Dry,HI Temp Scrub, Energy Saver Dry. Now close the dishwasher door and latch it too and press the cancel button. This must reset the dishwasher.

Aug 13, 2011 | KitchenAid 24 in. KUDU02FR Built-in...

1 Answer

The clean light will not stop blinking so the normal cycle will not run


From another link, clean light flashes 7 times. Turn off breaker for dishwasher, wait 5 minutes, turn back on. with dishwasher door open, push high temp, energy save dry, high temp, energy save dry, then close door, open door, press cancel and then Normal wash cycle. Dishwasher Starts!!!!!! Save myself several hundred $. Was about to buy new one from Lowes!!!!!! Thanks everyone!

Feb 01, 2011 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Clean light keeps flashing and will not start.


Try the follow key dance, all within 5 seconds push:

HEATED DRY --- NORMAL ---- HEATED DRY --- NORMAL

wait for about 2 minutes then hit cancel

May 24, 2010 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Kitchenaid KUDS25SH


Hold the button down until it beeps and the light goes off. Eric

Sep 03, 2009 | KitchenAid 24 in. KUDS25SH Built-in...

1 Answer

Cancel light and rinse only light keep blinking and wont start


Hello,

Hopefully you have resolved your issue. I have not heard of the cancel light flashing issue. I have had problems with the clean light flashing seven times over and over and the control panel will not operate. Here is the solution to that. Maybe it will work for your issue as well.

Open dishwasher door,
Push Hi Temp Scrub button,
Push Saver Dry button,
Push Hi Temp Scrub button again,
Push Saver Dry button again,
All lights on control panel will come on.
Close dishwasher door,
Push Baked on Cookware or Normal Button.
Dishwasher should start and complete cycle.

It is good if you have kids that play video games. Their fingers are used to pushing buttons quickly. I guess this resets the control board. The service guy let me have this info as I used to deliver appliances and work on them somewhat.Hope this helps.

Good Luck,
Tom

Nov 26, 2008 | KitchenAid 24 in. KUDS01FLSS Built-In...

4 Answers

////////////////////my kitchenaid dishwasher lights are flashing


Can you explain the issue in detail - is your dishwasher not working at all, or the buttons continue to be lit up, etc?

First and foremost, check the dooe switch to see if it is functioning properly.

Nov 26, 2008 | KitchenAid 24 in. KUDS01FLBL Built-in...

1 Answer

Diswasher won't start


Try holding the reset button in for about ten seconds.

Nov 26, 2007 | KitchenAid 24 in. KUDP01IL - Multiple...

Not finding what you are looking for?
KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher Logo

789 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4340 Answers

Cindy Wells

Level 3 Expert

5159 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...