Question about Micro Innovations USB843S (USB843SEA) KVM Switch

2 Answers

Micro Innovations USB843S KVM Manual

I have searched and searched until I am getting so annoyed. When using my KVM it has an on screen display telling you what "box" you are on and supposedly you can name these box's whatever you want. But I would like to shut the on screen display off because it is annoying. Also when you first use the kvm it asks for a password to which is the default all 0's how do I change this.


Could someone point me to a user manual for this thing?




Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Micro Innovations USB843S KVM Manual

Yes this will work but only with the PS/2 keyboard plugged in, if you are using a USB keyboard this will not work.

Posted on May 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Micro Innovations USB843S KVM Manual

I had the same problem but then i remembered what my 2port kvm was like and you can hit scroll lock 2x then press the up and down arrow key to change ports and this is the same way and to get rid of the annoying scrren on top that tells you which port just hit escape, and to get the menu scroll lock twice and space bar.


Posted on Jul 18, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have connected my monitor to a kvm switch but it displays nothing on screen...please help

If you are getting no video then either the KVM Switch is not transmitting video or the cable is defective. I would recommend checking with the supplier of the KVM Switch you are using.

Jan 18, 2012 | HP TFT7600 Rackmount KVM Switch

1 Answer

I have a Eurovox Max V box which was working perfectly fine until I unplugged it on Firday evening and then replugged it back in on sat. Now it searches for programs as it did when it had been unplugged...

i would think that the problem is one of your fittings has become loose as you have signal dissconnect and try all your fittings to make sure no wires are touching if that is not successfull see if your neighbour got any work done while you had it plugged out

Jan 23, 2010 | StarView SV211K 2-port KVM...

1 Answer

XP Display turns off after switching to Win 7

search for WIN 7 & KVM switch issues... you will find thousand of hits, because WIN 7 has one unique feature where it disables internal and external ports if these are not in use.

In a KVM solution setup this would mean, while you are connected everything is fine, now when you switch over to your (Lets say) WIN XP and work for 30 minutes on it... and then switch back, WIN 7 might have already scanned and seen that the USB port where the KVM cable comes in is IDLE... so it disconnected it... you cannot get it back until you reboot your WIN 7 system. Its not the KVM solution is one of those Microsoft wonder weapons that breaks what has worked for 20 years

Jan 17, 2010 | Avocent SwitchView 2-port KVM Switch

2 Answers

The display on my laptop screen

in video card advanced properties there is a rotate option
I don't know which videocard you have but you can go to display settings from control panel click on advanced button and enter to video card settins. There should be the rotate option

Jul 30, 2009 | Compaq 262585-B21 16-port KVM Switch

1 Answer

Ntl eurovox ireland

go back to the (Menu) screen then (installation) and (OK) on (User Installation) again enter 0000 as your pin, Now press the yellow button for (Power Scan).
Start the search @ 290.00MHz & end it @ 420.00MHz using the symbol rate of 6.887Mbaud then hit (OK) to start the scan. could take a few minutes but should get all your channels back.

Dont suppose you could post the most recent codes up please?

Dec 25, 2008 | StarView SV211K 2-port KVM...

1 Answer

How to update codes?

h put it on a sky channel that displays codes need up dating . then press menu. then press the yellow button x x hope this works

Dec 10, 2008 | StarView SV211K 2-port KVM...

1 Answer

Codes and how to set box button on ur should pop up?? unless you got old box its bluebutton........then use ur remote to enter codes such as(letter A would be TV)it tells you at bottom of screen if your following these steps..........then 1st two boxes at top...............enter...............5A 01 if ur telewest.........then codes

key 00 = 98 B0 BA 52 D3 21 08 B4

KEY 01= D2 EA 29 B7 B5 52 E9 AD

then press................OK...............and then..............EXIT that should be you sorted always use remote to enter buttons u should see at bottom screen??

hope helps?/


Nov 29, 2008 | StarView SV211K 2-port KVM...

1 Answer


The switching software that you installed on your computer when you installed the KVM includes an optional setting called "scan" that can be set to automatically page between the two displays.

This is most often used when the device is used for network or server status monitoring. If you configured that to switch every one second I can see how that would be very annoying.

Check the configuration of the switching software to verify that the scan setting is turned off.

Nov 13, 2007 | Belkin F1DK102U 2-port KVM Switch

1 Answer

Out of frequency


Are you referring to a problem with a Compaq (242697-001) 8-port KVM Switch or on your display (projector?)?

If it is a display problem, start your PC in Safe Mode and go to your Display Properties. In the Settings tab, lower down your screen resolution and color quality. In the Advanced button, Monitor tab, lower down your Screen refresh rates.

Reboot. Do the same and increase settings slowly (by increments) till you get the "out of frequency" message again. Pressing escape would revert you back to the last setting that worked fine.

Hope this be of some help to you, otherwise pls post back with a more detailed description.

Good luck and kind regards.

Nov 01, 2007 | Compaq (242697-001) 8-port KVM Switch

Not finding what you are looking for?
Micro Innovations USB843S (USB843SEA) KVM Switch Logo

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Micro Innovations KVM Switches Experts


Level 3 Expert

18258 Answers


Level 2 Expert

191 Answers

Peter Parker
Peter Parker

Level 2 Expert

60 Answers

Are you a Micro Innovations KVM Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides