Question about Canon PIXMA MP130 All-In-One InkJet Printer

2 Answers

Error code 5800 for Pixma MP130. When try to get

Need info on how to fix Error code 5800 for Pixma MP130. Also, when try to get to Service mode always get "invalid key" when try to access service mode. Any way to get around this to then fix the 5800 problem? I have the message on my Pixma MP130 printer saying "check printer (5800). I have tried to unplug the printer and that did nothing, I cannot press any of the buttons on it as I get a reading of "invalid key." Any advice?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 489 Answers

You can try this:

Turn on the printer (MP130) and do the following:
1. Press MENU SCAN COPY SCAN to enter service mode
2. Use > to go to NVRAM ACCESS
3. Set ABS-M LEVEL to 0
4. Set ABS-P LEVEL to 0
5. Press STOP to exit

Done, hope it work.

Posted on May 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

Hi
the error indicates that the print head has gone over temperature for some reason. The only way that i know of to fix this is to replace the print head.
N.B. Some machines have the print head as part of the cartridge, if yours has seperate tanks, remove the ink tanks and take out the print by lifting the grey lever up then lift out the head.

Cheers

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does printer error code 5800 mean?


This is an ink overuse error. It may read 5B00 and not 5800.
No real easy fix as far as I know but this video might help. Good luck! https://www.youtube.com/watch?v=0waX_GF-h7U
This video might help

Dec 02, 2015 | Canon PIXMA Office Equipment & Supplies

1 Answer

Canon mp130 shows error "


To reset waste ink counter:
Press Menu-Scan-Copy-Scan to enter service menu.
Use arrow keys to scroll to "Service menu counter access".
Press OK.
Use arrow keys to scroll to "ABS-M DOT COUNT"
Press Copy.
Use arrow keys to reset count to zero.
Press OK.
Press Stop/Reset.


OR


Reset for mp130
turn on the printer press menu
press scan, copy, scan to enter service mode
use> to get to nvram
set ABS-M level to 0
Set ABS-P level to 0
Press stop to exit..........Done

i hope this help

Jan 26, 2011 | Canon PIXMA MP130 All-In-One InkJet...

3 Answers

My Canon Pixma MP130 keeps saying the ink waste absorber is almost full.


It's a shop repair since you have to take apart fully, and also use diagnostic mode to reset the error.

Jun 26, 2009 | Canon PIXMA MP130 All-In-One InkJet...

3 Answers

Canon MX 308


How to reset canon MX 308 ??
Error Code 5800
Any Software to reseter this printer?

Feb 24, 2009 | Canon PIXMA MX310 All-In-One Printer

7 Answers

CANON PIXMA ERROR 5800


The waste absorber is full ,Replace the pads
then if you still get the error,you can reset it by following the directions below.
(reset without replacing pads can cause damage)

1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by pressing <--- or ---> then OK
3)SET ABS-M LEVEL TO 0
4)OK

Jan 20, 2009 | Canon Pixma MP450 All-In-One InkJet...

3 Answers

Error (5800)


Waste ink is full counter reset.

Sep 15, 2008 | Canon PIXMA MP130 All-In-One InkJet...

1 Answer

Service error 5100 code pixma MP130


Hi You can Try have a go

Error Code 5100
Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.


All The Best: Pineworks

Jul 15, 2008 | Canon PIXMA MP130 All-In-One InkJet...

2 Answers

Canon MP130


0.gif Re: CANON WASTE TANK RESET CODES for Canon MP130 by tac (2/15/07 1:52 PM) reply + / - CANON MP130

Discharge of the code of the error of the overcrowding of sump - "pampersa"

1. You will include printer.
2. press button MENU, then SCAN, COPY and again SCAN - they entered into the service regime.
3. select NVRAM ACCESS and further BY OK.
4. select SET Abs- m level and advance value equal to zero.
5. select SET Abs- r level (if there is) and also you will establish into zero.
6. you will turn off printer by button POWER.

Jun 27, 2008 | Canon PIXMA MP130 All-In-One InkJet...

3 Answers

Service error 5200


I have problem with Canon Pixma IP1500.
System show me ERROR 5200, What means this service error?

May 12, 2008 | Canon PIXMA MP130 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

864 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...