Question about One For All URC-3021 Remote Control

1 Answer

Programming my remote

I need codes for this remote:  one for all remote# is URC-3021B00

i need it for a dvd/vcr combo which is a sansui and i need it for a dvd player which is a oriton

Posted by on

  • 28 more comments 
  • Anonymous Nov 02, 2007

    don't know how to operate remote, trying to manually enter code for sanyo tv

  • SECASIDES Nov 02, 2007

    NEED CODE LISTING FOR RCA HOME THEATRE AND RCA VCR FOR ONE FOR ALL UNIVERSAL REMOTE URC-3021B00

  • Anonymous Nov 03, 2007

    need codes for tv

  • Anonymous Nov 04, 2007

    i need to find the code for zenith tv,s

  • Anonymous Nov 04, 2007

    I need to reprogram my remote and i dont have the code

  • BOOOOO Nov 04, 2007

    I need to reprogram my remote and i dont have the code for it and my TV is a Sanyo

  • g ster Nov 05, 2007

    i know the code but do not know how to program it

  • g ster Nov 05, 2007

    do not know how to program code

  • suzana Nov 08, 2007

    need the instructions to program the remote control for my one for all

    UCR 4021BOO

  • Anonymous Nov 09, 2007

    Need programing literature

  • Anonymous Nov 09, 2007


    • one for all urc 3021

  • mikepoole Nov 11, 2007

    i lost the set up process and need to program my symphonic vcr

  • cane98 Nov 14, 2007

    need to program remote for sanyo but dont have the codes

  • Anonymous Nov 15, 2007

    i need the code zeneth tv

  • suzyqq Nov 15, 2007

    i want to program my RCA model F25441

  • riikkii Nov 26, 2007

    how to program remote

  • Anonymous Nov 26, 2007



    need codes

  • SEAU326 Dec 02, 2007

    i have misplaced the booklet for my remote and dont know any codes urc3021boo

  • sheff Dec 03, 2007

    I lost my codes for this remote

  • Anonymous Dec 03, 2007

    Philips Universal

  • gulley Dec 07, 2007

    i need code for my remote for a magnavox

  • Anonymous Jan 11, 2008

    NEED INSTRUCTION TO OPERATE ONEFOR ALL REMOTE URC-3021B00 TO OPERATE TOSHIBA TV

  • Anonymous Jan 19, 2008

    I need to program My dvd

  • Anonymous Jan 19, 2008

    I want to program a dvd with my remote.

  • Anonymous Feb 22, 2008

    how do I put the tv code into the remote

  • Anonymous Feb 23, 2008

    need to no the codes to program my tv its a curtis mathes

  • pamellalee Feb 23, 2008

    I need instructions on how to operate the control with the t.v. and dvd

  • Anonymous Feb 25, 2008

    i have a one for all urc-3021boo remote. my tv is a quasar tv, vcr combo. the problem is ,the remote works on all the functions except the sound control.so what can i do to get my remote to work on the sound like it does on the rest of the functions.

  • markimom914 Apr 16, 2008

    it won't work for the symphonic tv/vcr combo

  • Anonymous Jan 31, 2009

    does someone know the codes

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 259 Answers

You will find the codes in the manual


SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...

Posted on Dec 12, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Im looking for codes for a sylvania tv


The codes to try for Sylvania TVs are 0054 0030 0171.

The manual and codes are available from the One For All support site: http://www.oneforall-na.com/remote.php?type=URC%203021 . The link for codes is at the bottom right of the page.

However, most remotes are limited to codes for devices released 6 months or more before the remote was programmed. If your TV is newer than your remote, then you may need to get a newer remote.

I hope this helps.

Cindy Wells

Feb 25, 2011 | One For All URC-3021 Remote Control

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

1 Answer

I need to program the one for all URC-3021B00 to my sony tv


Hi,
Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page

Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.

Code for sony tv are 0000, 1100, 0810



Thank You

Sep 13, 2010 | One For All URC-3021 Remote Control

2 Answers

I need code for URC-3220 Universal remote control for toshiba tv/vcr in one.


I can help you reprogram your URC-3220 Universal Remote for your Toshiba TV/VCR Combo.

The Toshiba TV/VCR Combo codes are 1145 & 0845.

Please review my Fixya Tip posts for:

TV/VCR/DVD Combo Codes
Searching for the proper codes, or
Downloading the URC-3220 users manual / owners guide.

I hope that helps.

Apr 07, 2010 | Universal Remote Control Remote Control

2 Answers

Missing manual forurc-3021b00


 I need the codes for oneforall urc3021boo

Nov 29, 2008 | One For All URC-3021 Remote Control

1 Answer

HELP ME PLEASE


PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device

Here is a link to your manual:
http://www.ofausa.com/remote_manual/CTGA...

Nov 28, 2007 | One For All URC-3021 Remote Control

4 Answers

URC-3021B00


PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device

Here is a link to your manual:
http://www.ofausa.com/remote_manual/CTGA...

Nov 26, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

75304 Answers

Cindy Wells

Level 3 Expert

5382 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...