Question about Audio Players & Recorders

1 Answer

The cassette does not work and there is no power to the speakers and some of the lights do not work. can you help?.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 151 Answers

Its the problem of faulty amplifier in the unit.whioch controls the cassetes function and the skeaker connection internally on the main board.the amplier needs to be replaced.its called amplifier IC. and you can get it at local hardware store.or at  www.radioshack.com also getting it replaced by local electronics repair technician is advisable.as replacing amplifier is bit tough job.it has to properly soldered to make the unit work perfectly. this will help you. thanks.pleae do rate the solution.thank you for using fixya.keep updated.

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will it record on most cassette types


The difference between cassette types is the length of the tape and the quality of the tape. Your recorder will work on all types of cassettes.

Dec 17, 2015 | Panasonic RX-D55GC-K Boombox - High Power...

1 Answer

Marantz Legacy Series - no sound is getting to speakers from tuner or cassette.


It seams like the amplifer is not working and you are right but it certanly needs to be measured first.

Nov 28, 2013 | Marantz Tr 2242 Sb Legacy Series Pll...

1 Answer

Need wiring schematic for Kenwwod KRC-2000 cassette receiver


Yellow : Battery - should have a 1A inline fuse - (memory)
Red : Ignition - should have a 5A inline fuse - (power)
Black : Ground (chassis)
Light Blue : Power antenna

Green : Left Front Speaker
Orange : Right Front Speaker
Blue : Left Rear Speaker
Red : Right Rear Speaker
Gray : Common ground for all speakers

Hope this helps.

Nov 12, 2008 | Kenwood Audio Players & Recorders

1 Answer

Connecting Nakamichi 600 cassette deck to speakers


You must have an amplifier or receiver to connect between deck and speakers. The deck has no power amp

Aug 03, 2008 | Audio Players & Recorders

1 Answer

1995 Saab 900S Left speaker doesn't work when using tape player


sounds like the cassette adapter has a bad channel, or didn't fully seat into place. Try removing and re inserting, to play the other side of the adapter if the wires will allow it. Then auto reverse the cassette deck to allow a different portion of the cassette head to be used for the signal. Those cassette adapters are poor quality, and put alot of time on the mech.

Jul 12, 2008 | 1996 Saab 900

1 Answer

Converting a stereo system to an amplifier


IF YOU HAVE AN AUDIO OUT IN YOUR TV YOU CAN CONNECT IT INSTEAD OF CASSETTE PLAYER.AND YOU WILL HEAR YOUR TV PROGRAM THROUGH YOUR AMPLIFIER.ABOUT THE REST OF THE CIRCUIT CONNECT AMPLIFIER OUTPUT TO SPEAKERS AS USUAL CASE.

Feb 21, 2008 | Tascam 122MKIII Single Dual Cassette Deck

1 Answer

A. REAL SPEAKER CONNECTION B. CASSETT RECORDER NOT ENGAGING


A Real Speaker Jacks..
There should be a switch position on your system that you move to allow the sound to come out to standard speaker configuration or to multiple speaker configuration.
This switch may be on the front or rear panel.

Please have alook to see if its there....
Its possible the these Real speaker jacks are not wired to anything inside the amp system, and are there for use on a different model where the selector switch is supplied.

B Cassett Deck..
The clicking is caused by the motor trying to drive the wheels that turn the cassett tape.
It sounds like something is jamming the internal drive mechanism.
The drive belt may have come off or is stretched and is slipping.

Have a good look inside the front slot and you may see one of these items described above happening..

It may have to be serviced at a workshop.

Cheers From YUBEUT.

Dec 04, 2007 | Denon D-1000 Shelf System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5151 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...