Question about Hitachi CP-X327 Multimedia Projector

2 Answers

Lamp When turning on my projector(which I have two of that do the same thing) the power light flashes green for approximately 60 sec. then the Lamp light turns red, and the power light flashes red. Nothing is projected. I have contacted Hitachi, and was told to replace the lamp, and did so, but this did not fix the problem. Do you have any suggestions? No projection at all. The projector powers up and the LED flashes green. After awhile the projectors lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Lamp duration

Posted on Jun 12, 2010

  • Mark Wigmore
    Mark Wigmore Nov 20, 2013

    If there's no lamp, how to you see the Option menu to reset the lamp duration?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hitachi cprx 78 lcd projector all leds blink in red when i switch on the projector

Posted on Feb 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't figure out what is wrong with my Hitachi CP-X605 projector.


The ballast (which provides power for the lamp) might have gone bad. Check the voltage its outputting with a digital multimeter.

Aug 23, 2015 | Hitachi Office Equipment & Supplies

2 Answers

The projector turns on but won't project any light through the lens.


If this is a NEC VT series projector, Change the lamp. When if it continues to blink amber and not project and image after installing a new lamp check the lamp cover to see if the micro switch tab on the lamp cover broke off. Some models have a built in lens cover. If the cover is not slid over to open completely the light may not turn on.

May 19, 2014 | NEC VT800 LCD Projector

1 Answer

Projector not turning on


seems that the lamp is defective, pls test it

Have a good day! any question ,contact me,Please
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
Skype: lampdeng@hotmail.com
http://www.lampdeng.com

Feb 25, 2014 | Optoma EP739 Multimedia Projector

2 Answers

Benq w1000 project not turning on


Look at the manual page 34, for the indicator messages. I suspect it's the same problem I have (which I haven't had formally diagnosed yet!), which I believe is a defective fan. My projector had been making a really loud noise on startup, which varied in length and volume. Recently the projector has taken to turning itself off after being on for about a minute, and the power light flashes green, with the temp and lamp lights flashing red.

Jan 27, 2012 | BenQ W10000 Projector

1 Answer

Green Power light blinks for about 60 secs, then


YES New lamp needed the model number will be on old one does not take long to change if still got hand book shows how change

Nov 07, 2009 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

SONY 60" KDF-60XS955 power goes off and on every 30 sec


..got the lamp changed too..back to be where it was before, working perfectly good...saved a lot of mone from having it serviced at home...thank you all for the info....

Dec 08, 2007 | Sony Grand WEGA KDF-60XS955 60" Rear...

2 Answers

PLV-Z1 no longer powering up - Ready light is green and the Lamp light is red


I have a Sanyo XU35. Mine was starting up and showed a picture for about 15 - 30 seconds then shutting down. My lamp warning light was not coming on. When I put it in for repairs it turned out to be the lamp that needed replacing. The technician said it is not uncomman for the lamp to be gone and the lamp warning light not to come on. I got my lamp on e-bay from ping_ngo for a great price.

Aug 11, 2007 | Sanyo PLV Z1 Multimedia Projector

5 Answers

Lamp


I have the CP-X275W that did the same thing. The ballast was bad and I fixed it with a $5 switching regulator. The CP-X327 has the identical ballast.

Details:

The High Intensity Discharge Metal Halide lamp suddenly failed to light up. A new lamp was installed and would not light up either. The fan ran and the lamp LED flashed after a few minutes. Voltage to the ballast module was 368VDC. The ballast did not pulse.

Ballast# PS-226-LS-210 was bad. Hitachi Part# HA01101 has been discontinued and the new part number is HA01102. It was $210USD at Vance Baldwin or $221USD at Part Solver.

The FET series (TR1,5,6,7,8,) seemed good: (drain-source resistance=5Kohm). Bought an identical projector on Ebay to do comparative multimeter measurements. Found resistance differences in IC01 (STRG6153). Swapped good part to bad projector, and it worked. This is a 5-pin Sanken brand switching regulator, US$5 at www.electronix.com. They have the STRTG6153, which is compatible, and may be better. The bad one removed from the circuit measures 15Kohm on pin 3 to pin 5 and the same 15Kohm when the probes are reversed. The good one measures 18Mohm and infinite when the probes are reversed.

If you would like me to fix it for you and clean all your optics, I can do it for $150USD plus $25 return shipping. Contact Chris at chris_goulet@yahoo.ca.

If you have a new lamp for sale I would buy one for $100USD.

Good luck.

Dec 22, 2006 | Hitachi CP-X327 Multimedia Projector

Not finding what you are looking for?
Hitachi CP-X327 Multimedia Projector Logo

4,200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74377 Answers

Are you a Hitachi Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...