Question about Hitachi 51F500 51" Rear Projection HDTV-Ready Television

2 Answers

I need HELP FROM A REAL PRO, WHO KNOWS HIS STUFF, THANX

I need to vertically realign my projectors but my tv will not allow it, what do i do? made in feb of 2003, im needing the vinyl and protective layers of my tv, there are three parts, and im wondering if i can just by the two, also my alignment is out of control, and when i hit the magic focus button, it stops on red, i first had blue as a problem, but now i have red and blue! can i fix these problems my self, or is it worth taking this dinosaur bone in to get repaired? NEEDING THE BEST ADVISE A MAN CAN ASK FOR, THANKS!!

Posted by on

  • jason_laymon May 30, 2009

    51f500

  • Shahid Electronics
    Shahid Electronics May 11, 2010

    Hi
    Sounds your TV got convergence failure problem. Let me know exact model of TV to look for possible cause and solution.


×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 431 Answers

Hi I am vortash I have found a circuit diagram that may be helpful to you , if you are electrically competent and you sound as if you may be I think you will find this diagram both helpful and enlightening , it may help you decide the economics of your venture accordingly regards Vortash

Posted on May 30, 2009

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

OK,
Convergence out IC STK394-160 quantity 02 will be replaced in your TV.
Part available in Part Store, click and see an image and price info.
You can download service manual copy of Hitachi 51F500 from Manual Zone for small fee if you need detailed instructions, exploded view, schematics and part list of TV.

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are copies printing with vertical lines...faxes print correctly.


Your heads proheps needs realigning, in the software option for your. Model, or you will gave an actual button for it on your mashine.

Oct 03, 2014 | HP Hewlett Packard Officejet Pro 8600...

1 Answer

Need Live Chat Software For Real Time Customer Support


i tried eAssistance pro - excellent software...

Jul 03, 2013 | Computers & Internet

1 Answer

Image is bright but there is a slight issue - on the left hand side a purple line displays vertically. Anybody knows why is this fault appeared and how could it be solved.


There is three LCD in the projector red, green and blue. If green LCD make any fault mean line or dot or dots then screen show these line or dot in purple color:
If line is very straight and sharp edges then green LCD is faulty and need to be replaced.
If line is not straight and faded edges then some thing in LCD block so your projector need service

Feb 22, 2011 | Sony VPL PX40 Multimedia Projector

1 Answer

I connected the LCD Projector to L300 , satellite Pro Laptop but nothing happens. how do i configure ?


I have a Toshibe Satellite L30 and am having problems to connect the projector (BENQ 620c). It shows only searching and do not find the signal. I have tried with FN + F3 or F5 but it does't work. Can you help me to solve this issue? Thanx

Nov 19, 2009 | Toshiba Satellite Pro L300 Notebook

1 Answer

How to find remianing bulb life on Toshiba tlp411u data projector


go into the menu while it's on and it's under settings- lamp timer.

Jun 27, 2009 | Toshiba TLP 411 Multimedia Projector

1 Answer

Screen rolls maybe vertical sync


II NEED TO RESOLVE A PROBLEM OF VERTICAL SINCRONICE I SALLBE GRETFULL TO HAVE ADJUSTMENT INFORMATION I SHALL BE GRATEFULL IF YOU COULD HELP ME

May 26, 2009 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Double image, fuzzy picture


The problem was caused by poor projector alignment. Alignment was off because we recently moved the TV from a friends house.
This particular set allowed me to realign the projectors with the remote control from a setting in the TV's menu. It was as simple as opening the menu item then aligning the cross-hairs with the remotes cursor. There are 3 projectors, one for each color. One is fixed and the other two are movable. They need to be perfectly aimed in order to get a clear, properly colored image.
When you find yourself with an electronic device and no operators manual it pays to spend the time and effort to download it from the internet.

Problem solved, thanks
C L Ganske.

Apr 11, 2009 | Televison & Video

1 Answer

Follow up on the Optima 719 with vertical white line


Hi Abouttime

Tapping can fix most electrical things for a very short while - unexplainable !

But I have been working as a authorised service provider on mos brands of Projectors for over three years now and in all of the times the white line was a faulty Mainboard.

This is just my opinion and I only answer and provide a free service to those who are in need.

Wheter you take my advice or not is entirely up to you.

Kind Regards

Marrie

May 23, 2008 | Optoma EP719 XGA DLP PROJECTOR 2000L...

Not finding what you are looking for?
Hitachi 51F500 51" Rear Projection HDTV-Ready Television Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...