Question about Computers & Internet

1 Answer

Appear F1 to continue

When PC operates then appear "Press F1 to continue " on the black screen before entering Windows XP SP2 ,,, Why??
thank you

Posted by on

  • sherin_fahad May 30, 2009

    Please You answer is not obvious ,,, explain more ,,, what are the settings I should change in the bios setup ,, before pressing F10 ,, or no changes to do , please inform me ,i try with it the message appeare again ,, thak you ,, waiting for you reply.

  • sherin_fahad May 30, 2009

    Reminder ,, please help me

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

Becasue defaults bios settigns are loaded.
Wehn u power up press "del" key then u enter in bios setup
then press "F10" key then save settigns then exit
then it message not comes.

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

HOW TO REINSTALL WINDOWS XP OR INSTALLING CLEAN COPY


How to reinstall Windows XP operating system or installing fresh copy of Windows XP on your computer.

If your Windows XP operating system had problem due to corrupted files, viruses problem or you want to upgrade your system. This procedure will guide you in reinstalling your current Windows XP or installing fresh copy.

After this installing process, you need all your hardware drivers like Chipset Intel driver, LAN driver, Sound driver, WAN driver, Webcam driver and others for the computer to be fully operational. Otherwise, do not proceed on reinstalling you operating system if your do not have those hardware drivers.

CDROM drive is required for installing Windows XP. If you don't have in your notebook computer, use external CDROM drive to connect in your computer using a USB cable.


1. To start with, you need to back up your in blank CD all your important files before you begin installation produre because all the data will be wipe out.

2. When ready, start your computer and when booting press F2 to
BIOS setting.

3. On BIOS menu, choose the BOOT setting and change the priority boot to CDROM, exit and save.

In some laptops, you can skip this BIOS setting process by repeatedly pressing F9 key or F10key when booting your computer and it will run boot priority on CD.

4. Once you exit from BIOS, you computer will reboot and a message will appear " Press any key to boot from CD", press any key to enter into WINDOWS XP SET UP.

5. Belows instruction messages will appear:

* To set up Windows XP now, press ENTER
* To repair Windows XP installation using recovery console, press R
* To quit set up without installing Windows XP, press F3

Press ENTER to initiate the installation.

6. You will go to Windows XP license agreement and press F8 to agree.

7. You will ask you if you want to REPAIR or REINSTALL the operating system. It will appear like this. Just press ESC to proceed.

A. To repair the selected Windows XP installation, press R.
B. To continue installing fresh copy of Windows XP without repairing, press ESC.

From repairing your operating system, it will not removed all your files and other software installed in your computer including your hardware drivers installed. Just fixing the operating system.

For reinstalling the operating system, you need to back up all you files because it will wipe out all you datas in your computer.

8. After that, it ask you where partition you want to install the operating system. The message will display like this :

C : Partition1 [NTFS]
D : Partition2 [NTFS]
Unpartitioned Space

Use the directional key to navigate and choose C: Partition1 if you want reinstalling Windows XP and press enter.

If you want clean copy of Windows XP, you need to delete both partition by pressing L and install clean copy at Unpartitioned space. By these procedure, you will have C: drive only. D: Drive is delete.

9. After choosing the desire partition. this will appear :

* Format the partition using NTFS files system
* Format the partition using the NFTS file

I suggest to choose the first line which is the quick format. The 2nd line take too much time to install the operating system. Press to initiate the installation and it will be finish and reboot automatically. PART OF WINDOWS INSTALLATION IS FINISHED.

If you had interrupted installation which is asking for certain driver file, your CD installer maybe damage which cause files to be unreadable. Try to replace the new Windows XP installer CD to proceed and until finished installing OS.

10. Once it reboots, this time do not boot from CD or do not press any key to go to PART2 OF WINDOWS XP INSTALLATION PROCESS.

11. On the opening, regional and laguage option will appear, jus click next.

12. The it will ask to type your name & organization. Put you name and company if any and click next

13. Then, it will ask for CD key and type the 25 character CD key and click next

14. Then it will ask for computer name. You can change or leave it and click next.

15. Then, set your date and time zone and click next.

16. Then, it will ask you for workgroup and computer domain, just leave it and click next.

17. Now wait until the installation process end and it will again restart automatically.

18. Again, do not boot from CD and display setting will appear. Just click OK.

19. welcom to Microsoft Windows screen will appear. Just click next.

20. Helps protect your PC will appear and choose Turn on Automatic Updates ( Only if you install genuine Windows XP). Otherwise, I suggest to choose "Not right not" if you are installing copy only of Windows XP.

21. Who will use this computer message will appear. Just type your name on the first box and click next.

Also for your reference, here is the video for your convenient .



A thank you message will appear, Just click next and it is finished.

I hope it helps you and thank you for using FixYa !


For repairing the operating system here is the blog as other want it.








As per others demand, here is the video for Windows 7 and Windows Vista Operating system





on Dec 23, 2010 | Computers & Internet

1 Answer

After update the windows i restart my computer but the bluse screen of HP come and come restart and restart i press f8 and after i press stafe mode put nothing happen the blue screen of HP come


Hi,

Repair the Operating System.

  • Insert your Windows XP CD, save the bios settings and exit. Soon "Press any key to boot of CD" will appear on the screen, hit the space bar to continue.
  • Now setup will inspect your hardware and software, it then will load various files required for the repair. Just wait and be patient, this may take a few moments.
  • Soon a menu will appear (as pictured below), press enter to continue.
  • Now the "End User Agreement" Press "F8" if you agree, "ESC" if you don't.
  • You will now have to select the installation you wish to repair. Usually there is only one, but sometimes, there may be 2 or more (i.e. you have done a parallel install to resolve a problem), use the up/down arrow key to select the install, and then press "R" to continue.
  • Setup will now examine the disk be patient, it can take a few minutes.
  • Setup will go through a percentage - 1 to 100%
  • A screen will soon appear. Press "F3" to continue
  • Now setup will reboot system, wait 15 seconds or just press enter.
  • Now it is time to see if this has solved your problems.
Regards,
Riztech

May 23, 2011 | HP dc7100 SFF PC Desktop

1 Answer

My computer starts on black screen... drive 1 not found: serial ATA, SATA-2.. strike the F1 to continue, F2 to run.. if i press F1 it says NTLDR is missing what di i do? I have the operating sys. disk..


  • Insert the Windows XP CD-ROM into the CD drive, and then restart the computer.
  • Click to select any options that are required to start the computer from the CD drive if you are prompted.
  • When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
  • Press 1 (One) to select windows XP and then hit enter.
  • When you are prompted, type the Administrator password. If the administrator password is blank, just press ENTER.
  • At the command prompt, start typing

COPY D:\i386\ntldr C:\ (Considering that D is your CD Rom Drive)
COPY D:\i386\ntdetect C:\ (a file that may also be missing)


Then rebuild the boot configuration boot.ini file by
Attrib -H -R -S C:\boot.ini (if not found skip the next line)
DEL C:\boot.ini
BootCfg /Rebuild

Feb 03, 2011 | Dell Dimension E310 PC Desktop

1 Answer

How to restore Dell Dimension 8200 to original factory setting?


  1. Insert the Operating System CD into the CD or DVD drive.

Close any program or utility that may start to run after you insert the CD into the drive.
note.gif HINT: The CD that you need to place in your CD or DVD drive is titled Operating System.
  1. Turn off the computer, and then turn the computer on again.

  2. When the blue Dell logo appears, press immediately.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down the computer and try again.
  1. Use the arrow keys to select the CD-ROM option, and then press .

  2. When the Windows XP Setup screen appears, press to select To set up Windows now.

  3. Read the information in the License Agreement window, and then press on your keyboard to agree with the license information.

  4. If your computer already has Windows XP installed and you want to recover your current Windows XP data, type r to select the repair option, and then go to step 15.

If you want to install a new copy of Windows XP, press to select the fresh copy option, and then press on the next screen to select the highlighted partition (recommended). Then follow the instructions on the screen.

The Windows XP Setup screen appears and Windows XP begins to copy files and install the devices. The computer automatically restarts multiple times before it requires additional input.
  1. When the Welcome to Microsoft screen appears, click the green arrow icon at the bottom of the screen to continue. Follow the on-screen directions to finish.

  2. When the Regional Settings screen appears, select the settings for your locale, and then click Next.

  3. Enter your name and organization in the Personalize Your Software screen, and then click Next.

  4. If you are reinstalling Windows XP Home Edition, enter a name for your computer when the Computer Namewindow appears, and then click Next.

If you are reinstalling Windows XP Professional, enter a name for your computer and a password when theComputer Name and Administrator Password window appears, and then click Next.
  1. If you have a modem installed and the Modem Dialing Information screen appears, enter the requested information, and then click Next.

  2. Enter the date, time, and time zone in the Date and Time Settings window, and then click Next.

  3. If you have a network card in your computer, select the appropriate network settings. If you do not have a network card, this option does not appear.

Windows XP begins to install its components and configure the computer. The computer automatically restarts.
  1. When the Welcome to Microsoft screen appears, click the green arrow icon at the bottom of the screen to continue. Follow the on-screen directions to finish.

  2. Remove the CD from the drive.

  3. Reinstall the appropriate drivers. See "Reinstalling Drivers."

  4. Reinstall your virus protection software.

Sep 11, 2010 | Dell Dimension 8200 PC Desktop

1 Answer

Blue screen


Please press f1 ,it will take u to bios ,reset that with f5.......
and also after that remove each and evry cable and then press power button for 1 min and then replug the cable

May 01, 2010 | Microsoft Windows XP Professional SP2

1 Answer

Missing boot.ini cant find it and missing logon.exe


  1. Configure the computer to start from the CD-ROM or DVD-ROM drive. For information about how to do this, see your computer documentation, or contact your computer manufacturer.
  2. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and then restart your computer.
  3. When you receive the "Press any key to boot from CD" message, press a key to start your computer from the Windows XP CD-ROM.
  4. When you receive the "Welcome to Setup" message, press R to start the Recovery Console.
  5. If you have a dual-boot or multiple-boot computer, select the installation that you have to use from the Recovery Console.
  6. When you are prompted, type the administrator password, and then press ENTER.
  7. At the command prompt, type bootcfg /list, and then press ENTER. The entries in your current Boot.ini file appear on the screen.
  8. At the command prompt, type bootcfg /rebuild, and then press ENTER. This command scans the hard disks of the computer for Windows XP, Microsoft Windows 2000, or Microsoft Windows NT installations, and then displays the results. Follow the instructions that appear on the screen to add the Windows installations to the Boot.ini file. For example, follow these steps to add a Windows XP installation to the Boot.ini file:
    1. When you receive a message that is similar to the following message, press Y: Total Identified Windows Installs: 1

      [1] C:\Windows
      Add installation to boot list? (Yes/No/All)
    2. You receive a message that is similar to the following message: Enter Load Identifier This is the name of the operating system. When you receive this message, type the name of your operating system, and then press ENTER. This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition.
    3. You receive a message that is similar to the following: Enter OS Load options When you receive this message, type /fastdetect, and then press ENTER.

      Note The instructions that appear on your screen may be different, depending on the configuration of your computer.
  9. Type exit, and then press ENTER to quit Recovery Console. Your computer restarts, and the updated boot list appears when you receive the "Please select the operating system to start" message.

Oct 03, 2009 | Acer Aspire One PC Notebook

2 Answers

Install xp creating new partition


Real easy. Start computer and press F1 or what ever you do to get into the BIOS. When the BIOS screen appears find boot options. Enter it and select cd or DVD sequence to boot first. Before you leave the BIOS make sure you save the BIOS. When the computer starts up and this time it will passes the BIOS setup, a prompt on the screen will display a message press any key to boot from cd or DVD. Of course when that message appears you want to hit at least one key on the keyboard. Next, it should say loading windows and a blue screen will appear.
When things stop it will prompt you to press enter to install xp and then F8 to promise your doing things right.
Now comes where it says do you want a new partition and next, shows the memory available. Here's where you to delete if there's a partition already there or create one. I think you press c to create and press enter. Next it will ask if you want to install a fresh copy xp. enter yes.
From here on out, you shouldn't have to do anything for at least 45min. It will turn it self off and on and eventually start having you answer question to set-up xp account.

Sep 19, 2009 | Microsoft Windows XP Professional for PC

2 Answers

Monitor goes to BIOS Screen Repeatedly


Your monitor is fine, the problem here is with your computer, and sounds like a virus. Time to competely reinstall windows, or have a tech look at the computer.

Aug 01, 2009 | Microsoft Windows XP Professional SP2 Full...

2 Answers

I cant start my computer because system32\driver\isanpn.sys is missing or corrupt


You need to replace that missing or corrupt system file. If you don't have your disk, you can borrow someone else's Windows XP disk (SP2) because you will need an XP disk to access the recovery console to replace isanpn.sys file.

Here's a link to the full steps on Microsoft's website to go to the recovery console and replace that file:

http://support.microsoft.com/kb/315311

Apr 16, 2009 | Microsoft Windows XP Home Edition for PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...