Question about Akai Televison & Video

2 Answers

When the TV comes on the display shows a mainly black background except for the upper left 1/4 of the screen which is normal. overlaying the black/grey background of the other 3/4 of the screen is a web with the center in the lower left corner the spider's solid but uneven silk lines runs out from the center of the web in all directions. Just left of center of the screen are 8 different colored lines running vertically from near the top to center. On the left edge are numerous multi colored vertical lines. The TV receives and displays DVD, TV or other inputs but only in that 1/4 area upper left. This is a LCT37Z4AD LCD "37" Inch Flat Screen. I have a 1 yr. warranty and have used it only maybe 24 hours. I movd to the Republic of Panama but the TV was well cushioned and was never dropped or hit.

Posted by on

  • hoosiermusic Jun 05, 2009

    TV was working fine when I left the U.S. It must have jarred something loose during the 4,000 mile trip to Panama although it was never hit, dropped and was padded. What could have come loose to cause this result.
    Ron

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI, what is the make of you set? I see the modle number but, i need to know the maker of this LCD unit please?

Posted on Jun 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi

Please check the connections if they are fine then try using a different power socket, if it does not work then it is vertical IC going bad however as you said you have 1year warranty so it is always recommended to use that as opening up the unit will void the warranty which I would not recommend. Please call the store from where you purchased the TV to get a local address and they should replace the unit as to avoid future issues.

Please do accept the solution and revert for further assistance.

Thanks
Rylee

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model 42LG70. Why is nothing on screen except for horizontal green and pink pixel line?


Black square on the screen Vizio Gallevia 47" 1080p - Fixya

www.fixya.com/support/t355299-black_square_screen_vizio_gallevia_47
Jan 16, 2008 - Black square sized app. 10"x10" pops up on the bottom right corner of the screen and won't go away. .... Model 42LG70. Why is nothing on screen except for horizontal green and pink pixel line? I am looking at replacing the ...

bad screens display vertical lines with a white background ...

https://www.ifixit.com/.../bad+screens+display+vertical+lines+with+...

iFixitJun 17, 2014 - I am now replacing a screen on a different G2 and I am on the secondscreen. ... A touchscreen smartphone made by LG Released: 09/2013 Model: VS980..... on the rigth side, from the top to the botton has 6/7 black lines.Missing: 42lg70 ‎pixel

Broken LG LCD TV Capacitor Black Screen My Wont Turn ...

? 6:27
https://www.youtube.com/watch?v=EbGiXqBAvvo
Aug 25, 2010 - Uploaded by FixItUrselfDummy
Broken LG LCD TV Capacitor Black Screen My Wont Turn On ...How I fixed my LG TV, Won't turn on or show picture Model: LG42LC7D ...Missing: horizontal ‎pink ‎pixel ‎line

Jan 05, 2016 | LG Televison & Video

1 Answer

HOW TO SET OVERLAY OPTION IN IR 3300


ID CARD OVERLAY SETTING IN CANON IR 3300
1 go on speacial features --- imeg combination --- select A5R --- 2on1--select paper tray A4 --- ok--done.
(dont do press reset otherwise setting will erase).
after that comes again in speacial features ---mode memory ---select M1 ---- go in store /erase ---store ----next ----its show setting A5 2 on1 select yes ---ok ---done. reset (this setting will store in your speacial features if u wants to use it u can use special features ---mode memory select M1ok).
if u wants that this funection show on main screen
then press * additional funection key -----standard key 1 setting --
mode memory ---m1 ok ---done ---done .
u can replace the name of m1 to overlay but i think no need for it.
do it and reply here.

Mar 14, 2015 | Canon Ir 3300 Black & White Copier

1 Answer

I have a black square on which my twitter profile information sits - how do I change the black background to something else?


If you want to upload your own background image or customize the sidebar and color scheme of your page, follow the steps below.

  1. Sign in to your account.
  2. Go to your Settings and click on the Design tab.
  3. Scroll down to the Customize your own section.
  4. Click on Choose file to upload a background image. images justify to the top left of the screen. You cannot stretch your image to fit. It will display as the size you uploaded (file must be smaller than 2MB).
  5. Check the box to Tile background if you want your picture to repeat across the background.
  6. Choose whether your Background position will be left, center or right.
  7. If your image isn't very large, choose the background color that will show behind the image.
  8. Choose a color for links.
  9. Choose a black or white transparent overlay.
  10. Click Save changes.

Source: Customizing your profile design

Jan 09, 2014 | Computers & Internet

1 Answer

Black background web pages


Step 1:
Web Pages That Do Not Display All Colors

Web pages that do not display all the appropriate colors have either a browser-related issue, monitor display problem, Windows comparability glitch or incorrect web pages Internet and HTML settings. More than likely, a setting dealing with your contrast ratio in Windows is the culprit. Once this issue is resolved, your web pages will display properly and accurately like they were designed to from the start.

Click on "Start" and navigate to the right pane and click on the "Control Panel." Click on "Ease of Access." Click on "Ease of Access Center." Click on "Set Up High Contrast" (one white and black box overlapping each other.) Check or uncheck "Turn on or off High Contrast when left ALT + left SHIFT + PRINT SCREEN." Click on "Apply" and close the Ease of Access Center. Press "ALT + left SHIFT + PRINT SCREEN" to turn on high contrast. Open your browser and go to a website to determine if color is restored to normal.
http://en.kioskea.net/faq/60-white-background-s-problem-in-web-pages

Feb 05, 2013 | Microsoft Internet Explorer 7

1 Answer

How to reset a samsung pl201?


.adslot-overlay {position: absolute; font-family: arial, sans-serif; background-color: rgba(0,0,0,0.65); border: 2px solid rgba(0,0,0,0.65); color: white !important; margin: 0; z-index: 2147483647; text-decoration: none; box-sizing: border-box; text-align: left;}.adslot-overlay-iframed {top: 0; left: 0; right: 0; bottom: 0;}.slotname {position: absolute; top: 0; left: 0; right: 0; font-size: 13px; font-weight: bold; padding: 3px 0 3px 6px; vertical-align: middle; background-color: rgba(0,0,0,0.45); text-overflow: ellipsis; white-space: nowrap; overflow: hidden;}.slotname span {text-align: left; text-decoration: none; text-transform: capitalize;}.revenue {position: absolute; bottom: 0; left: 0; right: 0; font-size: 11px; padding: 3px 0 3px 6px; vertial-align: middle; text-align: left; background-color: rgba(0,0,0,0.45); font-weight: bold; text-overflow: ellipsis; overflow: hidden; white-space: nowrap;}.revenue .name {color: #ccc;}.revenue .horizontal .metric {display: inline-block; padding-right: 1.5em;}.revenue .horizontal .name {padding-right: 0.5em;}.revenue .vertical .metric {display: block; line-height: 1.5em; margin-bottom: 0.5em;}.revenue .vertical .name, .revenue .vertical .value {display: block;}.revenue .square .metric, .revenue .button .metric {display: table-row;}.revenue .square .metric {line-height: 1.5em;}.revenue .square .name, .revenue .square .value, .revenue .button .value {display: table-cell;}.revenue .square .name {padding-right: 1.5em;}.revenue .button .name {display: block; margin-right: 0.5em; width: 1em; overflow: hidden; text-overflow: clip;}.revenue .button .name:first-letter {margin-right: 1.5em;}a.adslot-overlay:hover {border: 2px solid rgba(58,106,173,0.9);}a.adslot-overlay:hover .slotname {border-bottom: 1px solid rgba(81,132,210,0.9); background-color: rgba(58,106,173,0.9);}a.adslot-overlay:hover .revenue {border-top: 1px solid rgba(81,132,210,0.9); background-color: rgba(58,106,173,0.9);}div.adslot-overlay:hover {cursor: not-allowed; border: 2px solid rgba(64,64,64,0.9);}div.adslot-overlay:hover .slotname {border-bottom: 1px solid rgba(128,128,128,0.9); background-color: rgba(64,64,64,0.9);}div.adslot-overlay:hover .revenue {border-top: 1px solid rgba(128,128,128,0.9); background-color: rgba(64,64,64,0.9);}6_4_2012_11_48_48_am.jpgTurn The inner bit towards you until it goes in fully then turn it on and it might work. Thats what I did and it worked

Feb 12, 2012 | Office Equipment & Supplies

2 Answers

Top half of screen malfunctioning - Exactly the same as dclurman


You have a bad upper Y buffer board, not sure what the part# is, but they usually sell for btwn $200-$400
thanks
Eric

Aug 26, 2009 | Pioneer PDP-5060HD 50 in. Plasma...

1 Answer

Philips 23PF9966/37 color problem!


Most likely you can adjust it in the Service Alignment Mode (SAM).

Press 062596 followed by the STATUS button (upper left). Navigate to "White Tone", press the right key to enter and select "Normal" mode. Set the colors:

Red = 135, Green = 128, Blue = 133.

The "Cool" and "Warm" menus are deltas from the "Normal" settings:

COOL: R -3, G -1, B 5
WARM: R 2, G -3, B -13

Press the "MENU" button to return to the main menu, then the "Power" button to turn the TV off.

Jun 15, 2009 | Philips 26PF9966 26 in. LCD Television

1 Answer

Powerpoint video won't play on screen


you can try changing your overlay settings. works with some formats. or you could use the projector as main display (toggle through fn+LCD/CRT)

Feb 10, 2009 | Epson PowerLite 50c Multimedia Projector

2 Answers

Tv guide on our LG tv


If, when selecting the guide, the entire screen is black (except for the preview in the corner), then the digital main board has gone bad and will need replaced.

Hope this helps, please rate my solution.

Jan 09, 2009 | LG 32LX1D 32 in. LCD Television

1 Answer

Video Problems with Windows Media Player


Why is the projected video black in the Player? If you can see the Player, but the Video and Visualization pane is black, this usually indicates that your video card is not configured correctly. You can usually correct this problem by changing the video acceleration and/or overlay settings for your video card. To change video acceleration, do the following: 1. In Windows Media Player, on the Tools menu, click Options. 2. In the Options dialog box, click the Performance tab. 3. In the Video Acceleration area, move the slider to adjust the video-acceleration capabilities of your video hardware. Drag the slider to Full to use all available video acceleration. Drag the slider to None to use basic video-acceleration settings that work with most video hardware. To change overlay settings, do the following: 1. In Windows Media Player, on the Tools menu, click Options. 2. In the Options dialog box, click the Performance tab. 3. In the Video Acceleration area, click the Advanced button. 4. In the Video Acceleration Settings dialog box, under Video Acceleration, clear the Use overlays check box.

Aug 18, 2007 | Smart Technologies SMART Board 580 (SB580)

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2317 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...