Question about LG Shine KE970 Cellular Phone

1 Answer

"Please insert a disk into drive.. "

Hi,

I can't seem to get the USB  connection working. The connectivity is set at 'Mass Storage' but whenever I go to access either drive, the above error message comes up. Any ideas? This is somewhat infuriating.

Bill

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 452 Answers

  • u can install lg internet kit from " wowlg.com" then u can connect with ur USB for connectivity,
  • for connecting internet u need to select 'com port' option instead of mass storage .
  •  or if u want to trfr data from mobile to PC or vice versa u can selecrt the option of mass storage , then automatically ur h.set wil restart,u wil get the option USB "ON" on ur mobile. u wil get new link in ur PC "removable device " in option My computer, open that to trfr data.

Posted on Oct 23, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I down load photo's from my Samsung 2 phone please


First make sure you have the correct USB drivers for your phone installed on your pc. Go to device manager and see if your phone or mass storage device is listed. If not, download the drivers here, http://www.samsung.com/us/support/downloads. Make sure debugging on your phone is enabled. Please refer to the following:


  1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > Applications > Development" and enable "USB debugging".


  2. Then drag the status bar down and tap on "USB connected".


  3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".

A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

Samsung Galaxy S2 (Android 4.0)

  1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > More... > USB utilities" and tap on "Connect Storage to PC".


  2. Then plug the USB cable into the device and connect to your computer.


  3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".


  4. A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.
Samsung Galaxy S2 (Android 2.3)

  1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > Applications > Development" and enable "USB debugging".



  2. Then drag the status bar down and tap on "USB connected".



  3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".



  4. A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

Samsung Galaxy S2 (Android 4.0)

  1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > More... > USB utilities" and tap on "Connect Storage to PC".



  2. Then plug the USB cable into the device and connect to your computer.



  3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".



  4. A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

Jan 09, 2015 | Samsung Cell Phones

1 Answer

I have down loaded and installed the driver but still when i plug my phone into computer its not there. If i choose media player it does not show up in Windows media player. if I choose Mass Storage it...


Well, when you connect as mass storage, there is an usb icon on status bar on your phone. Select it and there will be written something like Select to turn on/off usb connection. Once you turn it on, you will get a prompt on your computer as it will see your phone storage card as mass storage.

Aug 02, 2011 | Samsung Galaxy S GTI9000 Smartphone

1 Answer

How do I set the HTC Inspire to USB Mass Storage Mode?


Hi. Thanks for choosing fixya.
1) Press the menu botton(lower part of the phone)
2) Press "SETTINGS"
3) Look for: "CONNECT TO PC"
4) Select "DISK DRIVE"(If your not connected press "default connection type", THEN select DISK DRIVE.
That will give you access to the storage of your phone.

Jun 03, 2011 | HTC Inspire 4G Smartphone

1 Answer

Every time i plug in my sony camera to the usb port to upload my pictures, my camera will say " usb mode. connecting to mass storage" then that will go away after a few seconds and then it...


Hi,

The "USB mode" and "Connecting to Mass Storage" message will get displayed when the Camera is connected to the Computer and is recognized by the Computer as a Mass Storage device. This is not an error message and is a normal operation.
You can change the Mass Storage settings in the Camera (depends on the model) The USB Select or USB Connect option in the Camera can be changed to PTP, Mass Storage or PictBridge mode. Set the option in the Camera to PTP and connect it to the Computer and check if the Computer is recognizing the connection. Once the computer is recognized, it appear as a removable Drive.
You can transfer the images from the Camera to the Computer from the Removable Drive by copying and pasting.

Thanks for contacting FixYa.

Apr 07, 2011 | Sony Cameras

2 Answers

I recently bought an Alcatel OT-606 phone, and decided to add some music to it. I connected it to my computer with the USB cable that was included with the phone, and the computer acted as it should when a...


I HAD THAT PROBLEM TOO, BUT WHEN I TURNED THE PHONE OFF, I GOT A REMOVEABLE DISK "g" APPEAR WHICH WAS THE PHONE, I COULD DOWNLOAD MUSIC AND STUFF TO IT WHILST IT WAS OFF , BUT NOT ON, I CHANGED MY PHONE TO BE HONEST,I COULDNT FIND ANOTHER WAY OF DOWNLOADING ONTO IT WHILST IT WAS ON. HOPE THIS HELPS A LITTLE

Jan 08, 2011 | Cell Phones

1 Answer

WITH SERVICE PACK 3 (WIN XP) MY 795 IS "DISCONNECTED" NO MATTER WHAT! PLEASE HELP!!


The iFP-795 is a player that has connection type UMS
(also called MSC): seeing the player as a removable disk:
Go to next site to see the connection type:
http://www.iriver.com/flash/index.asp?code=0300
and click on connection. Scroll down to see the iFP-700 series listed in the connection type UMS.
UMS = Universal Mass Storage
MSC = Mass Storage Class

With XP sp3 the computer Operating System has setup USB connections with new drivers, that support both UMS (= MSC) and MTP connections.
MTP = Media Transfer Protocol

When you experience next making connection:
Connecting the device to the computer Wizard found new hardware pops up.
Only this time the Windows update searching for software will not work on automatic routine: ending up with "Cannot Install this Hardware".

Manual performing the wizard, setting the device to USB connection type:
1. Can Windows connect to Windows Update to search for software ?
Select "No, not this time".
[Next]
2. If your hardware came with an installation CD, or floppy disk, insert it now.
Select "Install from a list or specific location(Advanced)."
[Next]
3. Please use your search and installations options.
Select "Don't search I will choose the driver to install."
[Next]
4. Select the device driver you want to install for this hardware.
Select "USB Mass Storage Device."
[Finish]

Just post a comment if you need more help.

Sep 24, 2009 | iRiver iFP-795 MP3 Player

1 Answer

My sony cybershot DSC-W35 digital camera says Format error


Hello,

In regards to your settings on your camera, I would suggest trying Auto first and then Mass Storage second. Auto in theory should detect the proper settings needed and adjust automatically. Mass Storage setting would treat the camera with your card like a flash (thumb drive) and would work also, however the software included with your camera will most likely work best with the auto setting. One quick question before we get too deep into this, is the card in your camera a brand new one or does it have pictures on it?

May 30, 2009 | Sony Cameras

6 Answers

Sigmatel s4


hi there!
you first have to install the driver software for your cell phone...
as in windows Xp it shows MT6225...
after installing the usb drivers when you connect your cell with usb cable on the cell phone a menu will appear...
- Mass Storage
- Com Port
- Camera
you have to select the mass storage option then your cell will show it self as a usb disk in PC... and if you have Memory card then there will be two usb drives appear in your My Computer Window....
you just have to copy paste your files...

Aug 29, 2008 | Handmark Software MobileLists (950142) for...

1 Answer

Laptop VISTA basic will not recognize 3.5" Nexxtech enclosure as mass storage device


run diskmgmt.msc there it will show all disk drives. if it detects usb mass storage and the hd is not showing. soulds liek hd is bad or jumper set wrong

Apr 28, 2008 | NexxTech Portable Hi-Speed USB 2.0 Kit...

1 Answer

I can't download music to my phone


Did you able to see Removeable Disk after connecting to PC?
If not then there are two possiblities...
1. Check the setting of USB mode at
Connectivity > USB Connection Mode > Mass Storage
It should 'Mass Storage'.
2. Even though Mass Storage is there and you are still not get Removeable Disk then replace Phone's memory card with SandDisk's Memory card.

Once you verify above two points you will get Removable Disk, and then you can make Copy/Paste to download songs into your phone.

Jan 18, 2008 | LG CU500 Cellular Phone

Not finding what you are looking for?
LG Shine KE970 Cellular Phone Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Cell Phones Experts

skiffy99
skiffy99

Level 1 Expert

21 Answers

Raphael Josiah

Level 2 Expert

86 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a LG Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...