Check the rear or side of the phone base to ensure that the ringer is on and that the volume is set to the highest level.
SOURCE: uniden 5.8Ghz phone.
You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.
SOURCE: phone flashes but no volume for 4 rings on incomming call
The phone has to be a member of an ICD group and have the ring set to immediate. Since this is a SYSTEM program, I don't think you can change it without the assistance of a programmer.
If you somehow have access, it's changed in programs 620-622. You need to know which group is assigned, usually group 1 put you can find that in 622. Members are set in 620 and the ring delays are in 621.
Carl
SOURCE: My lucent Merlin ETR 18D
hello,
i want you to go your phone setting, press the menu,scroll to profile, select the profile you are using and personalize it.
however, when personalizing scroll down to ringing type and select the ringing type you want.
if this does not work, open the phone, remove the ringer [the ringer is a small metal touching the panel of the phone, read it with meter, if it does not read, change it and replace it with a good one.
then if you want to reset both phone and base,131 views
Usually answered in minutes!
×