Question about Indesit W 123 Front Load Washer

1 Answer

Indesit washing machine not spinning - fault code timer and dor lock light flashing

After water pumps out, machine doesn't go on to a sull spin. It starts to spin, then stops again. The pump is running and the pipe clear. I have put the drain pipe into a bowl and emptied the water whilst this is running, and still it doen't go to full spin. The timer light and door lock light flashes.....

Posted by on

  • malcolmbates
    malcolmbates Feb 11, 2012

    I have the W131 model and does the same.. part way through the wash, it stops and lock light flashes as doe one of the other lights... pump works but doesn't pump out.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My indesit washer/dryer wd12x programme dial goes all the way when it reaches spinning

Posted on Jan 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix f-05 error


Error F05 on some Hotpoint washing machines means the pressure switch has "jammed" on, so the machine thinks it's full of water and refuses to spin. It may indeed be full of water - but not necessarily.
This error code is used on some Indesit washing machines too
Before a washing machine spins the laundry it needs a signal that the water has pumped away successfully so it knows that it's safe to spin. This error indicates that for various possible reasons it's not getting that signal.
This can be caused by a pump fault or blockage in the filter, but if this is the case then clearly when the fault occurs it should be stuck full of water or at least still have a fair amount inside.

Dec 17, 2014 | Washing Machines

1 Answer

Flashing lights


There is a Light Flashing on my Indesit Washing Machine


Many of our newer Indesit Washing Machines have a series of indicator lights, which flash to indicate a possible fault on your installation or simply to let you know a problem occurred whilst you were away from your Indesit Washing Machine.


Pre wash light flashing
Indicates a failure of your Indesit Washing Machine to fill correctly. Check your fill hoses for a blockage, a leak, a kink or to make sure that they are turned on.

Wash light flashing
Indicates that your programme dial has been moved from its original position. Simply returning the wash dial to its original position will restore the light to its original status.

Spin light flashing
Indicates that the Indesit Washing Machine has considered the wash load to be excessively un-balanced. Open up the door of the Indesit Washing Machine, re-distribute the garments and retry the spin to resolve this.

End light flashing
Indicates that the Indesit Washing Machine has reached the end of a wash programme.

Wash, rinse and spin lights all lit at the same time would indicate a possible blockage in your under sink wastes system. Check out the additional informationin our 'My Indesit Washing Machine Will Not Empty'

Aug 22, 2012 | Indesit Washing Machines

1 Answer

WIDL126 flashing light No3 extra rinse). Machine starts to fill with water then the drum spins twice (a little too fast I think), then drains and just stops and the door lock light flashes fast along with...


If spin speed happening during what should be Wash speed then sounds like faulty speed control module/ could also be Tacho has fallen off end of motor;small round coil operated by a magnet which pulses a speed control circuit in the module/check also pump is okay and filter clean.Try resetting if you can,book will show you how to..Good luck

Apr 07, 2011 | Indesit Washing Machines

1 Answer

Hotpoint aquarius WML540, HAS JUST STOPED WORKING ITS ONLY OVER 1 YEAR OLD,WILL START ANY WASH BUT JUST STOPS WHEN IT REACHES THE SPIN AND DRAIN AND ALL LIGHTS START TO FLASH VERY FAST CAN YOU HELP.


Could be the pump blocked or not working, check the pump for blockages or wiring faults. For Hotpoint, Creda and Indesit error codes that include flashing lights visit selfix-uk

Mar 20, 2010 | Washing Machines

1 Answer

Door lock light doesn;t come on and won't spin.


Hi
There is a very good chance that you have a clogged pump. The machine senses that there is still too much water in the machine and will not go into the high spin. Another possiblity is that it thinks that the door is not locked and will not go into the high spin. Usually you will get a fault code with the door lock but not necessarily with the clog. To see if it is the belt just run the machine on an empty load. It it spins, change the belt. If not check for clog or door lock.
Thanks for contacting fixya.com

Oct 30, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Indest wil103 has 3 flashing lights the power one and to green ones stain remover and extra rinse and want spin what is wrong please help


If the machin isnt able to evac the water, it wont spin. It will indicate error with 2 flashing lights + lock led. Check pump, drain hose.

Jul 26, 2009 | Indesit W 123 Front Load Washer

2 Answers

Indesit washer dryer stops halfway through a wash....


depends on what lights are flashing this is your fault code

Mar 28, 2008 | Indesit W 123 Front Load Washer

4 Answers

Indesit Standard WIL 123 (UK) Washing Machine


Had a similar problem ,flashing red led means door not locked, I removed door from machine removed front from door and found hinge pin for lock had come adrift, religned pin and chapped back into position .THen replaced door and door to machine .dor shut and lock worked perfectly, hope this helps

Jan 04, 2008 | Indesit W 123 Front Load Washer

4 Answers

WD12 Indesit washer/dryer


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: Timer- If your washing machine fills with water and begins agitating, but the timer won't advance. Then you need to replace the timer. Water supply problem- If water doesn't enter the machine when you start the process- check water entrance pipe, myaybe it was bend (if you have there a tap - see it is open). Check that water entrance valve works (it is an electromagnet valve,loocated at the pipe's enterance to the machine). If it doesn't work, test that it get power. In case it doesn't get power, it seems that the problem is with the timer unit. In case it get power and dosen't work - You can easyly open the valve and clean it (from scale or other dirt). Be aware you should disconnect the power cable from machine before doing it !!!!! Check as well for valve's coil resistance. In case you have no resistance measurement - you should replace for a new valve.

Mar 22, 2006 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

2,030 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

Darren Moxam
Darren Moxam

Level 2 Expert

67 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...