Question about Whirlpool LGV4634JQ Gas Dryer
Having difficulties replacing belt on my simpson maxidry clothes dryer 505 SR
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
your dryer has a start assist compressor go to this site to see it and that could very well be the problem. www.repairclinic.com/SSPartDetail.aspx?s=t-39p400-%3d%3db166i938994%PartID=938994
Posted on Mar 12, 2009
sounds like it needs to be cleaned out,check outside to seeif the flapper is blowing open or if it is clogged with lint,if you have a leaf blower take vent line off of back of dryer and blow it out,vac inside of dryer and clean out the lint filter duct,if it's gas you should do this every year so you don't have a fire,electric every two years
Posted on Nov 08, 2009
Hi there, There is a switch at the bottom of the dryer. It has a groove for the spring to fit around. Then the spring goes through the metal tag with the holes in the pulley. The pulleys 2 prongs then fits into the slot near the motor. The belt goes through the pulley and around the motor wheel. When fitting the drum, tape the belt at three points on the drum with the machine door facing down making installation easier. Once installed remove the tape. The dryer now works like a dream. See the attached photo. Good Luck!
Posted on Jun 29, 2010
Tips for a great answer:
Nov 21, 2017 | Dryers
Jun 17, 2011 | Dryers
Jun 21, 2010 | Dryers
Nov 08, 2009 | Dryers
Oct 08, 2009 | Washing Machines
Jul 06, 2009 | Dryers
Apr 19, 2009 | Electrolux Dryers
Oct 27, 2008 | Dryers
583 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: