Question about D-Link DI-624 Air Plus XtremeG Wireless 108G Router (790069250842)

1 Answer

I forgot my username and password and want to create a VPN or remote connection

I have reinstalled an old D-Link DI 624 system on my PC. The router apparently has an old password and network name (that I don't remember) so I cant enter the network with my new lap top (which is the reason I dusted the old router in the first place) Don't have any of the manuals/cd's etc... Please help! I'm pretty IT inexperienced! I have a D-Link 624 Wireless 108G Router. I have my home laptop, my business laptop, my PS3 and my Wii all connected with this router. I have an Iphone& a mobile laptop that i am trying to create a VPN or remote desktop connection with my business laptop at home while im on the road. The problem is i forgot my username and password for my router to be able to set my connection. I have the install disk but i am concerned that by reseting my router i will lose my connection with all my other hardware. Please advise if this is an issue with reseting router. How to go about reseting router if needed? and any help you can give me on setting up my VPN or remote connection would be greatly appreciated. Thank you pdt826

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If you've forgotten the username and password, there is really no viable solution other than resetting the router. All the software can be found on linksys' website, along with manuals for reconfiguring your router. Breakout your trusty paperclip and press the reset button on the back of the router. Reconfiguring should only take a few minutes. The default username will be "admin" and the default password is "password" (both without the quotes.)

Manual

No software is actually required to install the router. Any information needed will be in the manaul, provided above.

Hope this helps!

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot username and password for my D-link DI- 624 how do I reset ?


At the back of the modem is a reset button. hold that down for 3 seconds.

The Ip will now be 192.168.0.1 and username: admin
No password.

Sep 10, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

We reset the d-link di-624 wireless router and now it will not let us sign back on without the username and password which we do not remember. how do i factory reset the router?


Hi, when you reset your router the password is reset to default, and that default is admin admin. And to reset it, at the rear is a small hole in the hole is a button, remove from the power, and depress the button for a few seconds, then connect the power and try to logon again with your browser using the default settings.
It is also all explained in your user manual link below...
http://www.retrevo.com/support/D-link-DI-624-Wireless-Routers-manual/id/420ci368/t/2/

Aug 18, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

How can I reconfigure my access point on my DI-624 to 802.11a?


First press reset button for 10 seconds it is in back side of router.
Then connect router to computer with ethernet cable then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration page.
Enable DHCP if you want to get ip from router for your LAN.
Go to wireless enable it .
Then enable wi fi security wep security then enter WEP key it is your password to connect internet .
Then save settings and restart router.
Let me know if you need more assistance.
Thanks.

Oct 01, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

USER NAME AND/OR PASSWORD


There is no way to obtain your username and password. Not an easy way anyways.

Your best bet is to reset the router, and reconfigure it. Good Luck.

Jun 20, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

I have reinstalled an old D-Link DI 624 system on my PC. The router apparently has an old password and network name (that I don't remember) so I cant enter the network with my new lap top (which is the...


Resetting the router would clear the username and password. The you can go to 192.168.0.1 in your browser and set a new username and password.
D-Link Router reset
Step 1 Locate the reset pinhole on the back of the unit.
Step 2 With the unit powered on, press and hold the Reset button.
Step 3 Hold the Reset button for about 10 seconds.
Step 4 Release the Reset button.
Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.
Step 6 The device is now at factory defaults.
Note: Do not recycle power during the reset procedure. The default user name for most D-Link devices is admin and the password is left blank.
When it says hold for about 10 seconds, don't hold for more than ten seconds or the procedure will likely fail, if ten seconds doesn't work try 5 seconds.

The user manual is on this link:
http://www.scribd.com/doc/2091490/DI624-manual
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 19, 2009 | D-Link DI-624 Air Plus XtremeG Wireless...

1 Answer

Re-installing DI-624


Access the configuration page of your router by default its 192.168.0.1, Login to the Dlink page by default the Username is Admin and Password is Blank and then reconfigure your router for Internet connection.

Dec 30, 2008 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

Password problem


Open out a paper clip, pull the power connection out of the back of the DLink.
On the back of the DLink is a tiny hole with "reset" written above it, poke the end of the paper clip into the hole untill you feel a tiny switch click down, hold the switch down and put the power plug back in (this takes three hands) hold the switch down for ten seconds and your modem/router will be set back to factory settings.
username Admin
password Admin
try admin and try with username only or with password only.
It's been a month or two since I did a DLink and I cant remember which it is.

Jul 22, 2008 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

Using DI-624S ... VPN works fine through CAT5 but not wireless


Hi,
I resolved my issue by updating the DI-624s firmware.
regards,
boreeeeec

Jun 09, 2008 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

D-link DI-624


Hello, 192.168.0.1 is usually the default address. If the router is connect to the PC or Laptop with a straight through ethernet cable, browser should connect. The only reason is the default has been changed. The easiest thing would be to set the router back to default. Push reset on back of router for 5-10 seconds. Then try to access with default address. Username is "admin" leave password blank. Hope this helps.

Mar 21, 2008 | D-Link DI-624 Air Plus XtremeG Wireless...

1 Answer

VPN


This example will demonstrate how to create a Virtual private Network (VPN) between two remote locations through the Internet. The VPN policy will use 3DES IPSec to securely send/receive encrypted data over the Internet. When the VPN tunnel is enabled, the two offices will virtually appear to be on the same local network. This example will consist of two DI-804V VPN Routers with a simple setup. The two remote offices in this example will be known as Office A and Office B. Both VPN Routers must already be set up and able to access each other. This is only an example, your setup will vary using the WAN IP address provided by your ISP. Please note the differences in the IP addresses for each office. We will begin by configuring the DI-804V at Office A. Start by going into VPN Settings under the Basic Setup menu. Step 1. In the Connection Name field, type in OfficeA. Click ADD. Step 2. A properties screen will appear for the new connection you have made. Fill in the appropriate information for Office A: Connection Name: OfficeA Local IPSEC Identifier: Local Remote IPSEC Identifier: Remote Remote IP Network: 192.168.1.0 Remote IP Netmask: 255.255.255.0 Remote Gateway IP: 192.170.0.2 Network Interface: WAN ETHERNET Secure Association: IKE Perfect Forward Secure: Enabled PreShared Key: 123456 Key Life: 28800 IKE Life Time: 3600 Step 3 Click SAVE. There should now be a VPN policy created for Office A. Now you will want to Save & Restart the DI-804V. Note: 123456 is an example of a preshared key, please fill in any secret preshared key you desire. Keep in mind that both sites require the same preshared key. Office A setup is now complete, we will now configure Office B with the other DI-804V, Follow the same steps previously with Ofice A to create a VPN policy. Step 1 Please change the appropriate information. Connection Name: OfficeB Local IPSEC Identifier: Local Remote IPSEC Identifier: Remote Remote IP Network: 192.168.0.0 Remote IP Netmask: 255.255.255.0 Remote Gateway IP: 192.170.0.1 Network Interface: WAN ETHERNET Secure Association: IKE Perfect Forward Secure: Enabled PreShared Key: 123456 Key Life: 28800 IKE Life Time: 3600 Step 2 Click SAVE. There should now be a VPN policy created for Office B. Now you will want to Save & Restart the DI-804V. After the VPN policies have been created for the two Offices, the two remote locations should authenticate and connect. To view the status of the VPN connection, go to the Device Status menu. On the bottom-left side of the menu, click on the VPN Status icon. A VPN Status pop-up screen will appear showing VPN connection status. If a VPN tunnel is active, the State should indicate Q-Estab. Go to a DOS prompt and ping the internal IP address of the remote network.

Feb 16, 2006 | D-Link DI 804V (DI-804V) Router

Not finding what you are looking for?
D-Link DI-624 Air Plus XtremeG Wireless 108G Router (790069250842) Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...